1 / 19

D-STAR InfoCon 2014 at Dayton Hamvention Part 1 – Intro to D-STAR

John Davis WB4QDX. D-STAR InfoCon 2014 at Dayton Hamvention Part 1 – Intro to D-STAR. What is D-STAR?. D-STAR is an open standard for digital voice and data on Amateur Radio One of several digital modes in Amateur Radio Developed by Japan Amateur Radio League (JARL)

chace
Download Presentation

D-STAR InfoCon 2014 at Dayton Hamvention Part 1 – Intro to D-STAR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. John Davis WB4QDX D-STAR InfoCon 2014at Dayton HamventionPart 1 – Intro to D-STAR

  2. What is D-STAR? D-STAR is an open standard for digital voice and data on Amateur Radio One of several digital modes in Amateur Radio Developed by Japan Amateur Radio League (JARL) Uses AMBE vocoder chip from DVSI Icom is first manufacturer with base, mobile, handhelds and repeater equipment Connect Systems planning D-STAR handheld for 2014 Other vendors offering other products

  3. How does D-STAR work? • Voice is converted to digital modulation and transmitted at 4800 bps • 2400 bits for voice • 1200 bits for Forward Error Correction on voice • 1200 bits for data (error correction usually in applications • True narrowband digital signal • Voice and data occupy one 6.25 KHz signal (versus 12.5 KHz FM voice, P25 and MotoTRBO) • Can operate simplex, repeater or linked to other repeater(s)

  4. What can D-STAR Do? • Transmit or receive voice and 1200 baud data simultaneously on 2m, 440 and 1.2 GHz (no TNC required) • 128 Kb data transmission on 1.2 GHz with Internet connectivity (Ethernet bridge to Internet with IP address) • D-PRS (digital APRS) automatic position reporting simultaneous with voice with GPS • Flexible repeater linking with Gateway and Internet connection • Reflectors act as conference bridge for linking multiple repeaters (60+ DPLUS Reflectors now in operation worldwide) • DV Dongle, DV Access Point (DVAP) and DV Node Adapters allow voice and data access to D-STAR via Internet connection (similar to EchoLink)

  5. D-STAR Growth Continues As of May 1, 2014 – 1,111 DPLUS Gateways, over 2,575 Voice Repeaters, 218 Data Modules and 34,298 registered users on US Trust Server and 62+ DPLUS reflectors in operation Other users, repeaters and reflectors on DCS and XREF systems D-STAR has largest base of users and repeaters of all digital modes

  6. D-STAR Equipment D-STAR radios (mobiles, handhelds, repeaters) commercially produced by ICOM D-STAR handheld by Connect Systems available in late 2014 DV Dongle is non-radio device allowing access to repeaters and reflectors via Internet (similar to EchoLink) DV Access Point (DVAP) creates low power hotspot via Internet Node Adapters converts FM transceiver to D-STAR hotspot via Internet

  7. Icom Radios • Offers line of mobiles, handhelds and repeaters • Most radios are dual band (2m, 70cm) • ID-31A is 70cm only • ID-1 is 23cm only, allows high speed data • All radios operate standard FM and D-STAR digital modes • All Icom radios have built-in serial port for data transmission • All offer GPS as built-in, a part of speaker/mic or connection via serial or USB port

  8. Icom Mobiles • IC-2200 and ID-800 were initial mobiles • D-STAR board can be added to IC-2200 • ID-880 updated ID-800 with improved user functions • Dual-band, single receive mobile • IC-2820 is full featured mobile • Dual-band, dual receive • Built-in GPS with external antenna • New ID-5100 mobile offers new features • Dual-Band, dual receive • GPS built into head unit • Touchscreen display • Optional Bluetooth interface • DR Mode with 1200 included memories

  9. Icom Handhelds • IC-91AD was initial D-STAR handheld • Dual-band, dual receive • IC-92AD dual-band, dual receive • Slightly larger frame with more heat sink • Waterproof • GPS spkr/mic optional accessory • IC-80 introduced as lower cost handheld • Dual-band, single receive • GPS spkr/mic accessory available • ID-31A is 70cm handheld • Waterproof • SD card for memory storage, update memory from downloads • Built-in GPS • User friendly DR Mode, locate closest repeater • ID-51A is latest dual band handheld • All features of ID-31A, but dual band, dual receive

  10. ID-1 for 1.2 GHz Voiceand Data Operates FM, Digital Voice (DV), low speed data and high speed data (DV) High speed data connection is Ethernet compatible Acts as Ethernet bridge

  11. DV Dongle Produced by Internet Labs, available at major ham dealers Provides access to D-STAR repeaters via PC without radio Small module connects to PC via USB Uses PC sound card for mic/speaker audio Windows software runs efficiently on PCs, Netbooks, Windows tablet Coming to Android tablets, smartphones Java-based software for Mac, Linux Connect to repeaters, reflectors, send data, view history.

  12. DV Access Point Produced by Internet Labs, available at major ham dealers Creates instant local access point for limited area without D-STAR repeater Connects to PC via USB Includes 10mw 2m transceiver and stubby antenna Use HT, other D-STAR radio nearby for full network access without local repeater Windows software module for configuration and operation

  13. DV Node Adapters/GMSK Modems • Provides D-STAR interface to FM radio • Can be used to create hotspot or repeater • Can create D-STAR compatible radio with Dongle

  14. D-STAR Repeater Architecture Linux Gateway PC Running G2 Gateway software Runs third-party apps, Dongle, DVAP

  15. The Registration Process • Why register? • Registering your callsign allows access to more functions (callsign routing, linking) • Register on your local or the closest system • Register on one and only one system (local registration syncs with all systems throughout world) • Registration is a three-step process (all three steps must be completed)

  16. Starting Registration 16 • Step 1 – Browse to desired system and register as new user (https://callsign.dstargateway.org/Dstar.do)

  17. Fill Out Your Info • Fill out the info (callsign, name, email address and desired password) • Step 2 – System administrator must approve your initial registration. You may need to send email to admin.

  18. Add a Terminal Note: You only need one terminal, a “space” for use. Adding more terminals can add confusion • Step 3 – Add at least one terminal with a space in first row under Initial, then type a pc-name (lower case, e.g. wb4qdx-dstar)

  19. Add Your Callsign to Radio • For a radio, program your callsign (caps, no spaces) in MYCALL or MY field • Found in Menu under MY STATION in newer radios • For a DVAP, DV Dongle or Hotspot, program call in callsign field exactly as entered in registration terminal • Get on and talk!

More Related