1 / 15

Laboratory Safety Awareness Presentation

The Laboratory safety presentation is designed to help laboratory in increasing safety awareness as well as safety requirements. Implementation of proper Laboratory Management System improves quality observed in daily laboratory practices.

Download Presentation

Laboratory Safety Awareness Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Laboratory Safety Awareness

  2. Laboratory Safety Laboratory Safety Laboratory safety rules and safe work practices or standard operating procedures (SOPs) should be established by Faculties, Schools and Disciplines to meet specific operational needs and to reduce the risks associated with laboratory hazards.  As a condition of entry to a laboratory, all individuals must complete a laboratory safety induction and receive specific training in local safety rules and laboratory procedures relating to their work (including relevant SOPs). Individuals are required to comply with laboratory safety rules and procedures at all times whilst in the laboratory. Individuals who act contrary to the rules and procedures should be excluded from the laboratory.  www.certificationconsultancy.com

  3. Requirement of Laboratory Safety Laboratory Safety • Wear laboratory coats or other protective clothing at all times in areas where radioactive materials are used.   • Wear deposable gloves at all times while handling radioactive materials  • Either after each procedure or before leaving any area, monitor your hands for contamination in low-background area.   • Do not eat, drink, smoke, or apply cosmetics in any area where radioactive material is stored or used.   • Do not store food, drink, or personal effects in areas where radioactive material is stored or used.   • Wear required personnel monitoring devices at all times while in areas where radioactive materials are used or stored.   • Dispose of radioactive waste only in designated, labeled and properly shielded receptacles. • Never pipette by mouth.   • Confine radioactive solutions in CLEARLY labeled containers.   • Secure all radioactive material when not under the constant surveillance and immediate  control of the authorized users and their staff. www.certificationconsultancy.com

  4. Laboratory Hazards Laboratory Safety • Laboratory hazards fall generally into one of five categories: • Biological - eg pathogenic microorganisms, animals, biological tissues, blood and other body fluids • Chemical - eg corrosive, flammable, toxic • Physical - eg noise, radiation, manual handling • Electrical/Mechanical - eg high voltage apparatus, machinery with moving parts • Psychological - eg emotional stress, workplace bullying www.certificationconsultancy.com

  5. General Hazard in Laboratory Laboratory Safety • Fire • Breakage of glassware • Sharps • Spillages • Pressure equipment & gas cylinders • Extremes of heat & cold • Chemical hazards • Biological hazards • Radiation www.certificationconsultancy.com

  6. How to do Risk Assessments? Laboratory Safety • Determine hazards and evaluate risks • Use all relevant available data • Determine controls needed to minimise those risks • Document the assessment • Agree it with your supervisor • Use those control measures www.certificationconsultancy.com

  7. General Rules of Lab Safety Laboratory Safety • Listen to or read instructions carefully before attempting to do anything. • Lear safety goggles to protect your eyes from chemicals, heated materials, or things that might be able to shatter. • Notify your teacher if any spills or accidents occur. • After handling chemicals, always wash your hands with soap and water. • During lab work, keep your hands away from your face. • Tie back long hair. • Roll up loose sleeves. • Know the location of the fire extinguisher, fire blanket, eyewash station, and first aid kit. • Keep your work area uncluttered. Take to the lab station only what is necessary. • It is suggested that you wear glasses rather than contactlenses. • Never put anything into your mouth during a lab experiment. • Clean up your lab area at the conclusion of the laboratory period. • Never “horse around” or play practicaljokes in the laboratory. www.certificationconsultancy.com

  8. What is Electric Safety Laboratory Safety • Lay electrical cords where no one can trip on them or get caught in them. • Be sure your hands and your lab area are dry before using electrical equipment. • Never poke anything into electrical outlets. • Unplug cords by pulling the plug and not the cord. • Unplug all electrical equipment at the end of the labperiod. www.certificationconsultancy.com

  9. Gas Cylinders Laboratory Safety • Never use without formal training • Minimise the number in a laboratory • Store externally whenever possible • Cylinders are heavy and can do serious damage to you if they fall • Ensure that they are chained when in use • Move only with a cylinder trolley • Use regulators & control equipment suitable for the gas concerned • Consider the consequences if your cylinder leaks www.certificationconsultancy.com

  10. Why Important of Lab Safety? Laboratory Safety • Adverse health effects from exposure to chemicals • Exposure to organisms, diseases, etc. in laboratories • Laboratory equipment hazards - if not maintained properly www.certificationconsultancy.com

  11. When Lab Safety Review? Laboratory Safety • New employees • New procedures • A change in procedures • New equipment www.certificationconsultancy.com

  12. Equipment of Lab Safety Laboratory Safety • FIRST AID AND MEDICAL TRT • EMERGENCY EQUIPMENT • SHOWERS, EYEWASH STATIONS • MSDS’S • PPE www.certificationconsultancy.com

  13. First Aid in Laboratory Laboratory Safety Injury: Burns To do: Immediately flush with cold water until burning sensation is lessened. Injury: Cuts, bruises To do: Do not touch an open wound without safety gloves. Pressing directly on minor cuts will stop bleeding in a few minutes. Apply cold compress to bruises to reduce swelling. Injury: Fainting To do: Provide fresh air and have the person recline so that their head is lower than the rest of their body. www.certificationconsultancy.com

  14. First Aid Laboratory Safety Injury: The eyes To do: Flush eyes immediately with plenty of water for several minutes. If a foreign object is lodged in the eye, do not allow the eye to be rubbed. Injury: Poisoning To do: Find out what substance was responsible for the poisoning and alert the teacher immediately. Injury: Spills on the skin To do: Flush with large quantities of water. For acid spills apply bakingsoda solution. For base spills apply vinegar or boric acid. Injury: Electrical shock To do: Shut off the current at the source. Remove wire with rubber gloves. Alert the teacher immediately. www.certificationconsultancy.com

  15. Laboratory Safety Thank You for Attending Presentation Buy Laboratory Safety Awareness Training Presentation Kit (More than 400 ppt slides and handouts) www.certificationconsultancy.com

More Related