1 / 32

Multi-tasking

Multi-tasking. OKUMA Multus B300W. Multi-tasking. Mori-Seiki NT. Multi-tasking. Mazak Integrex Mark IV. Multi-tasking. Machine Definition. Multi-tasking. Axis combinations. Multi-tasking. Axis combinations. Multi-tasking. Stock Setup. Multi-tasking.

cerelia
Download Presentation

Multi-tasking

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Multi-tasking OKUMA Multus B300W

  2. Multi-tasking Mori-Seiki NT

  3. Multi-tasking Mazak Integrex Mark IV

  4. Multi-tasking Machine Definition

  5. Multi-tasking Axis combinations

  6. Multi-tasking Axis combinations

  7. Multi-tasking Stock Setup

  8. Multi-tasking Tool Setup – Define lathe tools in B=0 position.

  9. Multi-tasking Tool Setup – Define lathe tools in B=0 position. MazakIntegrex Okuma Multus Mori Seiki NT

  10. Multi-tasking Tool Angle – One tool can be defined to work in any possible configuration using Tool Angle Tool Angle = BA: Angle (Okuma Multus) Tool Orientation on Machine: Indexes a tool to work on Left spindle or Right spindle and for back turning on either spindle (M602 or M603- Okuma Multus)

  11. Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Okuma Multus - M602 or M603) N220G97 G95 S=3800 M42 M602 BA=90. TL=011011

  12. Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Mori-Seiki NT D1 or D2)

  13. Defining Lathe tool output Tool ID Code: MR2 For consistency, the general guidelines below are suggested

  14. Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Integrex Mark IV - Matrix) (PROGRAM NAME - MULTI-TASKING DEMO_MJR1 DATE=DD-MM-YY - 22-02-09 TIME=HH:MM - 13:47 ) (POST LICENSE - IN-HOUSE SOLUTIONS INC.) (T11 | CNMG 08 OD R | DIA. - 11 | SUFFIX - .02 | INSERT - CNMG 12 04 08) G21 G69 G80 G40 G18 G90 G94 M205 (UPPER TURRET) G109 L1 (T11 | CNMG 08 OD R | DIA. - 11 | SUFFIX - .02 | INSERT - CNMG 12 04 08) (TOOLPATH GROUP - PREP STOCK ) G21 G10.9 X1 N1 G91 G28 X0. N1 G28 Y0. Z0. M901 M202 T11.02 T11 M06 G91 G28 X0. Z0. G90 M108 G0 G90 G53 B90. M107 G54 . . .

  15. Multi-tasking N220G97 G95 S=3800 M42 M602BA=90. TL=111111 N230 M4

  16. Multi-tasking Program: Facing / Drilling / ID Boring

  17. Multi-tasking Misc Ops: Stock Flip

  18. Multi-tasking Misc Ops: Stock Flip

  19. Multi-tasking Face / Drill / ID Bore (rough) / ID Bore undercut finish

  20. Multi-tasking ID Bore undercut N220G97 G95 S=2816 M42 M602BA=-10. TL=330933 N230 M4

  21. Multi-tasking OD Rough / Finish / Plunge Cut Parameters

  22. Multi-tasking OD Finish Back turning N220G97 G95 S=509 M41 M603BA=90. TL=004004 N230 M3

  23. Multi-tasking Finish ID / Thread OD

  24. Multi-tasking Mill slot / Transform toolpath T/Cplane TOP in Mill is C=90. BACK is C=0 . . . N210G94 SB=2000 M241 M63 M9 BA=90. G52 TL=303030 N220 M13 N230 G138 N240 G17 N250 M146 N260 G0 C90. N270 M147 N280 G127 B90. N290 G0 Z155. N300 X37.5 Y0. N310 Z65. . . .

  25. Multi-tasking Circle Mill counterbore / Drill / Tap angled holes

  26. Multi-tasking Misc Ops: Stock Flip back to OP1 position Geometry exists already. Transfer geometry not required

  27. Multi-tasking Stock Flip – Original position

  28. Multi-tasking Face – Stock recognition

  29. Multi-tasking Rough / Semi-finish ID

  30. Multi-tasking Rough OD / Finish OD

  31. Multi-tasking Thread

  32. Multi-tasking Finish corners

More Related