1 / 8

Public Safety Radio System Pager Operation Motorola Minitor V

Public Safety Radio System Pager Operation Motorola Minitor V. What Was Purchased?. Two Frequency Store Voice with Scan and VIBRA-Page Frequency One will be Paging Channel Frequency Two will be County Wide

celestyn-leighton
Download Presentation

Public Safety Radio System Pager Operation Motorola Minitor V

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Public Safety Radio System Pager Operation Motorola Minitor V

  2. What Was Purchased? • Two Frequency Store Voice with Scan and VIBRA-Page • Frequency One will be Paging Channel • Frequency Two will be County Wide • Scan mode will have the Paging Channel set as the Priority Channel when in scan mode. Minitor V Operation Revision -

  3. Function Switch • Function switch will be configured to 4 different function modes (monitor/selective call, scan, etc.) can be configured for any position of the switch. • When set to a monitor position, all voice communications on the selected channel is heard through the speaker. When monitoring all ordered alert options are functional. Minitor V Operation Revision -

  4. Function Switch Configuration1 Channel Pagers • Function Switch • A - Selective Call F1, Vibrate Alert • B - Selective Call F1, Tone & Vibrate Alert • C - Selective Call F1, Tone Alert • D - Monitor F1, Tone & Vibrate Alert • F1 – Paging Channel Minitor V Operation Revision -

  5. Function Switch Configuration2 Channel Pagers • Function Switch • A - Selective Call F1, Vibrate Alert • B - Selective Call F1, Tone & Vibrate Alert • C - Monitor F1, Tone & Vibrate Alert • D - Priority Scan F2 • F1 – Paging Channel • F2 – FIREOPS1 Minitor V Operation Revision -

  6. Reset Button • After receipt of a properly coded message and after completion of that message, the alert monitor will automatically reset to the programmed operational mode. Minitor V Operation Revision -

  7. Scan (Two-Frequency Models Only) • All alert monitors that are equipped with two frequencies are capable of scanning the two channels for selective call or monitoring purposes. Minitor V Operation Revision -

  8. Unread Message Indicators • The red LED turns on if there are any unread messages. • The pager generates a reminder alert approximately every two minutes when an unread message exists. Minitor V Operation Revision -

More Related