Buying Balboa VS520 Hot Tub Heater and Spa Pack

1. Buying Balboa VS520 Hot Tub Heater and Spa Pack

2. Do you have a costly spa or hot tub heater that requires the spa pack upgraded or replaced? This is where the Balboa VS520 – premium hot tub system comes in. It’s the unit that can handle nearly every combination of electrical requirements. This hot tub heater and spa pack uses the latest M7 technology, the best spa technology available on the market. It has completely digital circuitry which means less failure, more accurate heating and simple to use. The Balboa VS520 hot tub heater is a premium hot tub heating kit perfectly designed to retrofit even the most existing spas. It features with a plastic exterior in order to protect against water entrance and corrosion. Its 5.5w heating unit can be installed into the existing PVC plumbing and can be wired for 60Hz and 240VAC convertible power. The use of integrated connectors in the circuit board makes the installation process easy and its effortless design eliminates the unnecessary energy costs. This spa heating pack comes with a heater unit, the circuit board and sensors. In addition to, the Balboa VS520 has some of the built-in programmable features like cycle programming, freeze protection, economy mode, sleep mode and self diagnosis. Also the Balboa spa heater has the ability to choose how much current will be drawn by choosing the number pumps to run. It has receptacles for two 2-speed pumps, one speed pump or blower, one circulation pump, one ozonator, one constant-on for audio or visual devices and one 12 volt light. Except light, all the receptacles can be switched to supply 230 volts or 120 volts.

3. Upon buying a Balboa VS520 spa heater, you will get VS520SZ pack with 2” heater tail pieces, plasticized control instruction sheet and complete instruction manual for retrofit situations. However, the VS520 spa heater belongs to the Value Series (VS) family of hot tub control systems. As discussed above, this system is designed using Balboa’s patented M7 temperature and water flow sensor technology as well as completely new universal control platform. Here are a few best reasons why buying a Balboa VS series spa heater makes perfect sense: Perfectly designed for ease of installation and service – The Balboa VS520 is based on the common universal platform that enhances feature flexibility while minimizing installation and configuration related issues. The VS family spa heater comes with unique, good feature flexibilities whereas its performance is competitive with much high-end products. The M7 technology helps the system in eliminating more failure prone pressure switches and simplifies the installation without drilling additional holes inside the spa.

4. Ultimate flexibility and feature-rich The Balboa VS520 hot tub heater has a plastic enclosure to get rid of water intrusion smoothly. The connectors present on the circuit board minimize wires and simplify the service.  The system has a single two speed pump, or an additional pump or a blower. The hot tub heaters feature a convertible power supply that can be wired for 120 or 240 volts, a 5.5 KW heater and support VL panels. Improved reliability Currently, most people have been using the M7 technology. The VS series of spa control systems are built using M7 technology that will deliver optimal performance and satisfaction. This universal control platform increases flexibility and reduces configuration related hassles. Final Consideration – When it comes to installing a Balboa VS520 hot tub and spa system, it’s wise to look no further than Cedar Tubs Direct. Please check out our available Balboa VS520, please visit our website at https://www.cedartubsdirect.com/.

5. Contact Us Northern Lights Cedar Tubs & Saunas 305 Mckay Ave. Unit #20 Winnipeg, Manitoba, Canada, R2G 0N5 Ph: 800 759 8990