1 / 21

The development concept of « JIZZAX PLASTMASSA » JSC in 2018-2032

The development concept of « JIZZAX PLASTMASSA » JSC in 2018-2032. GENERAL INFORMATION about perspective investment projects proposed for implementation at « Jizzax Plastmassa » in 2018-2032 years. 16. Amount of projects. including :

castello
Download Presentation

The development concept of « JIZZAX PLASTMASSA » JSC in 2018-2032

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thedevelopment concept of «JIZZAX PLASTMASSA» JSC in 2018-2032

  2. GENERAL INFORMATION about perspective investment projects proposed for implementation at «JizzaxPlastmassa» in 2018-2032 years. 16 Amount of projects including: - Planned and realised projects of modernization, technical and technological renovation of productions 16 Total cost of projects USD 30,14mln. Annual output USD 27,9mln. including annual export volume USD 2,9mln. New vacancies 150

  3. Investment projects proposed for implementation at «JizzaxPlastmassa» in 2018-2032 years.

  4. Investment projects 1. Production of new types of polymer products and consumer goods. Period: 2017-2021 years Cost: USD 840 000 • equipment — USD 730 000; • construction and installation works — USD 110 000. Objective of the project: Expansion of the assortment of consumer goods. The assortment of products is represented by small and large-sized household and garden household goods that are in high demand and widely used in everyday life and agriculture. Expected resultsfrom the project implementation, both in kind and in value: 1500 thousand tons p/a and of UZS 11,25 billions.

  5. Investment projects 2.BOPP film production Period : 2019-2020 years Cost: USD10 mln. • equipment- USD8.5mln; • construction and installation works -USD1.5mln Objective of the project: Organization of production of new types of import-substituting and export-oriented products, deepening localization of production and reducing imports, and creating new jobs. Expected resultsfrom the implementation of the project, both in kind and in value: 3,500 thousand tons p/a and UZS 26.25 billions.

  6. Investment projects 3. Production of components for industrial cooling towers made of PVC Period : 2020-2021years Cost: USD2mln. • equipment- USD1.8mln; • construction and installation works -USD0.2mln Objective of the project: Cooling towers are used in recirculating water supply systems, where deep stable cooling of water is necessary at high specific hydraulic and thermal loads. They are divided into open, tower and fan. Changing the operating modes of enterprises and increasing the cost of fresh water requires urgent measures to increase the profitability of production, reduce unproductive expenses and reduce production costs. Expected resultsfrom the implementation of the project, both in kind and in value: 1 thousand tons p/a and UZS 7.5 billions.

  7. Investment projects 4. Production of a five-layer 6000 mm width greenhouse film Period : 2022 Cost: USD0.7mln. • equipment- USD0.625mln; • construction and installation works -USD0.075mln Objective of the project:Production of a five-layer polyethylene film with a sleeve size of 6000 mm with an annual design capacity of 1500 tons. based on local raw materials. The main buyers are the greenhouse economy of the region and regions of the Republic of Uzbekistan. In Uzbekistan, this product is widely used by Korean and Turkish manufacturers with a width of 6000 mm to 12,000 mm with a service life of more than 2 years. Expected resultsfrom the implementation of the project, both in kind and in value: 15 thousand tons p/a and UZS 11.25 billions.

  8. Investment projects 5. Production of geo-nets from polymers (PP, PET) Period : 2022 Cost: USD0.4mln. • equipment- USD0.37mln; • construction and installation works -USD0.03mln Objective of the project:Among a variety of new building materials geogrid occupies a special place. It is designed to strengthen roadblocks, steep slopes and embankments. Strengthening and reinforcement is its main function. Geogrid is a flat polymeric or geosynthetic mesh material, supplied in the form of rolls. Depending on the features of the production of road mesh, several of its types are distinguished. The main goal of the project is to meet the needs of road construction. Expected resultsfrom the implementation of the project, both in kind and in value: 3 thousand tons p/a and UZS 2.25 billions.

  9. Investment projects 6. Modernization of the pipe shop with the installation of the tubing line from ø 315 mm to 710 mm Period : 2023 Cost: USD0.5mln. • equipment- USD0.475mln; • construction and installation works -USD0.025mln Objective of the project:It is necessary to modernize the line for the production of polyethylene pipes 315-630 mm in 2008 input. The main buyers are construction contractors using polyethylene pipes of various diameters for water supply, sewage system of the Ministry of Housing and Public Services and the private sector. Expected resultsfrom the implementation of the project, both in kind and in value: 3 thousand tons p/a and UZS 22.5 billions.

  10. Investment projects 7.Production of basalt products (pipes) from basalt fibers Period : 2023 Cost: USD1.5mln. • equipment- USD1.4mln; • construction and installation works -USD0.1mln Objective of the project:Materials made of basalt fiber are chemically resistant to aggressive media, temperature resistant, high strength. The specific strength of basalt fiber is 2.5 times higher than the strength of alloyed steels and 1.5 times the strength of glass fibers. The weight of 1 kilometer of composite reinforcement (Basalt plastic reinforcement) with a diameter of 8 mm is only 65 kg compared to 400 kg of metal fittings. Expected resultsfrom the implementation of the project, both in kind and in value: 5 thousand tons p/a and UZS 3.75 billions.

  11. Investment projects 8.Test-experimental laboratory for the production of various composite materials from polymers Period : 2024 Cost: USD2.5mln. • equipment- USD2.4mln; • construction and installation works -USD0.1mln Objective of the project:The laboratory being created is equipped with the most modern highly automated technological and research equipment with computer control systems, including a specialized pilot production line for the production of melt calibrated jumps, film adhesives and binders that are not inferior to the best world analogues, as well as equipment for thermomechanical, thermogravimetric, dynamic mechanical analysis, differential scanning calorimetry, scanning and translucent electron microscopy, X-ray and IR spectroscopy, gas and liquid chromatography, mass spectroscopy, and rheological and mechanical evaluation.

  12. Investment projects 9. Production of compounds for polymers Period : 2025 Cost: USD1.5mln. • equipment– USD1.4mln; • construction and installation works -USD0.1mln Objective of the project: Organization of production of polymer materials with specified properties, saturation of the domestic market with new types of technological raw materials. A process involving the incorporation of ingredients such as plasticizers, vulcanizing agents, curing agents, stabilizers and other components into the primary polymer is called compounding, and mixtures of polymers with these additives are called compounds. As a rule, modern polymeric materials (composites) are multicomponent systems, depending on the task, the type of additives and the nature of the polymer, the content of additives can vary from a fraction of a percent to 95%. Expected resultsfrom the implementation of the project, both in kind and in value: 1 thousand tons p/a and UZS 7.5 billions.

  13. Investment projects 10. Production of large-sized products by molding Period : 2026 Cost: USD 2mln. • equipment– USD1.9mln; • construction and installation works -USD0.1mln Objective of the project: Plastic molding is the process of forming plastic products using a rigid mold, or a mold. The method of casting of plastics allows creating objects of any shape and size with huge flexibility of design, both simple and very complex in design. This is a very common way of production. In particular, by the method of plastic injection under pressure, car parts, containers, and other products are manufactured. Expected resultsfrom the implementation of the project, both in kind and in value: 1 thousand tons p/a and UZS 7.5 billions.

  14. Investment projects 11. Production of containers from 200 to 2000 liters by rotational molding Period : 2027 Cost: USD 0.6mln. • equipment– USD 0.55mln; • construction and installation works -USD0.05mln Objective of the project: Rotational molding (rotomolding) is one of the five main methods of processing polymers. It is used for production of hollow large plastic products made of polyethylene. Interest in this method is high due to the ability to obtain the largest, most complex and most robust products. Briefly, the process of rotational molding can be described as follows: uniform distribution of molten raw material along the internal surface of the tooling (roto shape) when it rotates in two planes. The method of rotational molding in the production of large plastic products - rotomolding is simple and allows you to achieve the production of high-quality products with a low price and excellent technological properties. Expected resultsfrom the implementation of the project, both in kind and in value: 6 thousand tons p/a and UZS 4.5 billions.

  15. Investment projects 12. Modernization of the repair and mechanical shop. Period : 2027 Cost: USD 0.8mln. • equipment– USD 0.75mln; • construction and installation works -USD0.05mln Objective of the project: modernization of the existing fleet of metalworking machines, purchase of turning, milling and other machines with program numerical control (CNC) for the manufacture of molds, spare parts for the needs of production and services to other consumers, the population.

  16. Investment projects 13. Production of building sheets of polycarbonate Period : 2028 Cost: USD 0.7mln. • equipment– USD 0.65mln; • construction and installation works -USD0.05mln Objective of the project: Cellular polycarbonate is a sheet of cellular structure, made of polymer material. In other words, it is a plastic sheet consisting of two layers joined together by internal stiffening ribs in the form of honeycombs. The material has good heat-insulating, translucent properties, lightweight, shockproof, resistant to corrosion. Expected resultsfrom the implementation of the project, both in kind and in value: 1 thousand tons p/a and UZS 7.5 billions.

  17. Investment projects 14. Organization of production of reinforced pipes from polymers (multilayer). Period : 2028 Cost: USD 0.6mln. • equipment– USD 0.55mln; • construction and installation works -USD0.05mln Objective of the project:Nowadays reinforced polymer pipes are increasingly coming to replace "classical" steel pipes. This type of product, used to transport various types of liquid and gas over long distances under high pressure, has a number of advantages over metallic products. First of all, the reinforced pipes are not susceptible to corrosion and can last about 50 years, as well as polymer reinforced pipes are of low weight, which greatly simplifies the transportation and laying of the mains. Expected resultsfrom the implementation of the project, both in kind and in value: 1 thousand tons p/a and UZS 7.5 billions.

  18. Investment projects 15. Production of detergents Period : 2029 Cost: USD 3.0mln. • equipment– USD 2.9mln; • construction and installation works -USD0.1mln Objective of the project: production of import-substituting products - synthetic detergents and household chemical goods to meet the needs of the population of Uzbekistan. New detergents for special purposes are significantly different in composition and action from their predecessors. This is often a mixture consisting of a large number of different components, the basis of which is a synthetic detergent surfactant. It gives the product a clearing ability and a high biodegradability threshold, even in cool and hard water. All detergents are divided into means for washing laundry, soaking, household and special needs. In addition, they differ in their aggregate state and are available in the form of: liquid gels, powders or granules, pastes. Expected results from the implementation of the project, both in kind and in value: 0.5 thousand tons p/a and UZS 3.75 billions.

  19. Investment projects 16. Production of chemical products for construction purposes (pigments, fillers, concrete and cement additives) Period : 2030-2031 Cost: USD 2.5mln. • equipment– USD 2.4mln; • construction and installation works -USD0.1mln Objective of the project: saturation of the construction materials market with high-quality import-substituting chemical products. Expected results from the implementation of the project, both in kind and in value: 0.5 thousand tons p/a and UZS 3.75 billions.

  20. Growth of production up to 2032. Millions USD

More Related