1 / 12

Metal Casting Processes Chapter 11 Test yourself!

Metal Casting Processes Chapter 11 Test yourself!. Which process is this?!. Uses sand mold held together by vacuum pressure rather than by a chemical binder. Vacuum molding. Which process is this?!. Vacuum molding. Which process is this?!.

carsyn
Download Presentation

Metal Casting Processes Chapter 11 Test yourself!

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Metal Casting ProcessesChapter 11Test yourself!

  2. Which process is this?! Uses sand mold held together by vacuum pressure rather than by a chemical binder Vacuum molding

  3. Which process is this?! Vacuum molding

  4. Which process is this?! A pattern made of wax is coated with a refractory material to make mold, after which wax is melted away prior to pouring molten metal Lost wax process Or Investment casting

  5. Which process is this?! Die casting (Hot chamber)

  6. Which process is this?! mold is made of refractory ceramic material that can withstand higher temperatures than plaster Ceramic mold casting

  7. Which process is this? • Casting process in which the mold is a thin shell of sand held together by thermosetting resin binder. Shell molding Parts made using this process

  8. Which process is this? Uses a mold of sand packed around a polystyrene foam pattern which vaporizes when molten metal is poured into mold EPS (Expanded Polystyrene) process

  9. Which process is this? Molten metal is poured into rotating mold to produce a tubular part True centrifugal casing

  10. Which process is this? • A permanent mold casting process in which molten metal is injected into mold cavity under high pressure Die casting (Cold-chamber)

  11. Which process is this? • Molten metal is not allowed to completely solidify. After the desired wall thickness is obtained, the not yet solidified molten metal is poured out. Pouring of excess resin from mold. Casting Mold and Final Product. Slush casting

  12. Which process is this? • Instead of using gravity to assist in the metal pour and flow in the mold, a low pressure of up to 0.1 MPa (15 psi) gas is applied to the molten metal. Low pressure casting

More Related