1 / 17

Utility of FEM and FEA

Utility of FEM and FEA. Evaluate possible designs without manufacturing a prototype Augment experimental capabilities time money. Heart Disease. 4 million patients in the U.S. are victims of heart failure, and nearly 400,000 new cases are diagnosed each year 2,800 receive heart transplants

Download Presentation

Utility of FEM and FEA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Utility of FEM and FEA • Evaluate possible designs without manufacturing a prototype • Augment experimental capabilities • time • money

  2. Heart Disease • 4 million patients in the U.S. are victims of heart failure, and nearly 400,000 new cases are diagnosed each year • 2,800 receive heart transplants • Heart disease is the leading cause of death and disability in the U.S.

  3. Arrow LionHeartTM • LVAD (Left Ventricular Assist Device) • electric pulsatile blood pump • fully implanted in upper abdomen • 70 cc volume 8 L/min at beat rate of 135 = stroke volume of 60 cc

  4. Introduction Poly(urethaneurea) Blood Sac Pusher- plate Titanium Pump Case

  5. Introduction • Design goal: 2 yrs @50,000,000 cycles/yr = 100,000,000 cycles • FEA used to evaluate various pump designs and their effectiveness at reducing the material stresses

  6. Finite Element Model • Axisymmetric • Pusherplate and pump case treated as rigid • 8-node continuum elements • Blood sac : homogeneous, hyperelastic (non-linear) • Frictionless contact

  7. 0.9 in 2.86 in Finite Element Model

  8. Boundary Conditions • Internal pressure = 100 mm Hg • Rigid pump case was fixed in space • Pusherplate displaced 0.8 inches • 30 increments • simulating ejection stroke of pump

  9. Parametric Study • 3 different thickness sacs (0.015, 0.02, 0.025 inches) • 2 pump case designs (tapered, not tapered) • 2 radii of curvature for sac (3/16 and 7/16 inch) • Total of 12 cases

  10. 3/16 inch of stroke 3/8 inch of stroke end of stroke

  11. 2 3 4 1

  12. Conclusions • Material stresses and strains are sensitive to the thickness of the blood sac • Radius of curvature has little influence on the peak stress in the blood sac, however, it does affect when the peak stress occurs during the stroke cycle

  13. Conclusions • Tapering the pump case can significantly alter blood sac stresses • All stresses and strains were much lower than the yield stress and strain for poly (urethaneurea)

  14. News Release (Feb. 28th, 2001) • First fully implantable heart assist device implanted • As of March 12th, Arrow LionHeartTM recipient is stable and recovering as expected

  15. Total Artificial Heart • Fit into chest cavity • 50 cc • Develop a model to predict and minimize stresses in biomaterials, so that the durability of a reduced-size device is not adversely affected by pump scaling

More Related