10 likes | 13 Views
Designer lights online are the new interior design trend. However, some are more preferable than the others. One such type of lighting is concrete lights in Australia. These designer lights online are sustainable and long lasting. Moreover, you can make them yourself by following the below given steps. <br><br>Cut a soda bottle into two pieces.<br>Drill a hole through the bottle caps of one large sized, previously cut, and one medium sized soda bottle.<br>Pass a tube through the drilled holes in both bottle caps and screw in place. <br>Now screw the lids on top of the respective bottles. The half cut bottle will be on top of the medium sized bottle.<br>Screw through the sides of both bottles to keep the installment in place. <br>Fold the concrete into a mixture and fill the top bottle cavity with this while placing a tin can underneath that covers the width of the open space. <br>After it is dried up, cut the bottles carefully in a way that only the thick concrete layer and tube remains. <br>Smoothen the mold with sandpaper.<br>Cut the socket end of the wire, pass it through hole, strip the wires and twist the copper together and cover this with electrical tape. <br>You can create several concrete lights in Australia through this method. <br><br>Nonetheless, making lights is not everyoneu2019s cup of tea. If you are looking for concrete lights in Australia, By Living is the ultimate destination. Browse our designer lights online at https://www.byliving.com.au/ or call 03 9088 2092.<br>
E N D
How to Make DIY Concrete Lights in Australia? Designer lights online are the new interior design trend. However, some are more preferable than the others. One such type of lighting is concrete lights in Australia. These designer lights online are sustainable and long lasting. Moreover, you can make them yourself by following the below given steps. Cut a soda bottle into two pieces. Drill a hole through the bottle caps of one large sized, previously cut, and one medium sized soda bottle. Pass a tube through the drilled holes in both bottle caps and screw in place. Now screw the lids on top of the respective bottles. The half cut bottle will be on top of the medium sized bottle. Screw through the sides of both bottles to keep the installment in place. Fold the concrete into a mixture and fill the top bottle cavity with this while placing a tin can underneath that covers the width of the open space. After it is dried up, cut the bottles carefully in a way that only the thick concrete layer and tube remains. Smoothen the mold with sandpaper. Cut the socket end of the wire, pass it through-hole, strip the wires and twist the copper together and cover this with electrical tape. You can create several concrete lights in Australia through this method. If Nonetheless, making lights is not everyone’s cup of tea. If you are looking for concrete lights in Australia, By Living is the ultimate destination. Browse our designer lights online at By Living or call (03) 9088 2092. By Living Call : (03) 9088 2092 ww.byliving.com.au info@byliving.com.au