1 / 38

Energy Efficiency in Housing and Small Buildings

Energy Efficiency in Housing and Small Buildings. Progress Report February 18 th 2011. Outline . The Project Policy Advice Current Construction Practice – Baseline Proposed Requirements Scope and Application of Requirements Small Buildings Building Envelope HVAC

brook
Download Presentation

Energy Efficiency in Housing and Small Buildings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Energy Efficiency in Housing and Small Buildings Progress Report February 18th 2011

  2. Outline • The Project • Policy Advice • Current Construction Practice – Baseline • Proposed Requirements • Scope and Application of Requirements • Small Buildings • Building Envelope • HVAC • Service Water Heating • Performance Path • Working Target Validation

  3. Code Committees • CCBFC • Standing Committee on Housing and Small Buildings • Standing Committee on Energy Efficiency in Buildings • Joint Task Group in Housing and Small Buildings • Performance Compliance • Small Buildings • Building Envelope (Housing) • HVAC & Service Water Heating (Housing) • Code Coordination

  4. Partnership between CCBFC and NRCan • NRCan and CCBFC collaborate at all levels • NRCan staff is presented on all sTG and JTG and CCBFC • CCC staff is represented on ERS, R2000 and EnergyStar committees • CCC and NRCan Staff have regular meetings on Energy Efficiency projects • Relationship between Code and ERS • The ERS (and HOT2000) are important tools for code compliance • sTGs develop language to permit HOT2000 for code compliance • Reference specific tools or ratings might be administrative requirements

  5. Project Schedule • October-December 2010 Develop Requirements • January (3rd week) 2011 JTG Meeting (final prescriptive req’s) • January-March 2011 sTGs finalize PCFs andvalidate prescriptive requirements • April 2011 Meeting of the JTG-EEHSB • May 2011 Meeting of SCs (HSB & EEB) • June 2011 Approved PCFs go to pre-public review (EC) • Sep and Oct 2011 Public Review • Nov and Dec 2011 sTGs review all comments on PCFs • January 2012 JTG-EEHSB reviews comments and possible revisions from sTG. • February 2012 SC review of final PCFs • April 2012 CCBFC approves Changes • Summer 2012 Editing & Translation. • Fall 2012Publication

  6. Outline • The Project • Policy Advice • Current Construction Practice – Baseline • Proposed Requirements • Scope and Application of Requirements • Small Buildings • Building Envelope • HVAC • Service Water Heating • Performance Path • Working Target Validation

  7. CCBFC/PTPACC Scope • Joint CCBFC/PTPACC Task Group • Locate requirements in Part 9 (not in MNECH) • Provide prescriptive and performance path • Address at a minimum: Building Envelope and HVAC • Avoid barriers to use of alternative energy sources (“renewables”) • Ensure energy efficiency for housing is forward looking • Provide prescriptive options for small buildings • Develop flexible framework for provinces • Use Current Construction as baseline (study) • Publish interim changes by 2012

  8. CCBFC Policy Advice • CCBFC • Draft Policy Advice discussed – June 2010 • Policy Advice approved by ballot – August 2010 • energy performance levels (working target of ERS 80) • objective-based analysis (objective-based provisions) • compliance path (prescriptive/performance) • energy sources (address energy used by the bldg) (no diff. req’s based on fuel source) • assembly constructions (no exceptions for assemblies) • costs and benefits (cost of constr. & energy saved) • fenestration to wall ratio (set max F/W ratio) • heat recovery (consider heat recovery ventilation) • occupancies (residential & non-residential)

  9. Assembly Construction • CCBFC policy • All assemblies / types of construction are treated equal • MNECH • Had exemption for log homes and manufactured housing • Required to use simple trade-off path • JTG Proposed Approach • Log homes • Use simple trade off or performance path • Energy Performance of log homes needs to be verified • Factory-constructed buildings?

  10. Renewable Energy • CCBFC policy • “use NECB approach” • NECB approach &JTG Recommendation for EEHSB • Provide acceptable solutions where applicable • No barriers – no explicit permission or exemption • Renewable energy can be modeled in performance path (AHJ) • Long Term Plan for EEHSB • Develop quantitative energy target • Possibly address primary energy • Provide credits for renewable on-site energy

  11. Outline • The Project • Policy Advice • Current Construction Practice – Baseline • Proposed Requirements • Scope and Application of Requirements • Small Buildings • Building Envelope • HVAC • Service Water Heating • Performance Path • Working Target Validation

  12. Current Construction Practice • Baseline = Current Construction = 2009 • Development of Baseline • Study by Marshall Leslie (presented last TRC meeting) • Also considered CHBA Pulse Survey and Industry Sales figures • Analyzed Data • weighted for population and housing starts • normalized for more realistic split of EE/non-EE program builder • Baseline will be used for cost & benefit analysis • Single baseline across Canada

  13. Current Construction Practice • Distribution of Responses by Location • Unweighted • Weighted

  14. Current Construction Practice • Distribution Of Label/Non-Label Builders By Location • Unweighted • Weighted

  15. Current Construction Practice • Above-Grade Wall Insulation • all builders • weighted by population • by climate zone

  16. Current Construction Practice • Exterior Wall Insulation R20 Nominal • Wall framing 2x6 framing, 16” on center • Attic Insulation R40 Nominal • Basement Walls Inside at full height with R12 • Floor Slabs Not insulated • Window glazing option Low-e, Argon, double glazed • Window Frame Vinyl • Gas furnace efficiency 90% efficiency furnaces • HRVs installed in 60% of new homes

  17. Outline • The Project • Policy Advice • Current Construction Practice – Baseline • Proposed Requirements • Scope and Application of Requirements • Small Buildings • Building Envelope • HVAC • Service Water Heating • Performance Path • Working Target Validation

  18. Proposed Requirements • 9.36.1 Scope and Application • 9.36.2 Small Buildings • 9.36.3 Building Envelope • 9.36.4 HVAC • 9.36.5 Service Water Heating • 9.36.6 Performance Path

  19. Scope and Application • Application of Requirements • Part 9 requirements apply to Housing and Small Buildings • Non-residential buildings • are permitted to “stay in Part 9” where fenestration-to-wall ratio, HVAC systems, lighting and electrical power loads are “housing-like” • above limits - have to comply with NECB • Scope of Requirements • Part 9 = BE, HVAC, SWH • NECB = BE, HVAC, SWH + Lighting, Electrical

  20. Building Envelope • Prescriptive Requirements • Opaque Assemblies • Code: minimum effective RSI • Appendix: Nominal R/RSI-values • Windows Doors & Skylights • max. U-values • min. ER values (not for skylights) • Minimum Airtightness • 10 prescriptive construction details or Testing (ULC S742, assembly) • Modeling assumption = 2.5 AC/H @ 50Pa • 2 Compliance Options • Insulation levels based on mechanical ventilation (no HRV) • Insulation levels based on HRV

  21. Building Envelope • Above-grade Opaque Assemblies • Numbers shown are nominal/imperial (for illustration purposes only) • Code will show RSI Values • Values are currently being modelled

  22. Building Envelope • Windows, Doors and Skylights • Exemptions • Storm doors exempt • 1 front door and attic/crawl space hatches U = 2.6 W/m²K • Garage door U = 1.1 W/m²K

  23. Building Envelope • Fenestration-to-Wall Ratio • Current Practice: • Average ratio is 18% • 90% of housing below 25% • JTG approach • No maximum limit in prescriptive path • Maximum limit for reference house in performance path

  24. HVAC • HVAC • HRVs • Not required for dwelling units • Where installed, min. thermal effectiveness required • Required for ventilation of interior pools • Require dampers, thermostats, insulated ducts (outside), • minimum equipment efficiencies • Gas Furnaces: 92% (AFUE) • Oil Furnaces: 85% (AFUE) • Standards and performance for other technology will be referenced: • heat pumps, • integrated systems

  25. Service Water Heating • Service Water Heating • minimum equipment efficiencies • electric, gas, oil • tankless/storage tank type • solar water heaters included • pool heaters included • storage tanks and re-circulating pipes need to be insulated • heat traps are required on top of water tanks • pipe insulation (outside/unconditioned space)

  26. Performance Path • Prescriptive • Building envelope • HVAC & SWH

  27. Performance Path • Prescriptive • Building envelope • HVAC & SWH • No trade-off across BE and HVAC

  28. Performance Path • Performance Path • reference house built to prescriptive path (+ assumptions) =X

  29. Performance Path • Performance Path • reference house built to prescriptive path (+ assumptions) • proposed houses will be modeled against reference result =X

  30. Performance Path • Performance Path • reference house built to prescriptive path (+ assumptions) • proposed houses will be modeled against reference result • If proposed house uses equal or less energy = OK =X ≤X

  31. Performance Path • Performance Path • HOT2000 thoroughly considered and probably default method, but need to allow for other calculation methods • Performance path has be enforceable • Input assumptions for calculation tools • State what needs to be reported • Possibly check list for enforcement =X ≤X

  32. Working Target ERS 80 • Validation • use NRCan EnergyStar BOP protocol • model 11 house archetypes for each climate, • average houses per climate zone • average climate zones across Canada • average across Canadashould be equivalent to ERS 80 • Committees consider: • constructability • provincial requirements • cost

  33. Working Target ERS 80 • Validation Assumptions • Ventilation • code minimum ventilation rates, • 8 hours daily (whole year) • no HRV • Fuel • by modeling location • representative of Canadian fuel mix • Operating conditions • 2 adults, 2 children, 50% at the time • 21°C in the main space, 19°C in the basement • 225 l/day hot water use at 55°C • 24 kW plug loads

  34. Working Target ERS 80 • 11 House Archetypes • 1 • 2 • 3 • 4 • 5/6 • 7 • 8 • 9 • 10/11

  35. Working Target ERS 80 • 11 House Archetypes

  36. Working Target ERS 80 • 11 House Archetypes – Calculation of Average For illustration purposes only

  37. Working Target ERS 80 • Building features not addressed in the code,which impact energy used by the building • building size, shape and height • orientation o windows, doors and skyights • fuel used • amount of windows, doors and skylights (fenestration) • ventilation duration, hot water usage • Modeling assumptions will reflect • minimum code requirements or • (code-compliant) range of values in typical construction

  38. Working Target ERS 80 • Modelling assumptions will be set to result inperformance averaging ERS 80

More Related