1 / 49

KX-TES/M824 System

KX-TES/M824 System. New Analog Small PBX. Panasonic Communications Co., Ltd. Network Business Company Edition 2.3. General. 0: Enhancement History 1: System Outline 2: System Connection Diagram 3: System Components 4: System Resources 5: System Block Configuration

brittania
Download Presentation

KX-TES/M824 System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. KX-TES/M824 System New Analog Small PBX • Panasonic Communications Co., Ltd. • Network Business Company • Edition 2.3

  2. General 0: Enhancement History 1: System Outline 2: System Connection Diagram 3: System Components 4: System Resources 5: System Block Configuration 6: General Specifications 7: New Feature 8: Feature Comparison 9: New Proprietary Telephone

  3. Version 1.0 Built-In Voice Message (BV) Fixed Line SMS Terminal Support Caller ID Display on SLT 3-level Automated Attendant (AA) PC-Programming & Maintenance Automatic Configuration for Outside (CO) Line Type Version 2.0 CO Busy Out Budget Management Call Charge Management 0: Enhancement History (1/2) KEY Features Enhancement

  4. 1: System Outline (1/3) ALL in One Package 1) Pre-install (a) DISA with OGM (OGM of a system is 1ch operation and is 180 seconds.) (b) Internal Caller ID (FSK/DTMF 3ch) (c) Remote Modem (V4.2bis 2400bps) 2) Optional (a) Additional DISA Card (DISA of a system is 2ch operation and is a maximum of 360 seconds.) (b) Voice Message (60min * 2ch) (c) 4-Port Door phone / 4-Port Door Opener Card (d) Caller ID Card for CO

  5. 1: System Outline (2/3) • Easy Installation • Hybrid extension (Not all) • 2) Configuration • 3CO x 8Hybrid ( TES824 SYSTEM) • -> 8CO + 16Hybrid + 8 SLT (Max) • 6CO x 16Hybrid ( TEM824 SYSTEM) • -> 8CO + 16Hybrid + 8 SLT (Max) • 3) Centralized Feature Setting for T7710 (PBX mode)

  6. 1: System Outline (3/3) • Easy Maintenance • PC Programming (USB/RS232C) • (PT Programming is also available. ) • 2) Firmware upgrade by PC (USB/RS232C) • 3) Pre-installed Remote Modem (V.42bis:2400BPS)

  7. 2: System Connection Diagram PSTN Remote Maintenance PC CO Trunk New Small PBX KX-TES/TEM824 Door Opener/Door Door Phone Battery T7720/ T7730/ T7750/ T7740 USB1.1 or RS-232 PC Programming T7735 T7710 Voice Mail System BGM/Music on Hold Internal Caller ID SLT Amplifier Paging/Speaker RS-232 SMDR Printer FAX

  8. 3: System Components Model Description Main Unit KX-TES824 3 to 8 Analog CO & 8 to 24 Extensions Main Unit (Basic capacity: 3 Analog CO & 8 Extensions) KX-TEM824 6 to 8 Analog CO & 16 to 24 Extensions Main Unit (Basic capacity: 6 Analog CO & 16 Extensions) Optional Service Cards KX-TE82460 2-Port Door phone / 2-Port Door Opener Card KX-TE82461 4-Port Door phone / 4-Port Door Opener Card KX-TE82474 8-Port Extension(SLT) Card KX-TE82480 2-Port Analog CO & 8-Port Extension(SLT) Card KX-TE82483 3-Port Analog CO & 8-Port Extension(Hybrid) Card KX-TE82491 Message Expansion Card for OGM KX-TE82492 2-Channel Voice Massage Card KX-TE82493 3-Port Analog CO Caller ID Card Proprietary Equipment KX-T30865 Door phone KX-A227 Backup Battery Cable Ver.2

  9. 4: System Resources (1/2) Ver.2 TE82491 Ver.2 TE82491

  10. 4: System Resources (2/2)

  11. 5: System Block Configuration(1/4) KX-TES824 (Preinstall) (Option) Capacity TRUNK : 3CO (RJ11) EXTENTION : 8HYBRID (RJ11) 4 DOORPHONE 4DOOR OPENER card Voice Message card (60min) 2ch DISA OGM : 180sec (1ch) DISA OGM 180sec RMT Modem : 1ch (V.42bis:2400bps) 3CO8EXT(Hybrid)card INTERNAL Caller-ID (FSK/DTMF): 3ch 2CO8EXT(SLT)card USB(1.1)I/F : 1ch 8EXT(SLT) card RS-232C : 1ch (D-SUB) Caller ID card(3CO) x3 Battery back-up (Need optional cable) VOICE MAIL INTEGRATION (APT/DTMF)

  12. 5: System Block Configuration(2/4)

  13. 5: System Block Configuration(3/4) KX-TEM824 (Preinstall) (Option) Capacity TRUNK : 6CO (RJ11) EXTENTION : 16HYBRID (RJ11) 4 DOORPHONE 4DOOR OPENER card Voice Message card (60min) 2ch DISA OGM : 180sec (1ch) DISA OGM 180sec RMT Modem : 1ch (V.42bis:2400bps) INTERNAL Caller-ID (FSK/DTMF): 3ch 2CO8EXT(SLT)card USB(1.1)I/F : 1ch 8EXT(SLT) card RS-232C : 1ch (D-SUB) Caller ID card(3CO) x 3 Battery back-up (Need optional cable) VOICE MAIL INTEGRATION (APT/DTMF)

  14. 5: System Block Configuration(4/4)

  15. 6: General Specifications(1/2)

  16. 6: General Specifications(2/2)

  17. 7: New Feature (1/18) 1) Built-in Voice Message (BV) 2) Fixed Line SMS Terminal Support 3) Caller ID Display on SLT 4) 3-level Automated Attendant (AA) 5) PC Programming & Maintenance a) On-site On-Line System Administration by PC (USB/RS232C) b) Remote On-Line System Administration by PC c) On-Site Off-Line Firmware upgrade by PC (USB/RS232C) 6) Automatic Configuration for Outside (CO) Line Type 7) CO Busy Out 8) Budget Management 9) Call Charge Calculation Ver.1 Ver.2

  18. 7: New Feature (2/18) 1-1) Built-in Voice Message (BV) (for System / For each extension) We have 2 kinds of Voice Message. 1) Common Voice Message - Used for DIL 1:1 Destination to BV, IRNA Destination to BV. - Only Operator can access Common Voice Message. If there is no operator, only manager can access this Voice Message. 2) Personal Voice Message - Used for Call Forward to BV for each extension, Direct message recording from Ext. to BV. - Each extension user can access personal voice message.

  19. 7:New Feature (3/18) 1-2) Built-in Voice Message (BV) (for System / For each extension) Default Setting (Max Record 60min) or (Max 125 Common/Personal OGM’s and Common/Personal Voice Messages) (Max Record 60min) or (Max 125 Personal OGM’s and Personal Voice Messages)

  20. 7:New Feature (4/18) 1-3) Built-in Voice Message (BV) (for System / For each extension) Common OGM Recording : Off-Hook -> Feature Number 722011# -> Confirmation tone. Playing : Off-Hook -> Feature Number 722012# -> Confirmation tone. Removing : Off-Hook -> Feature Number 722010# -> Confirmation tone. Personal OGM Recording : Off-Hook -> Feature Number 7231# -> Confirmation tone. Playing : Off-Hook -> Feature Number 7232# -> Confirmation tone. Removing : Off-Hook -> Feature Number 7230# -> Confirmation tone.

  21. 7:New Feature (5/18) 1-4) Built-in Voice Message (BV) (for System / For each extension) Forwarding Your Calls to Built-in Voice Message

  22. 7:New Feature (6/18) PSTN 2-1) Fixed Line SMS Terminal Support (Short Message Service) SLT Extension which supports SMS feature 3) 1) 2) Short Message Center CID=098-765-4321 • SMS Routing feature Sequence • When Someone sends Short message to SLT extension in KX-TE, Short Message Service Center(SMS center) receives the message. • SMS Center makes a call to KX-TE line. At this time, CO sends CID of SMS center to KX-TE. • KX-TE detects the CO incoming call with CID. If CID is same as pre-assigned SMS Center, KX-TE route the incoming call to pre-assigned SLT extension which supports SMS feature.

  23. 7:New Feature (7/18) 2-2) Call Routing for Fixed Line SMS (Short Message Service) Programming Ex. CO1 => Ext101,102 CO2 => Ext103,104

  24. 7:New Feature (8/18) 3) Caller ID Display on SLT 098-765-4321 Ext101 098-765-4321 098-765-4321 PSTN Ext102 098-765-4321 Ext103

  25. 7:New Feature (9/18) Mark 4-1) 3-level Automated Attendant (AA) Outside Caller wants to talk with Mark, ABC Company, Engineering Group, Software Team. Ext102 ABC Company. Engineering Group Software Team Ext.102 AA Level 1 1stOGM:Company Greeting This is ABC Company. Operator Dial0, Sales dial1, Engineering dial2,---. Dial of Outside Caller 2 AA Level 2 2nd OGM: Engineering Group This is Engineering Group. Software Dial0,Hardware dial1, Mechanical dial2,---. 0 AA Level 3 3rd OGM: Software Team This is Software Team. Mike dial0, John dial1, Bob dial2,---, Mark dial5,---. 5

  26. 7:New Feature (10/18) 1 2 3 4-2) 3-level Automated Attendant (AA) Programming Ex.

  27. 7:New Feature (11/18) 5-1) PC Programming & Maintenance a) On-site On-Line System Administration by PC (USB/RS232C) USB RS232C

  28. 7:New Feature (12/18) 5-2) PC Programming & Maintenance b) Remote On-Line System Administration by PC

  29. 7:New Feature (13/18) 1 3 2 5-3) PC Programming & Maintenance c) On-Site Off-Line Firmware upgrade by PC (USB/RS232C)

  30. 7:New Feature (14/18) 6) Automatic Configuration for Outside (CO) Line Type After System clear, TE824 Main unit activates CO dial type detection. Please Connect CO line First. DTMF Pulse Central Office DTMF Pulse TE starts to detect CO line type(DTMF/Pulse) automatically on the first power up after system clear. You don’t need to select DTMF or Pulse in system programming [401]Dial Mode, but you have to set “C.BLK” if the CO line is Call Blocking type. So please connect CO lines to Main unit first, then execute system clear.

  31. 7:New Feature (15/18) 7) CO Busy Out Ver.2 The PBX can monitor the loop current sent through outside (CO) lines. Ver.1 --- The PBX can not monitor When dialing Loop CO access number, an user may seize a CO port which is not connected CO line Ver.2 --- The PBX can monitor An user does not need to seize a CO port which is not connected CO line <logic> PBX checks loop current pre-programmed time --- [115] “No detection of loop current”  BUSY of CO port status <feature activating> [154] Disable(default) / Enable <activating CO port from CO Busy Out situation> In following cases, Busy-out CO port goes to normal condition. • When PBX find loop current in periodically checking. • When [154] is Disabled • When this CO port receive an incoming call • When an user seize this CO port by CO button

  32. 7:New Feature (16/18) 8) Budget Management Ver.2 Outside (CO) line call can be limited by total call charge for each extension. [925]“Budget Management” (Enable/Disable) --- Extension base [926]“Budget Limit Selection” (Enable/Disable) When current outside (CO) line call exceeded the limit,… Enable (Disconnect the call after the beeps) After beep warning, PBX disconnects this call. Then he can not make more outside (CO) line call. Disable (from the next call) The user can continue this call. But he can not make more outside (CO) line call. * Emergency Call can override this restriction.  [309]“Emergency Number”

  33. 7:New Feature (17/18) 9-1) Call Charge Calculation Ver.2 The PBX can calculate call charge for outside (CO) line calls to preprogrammed destinations. * See detail in Feature Guide “1.20.2 Call Charge Calculation”. This calculation is used for… • Call Charge Display on PT LCD during conversation • Budget Management • Call Charge Management by manager extension

  34. 7:New Feature (18/18) Call Duration – Flat Duration X = Whole number part of * Unit Duration 9-2) Call Charge Calculation The core part of calculation Call Charge = Flat Charge a) call duration < Flat duration  Call Charge = Flat Charge + Unit charge x X b) call duration >= Flat duration 

  35. 8: Feature Comparison(1/13)

  36. 8: Feature Comparison(2 /13)

  37. 8: Feature Comparison(3 /13)

  38. 8: Feature Comparison(4 /13)

  39. 8: Feature Comparison(5 /13)

  40. 8: Feature Comparison(6 /13)

  41. 8: Feature Comparison(7 /13)

  42. 8: Feature Comparison(8 /13)

  43. 8: Feature Comparison(9 /13)

  44. 8: Feature Comparison(10 /13)

  45. 8: Feature Comparison(11 /13)

  46. 8:Feature Comparison(12 /13)

  47. 8: Feature Comparison(13 /13)

  48. 9: New Proprietary Telephone KX-T7735 • 12 CO Buttons • 12 Feature Buttons • 3 Line Backlit LCD • Backlight for LCD • Speakerphone • Headset Jack Note: This model work with TES/M and TDA system.

  49. Thank you very much ! Thank you very much !

More Related