1 / 29

ERT 316: REACTION ENGINEERING CHAPTER 1 MOLE BALANCES

ERT 316: REACTION ENGINEERING CHAPTER 1 MOLE BALANCES. Lecturer: Miss Anis Atikah Ahmad Email: anisatikah@unimap.edu.my Tel: +604-976 3245. OUTLINE. Introduction Chemical Species Chemical Reaction Rate of Reaction General Mole Balance Equation Batch Reactor Continuous-Flow Reactors

Download Presentation

ERT 316: REACTION ENGINEERING CHAPTER 1 MOLE BALANCES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ERT 316: REACTION ENGINEERINGCHAPTER 1MOLE BALANCES Lecturer: Miss Anis Atikah Ahmad Email: anisatikah@unimap.edu.my Tel: +604-976 3245

  2. OUTLINE • Introduction • Chemical Species • Chemical Reaction • Rate of Reaction • General Mole Balance Equation • Batch Reactor • Continuous-Flow Reactors • Industrial Reactors

  3. Introduction • Application of Chemical Reaction Engineering

  4. 1. Chemical species What are chemical species? • Any chemical component or element with a given identity. • Identity of a chemical species is determined by the kind, number, and configuration of that species’ atoms. • Kind of species- methane, butene, butane • Number of atoms- eg: CH4: 1 C, 4 H • Configuration of atoms- arrangement of the atoms

  5. Can they be considered as different SPECIES? Kind: Same (Butene) Number of atoms: Same (C4H8) Configuration: Different arrangement ANSWER: Yes. We consider them as two different species because they have different configurations.

  6. 2. Chemical reaction • Chemical reaction is any reaction when one or more species lost their identity and produce a new form by a change in the kind or number of atoms in the compound, and/or by a change in structure or configuration of these atoms. HOW????

  7. 2. Chemical reaction • Species may lose its chemical identity by: 1) Decomposition (by breaking down the molecule into smaller molecule) Eg: C ⇌ A + B 2) Combination (reverse of decomposition) 3) Isomerization ( neither add other molecule nor breaks into smaller molecule)

  8. It tells how fast a number of moles of one chemical species to form anotherchemical species. 3. Rate of Reaction, ,the rate of reaction: is the number of moles of A reacting (disappearing) per unit time per unit volume ( ). , is the rate of formation (generation) of species A. , is a heterogeneous reaction rate: the no of moles of A reacting per unit time per unit mass of catalyst ( catalyst)

  9. 4. The General Mole Balance Equation • A mole balance of species j at any instant time: Rate of accumulation of j within the system (moles/time) Rate of generation of j by chemical reaction within the system (moles/time) Rate of flow of j into the system (moles/time) Rate of flow of j out of the system (moles/time) In - Out + Generation = Accumulation Fj0 - Fj + Gj = Fj0 - Fj + =

  10. 4. The General Mole Balance Equation Consider a system volume : System volume Fj0 Gj Fj General mole balance: Fj0 - Fj + Gj = dNj/dt In - Out + Generation = Accumulation

  11. The General Mole Balance Equation Condition 1: • If all the the system variables (eg: T, C) are spatially uniform throughout a system volume: Gj = rj.V

  12. The General Mole Balance Equation Condition 2: • If the rate of formation, rjof a species j for the reaction varies with position in the system volume: • The rate of generation ∆Gj1: ∆Gj1=rj1∆V1 ∆V1 rj1 rj2 ∆V2 Fj0 Fj

  13. 4. The General Mole Balance Equation • The total rate of generation within the system volume is the sum of all rates of generation in each of the subvolumes. • Taking the limit M∞, and ∆V0 and integrating,

  14. TYPE OF REACTORS in out Batch REACTORS Continuous Flow

  15. 5. Batch Reactors • The reactants are first placed inside the reactor and then allowed to react over time. • Closed system: no material enters or leaves the reactor during the time the reaction takes place. • Operate under unsteady state condition. • Advantage: high conversion the conditions inside the reactor (eg: concentration, temperature) changes over time

  16. 5. Batch Reactors: Derivation • Batch reactor has neither inflow nor outflow of reactants or products while the reaction is carried out: FA0 = FA = 0 • General Mole Balance on System Volume V FA0 - FA+ =

  17. 5. Batch Reactors: Derivation • Assumption: Well mixed so that no variation in the rate of reaction throughout the reactor volume: • Rearranging; • Integrating with limit at t=0, NA=NA0 & at t=t1, NA=NA1,

  18. 6. Continuous-Flow Reactors: steady state 1. Continuous-Stirred Tank Reactor (Backmix/ vat) • open system: material is free to enter or exit the reactor • reactants are fed continuously into the reactor. • products are removed continuously. • operate under steady state condition • perfectly mixed: have identical properties (T, C) everywhere within the vessel. • used for liquid phase reaction

  19. 6.1 Continuous-Stirred Tank Reactor DERIVATION • General Mole Balance: • Assumption: 1.steady state: 2. well mixed: • Mole balance: FA - FA + = 0 FA0 - FA+ = design equation for CSTR

  20. 6. Continuous-Flow Reactors: steady state 2. Plug Flow/Tubular Reactor • Consist of cylindrical hollow pipe. • Reactants are continuously consumed as they flow down the length of the reactor. • Operate under steady state cond. • No radial variation in velocity, conc, temp, reaction rate. • Usually used for gas phase reaction

  21. 6.2 Plug Flow Reactor DERIVATION • General Mole Balance: • Assumption: 1.steady state: • Differentiate with respect to V: FA0 - FA+ = FA0 - FA+ = 0

  22. 6.2 Plug Flow Reactor DERIVATION • Rearranging and integrating between   V = 0, FA = FA0   V = V1, FA = FA1

  23. 6. Continuous-Flow Reactors: steady state 3. Packed-Bed Reactor (fixed bed reactor) • Often used for catalytic process • Heterogeneous reaction system (fluid-solid) • Reaction takes place on the surface of the catalyst. • No radial variation in velocity, conc, temp, reaction rate

  24. 6.3 Packed Bed Reactor DERIVATION • General Mole Balance: • Assumption: 1.steady state: • Differentiate with respect to W: the reaction rate is based on mass of solid catalyst, W, rather than reactor volume FA0 - FA+ = FA0 - FA+ = 0

  25. 6.2 Packed Bed Reactor DERIVATION • Rearranging and integrating betweenW = 0, FA = FA0   W = W1, FA = FA1

  26. Summary of Reactor Mole Balance

  27. Industrial Reactors Packed-Bed Reactor at Sasol Limited Chemical

  28. Industrial Reactors Fixed-Bed Reactor at British Petroleum (BP): using a colbalt-molybednum catalyst to convert SO2 to H2S

  29. Industrial Reactors Fluidized Catalytic Cracker at British Petroleum (BP): using H2SO4 as a catalyst to bond butanes and iso-butanes to make high octane gas

More Related