1 / 19

Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade

Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade. DESY MKS-2. Hardware. Hardware Upgrade Overview Was ist Kompatibel? Version 5 to 10.2 Micro Chassis I/O Families Kabel. Ausführung. Was muß geändert werden ? Version 5 to Version 10.2 – All PCMs Micro Chassis.

brandy
Download Presentation

Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade DESY MKS-2

  2. Hardware • Hardware Upgrade Overview • Was ist Kompatibel? • Version 5 to 10.2 • Micro Chassis • I/O Families • Kabel

  3. Ausführung • Was muß geändert werden ? • Version 5 to Version 10.2 – All PCMs • Micro Chassis

  4. Voraussetzungen • What are the PC Requirements? • Version 10 and up • Operating System • Software • What Networking Changes are Required? • Version 9 and Version 10 to 11 • For the PCM • For the PC

  5. Was ist Kompatiebel? ? PVN ? ? PCMIII ? PVX PCMII DCM ? ? ? • Version 5 to Version 10.2 • T386/486, and Pentium 586 CPU boards • Ethernet link 0 and link 1 Cards • UTB - Utility Board - No Change • PSA - Process Select Assembly - No Change • RLink Token Ring Card is NOT supported with V10 PCMI PCM2000 CDCM ? OCM ?

  6. P810 J890 BXXX BXXX BXXX BXXX Modicon Modicon Modicon Modicon Modicon Modicon PCM 4100 PCM 2000 Was ist Kompatiebel? • All previously supported I/O families are still supported • 16000 • GPXIO • Siemens 505 Remote • Modicon Remote • Modicon Quantum • Quantum High Density • Modbus + • A-B Data Highway + Operator Workstation Windows NT Display Node Multi-Monitor Console CDCM Redundant TCP/IP Ethernet Communications PCM 2000 Modicon PLC Modbus + AB I/O Siemens I/O Data Highway+ S908 PLC 5/40

  7. PCM 4100 PCM H1 CDCM Was ist Kompatiebel? • I/O Family Additions • Version 10.1 • Redundant Profibus • Multiple 505 I/O Redundancy Schemes • Version 10.2 • Redundant /Non Redundant ControlNetTM • Foundation Fieldbus Connectivity • Through • OPC • Modbus • Controlnet Redundant TCP/IP Ethernet Communications D/3 Hybrid Process Controllers 1771 I/O PLC 5/40

  8. Was muß geändert werden ? • Version 5 to Version 10.2 I/O Families • PIO Multibus 16000 I/O Board No Change • Intel 544 Multibus GPXIO Board No Change • Intel 86/35 GPXIO Board No Change

  9. Was ist Kompatiebel? • Version 5 to Version 10.2 - I/O Families • SST Multibus Modbus+ Board NoChange • SST Multibus Data Highway+ Board NoChange • SST Multibus Profibus Board NoChange • SST Multibus ControlNet Board NoChange • Rockwell Multibus ControlNet Board NoChange

  10. Was ist Kompatiebel? • Version 5 to Version 10.2 - I/O Families • NEW ISA PIO Card • NEW PCI MRIOC Card • NEW PCI Modbus Plus Card • NEW PCI Data Highway Plus Card • NEW PCI Profibus Card • NEW PCI ControlNet Card

  11. Was muß geändert werden ? • Micro Chassis CPU - Version 5 zu Version 10.2 • 386/486 CPU cards require upgrade of SBoot PROM • Patapsco, Interlan or IDEA Ethernet Cards used for Link0 and Link1 • IDEA card recommended for RLINK (3 Jumper settings) • 40 - Link E0 • 60 - Link E1 • 50 - R-Link • Crossover Cable used for RLink PROMs

  12. Was muß geändert werden ? • Micro Chassis CPU - Version 5.0 to Version 10.2 • Replace 4 Boards with 1 • The 586 Pentium CPU and MFDC (Multi Function Daughter Card) • PROM upgrade required • Included on the MFDC are • 3 Independent Ethernet ports for: • R-Link • E1 • E0 • One 3-port parallel connector • To connect to a PCMI/PCMII UTB RLink E1 E0

  13. Was muß geändert werden ? • MRIOC Board - Version 5 zu Version 10.2 • Prom Upgrade • Standard I/O Modules V5 - V10.2 • Hi Density I/O Modules V10.1 - V10.2 PROM

  14. Was muß geändert werden ? • Micro Chassis - Version 5.0 to Version 10.2 • New 4 Slot PICMG Backplane Holds: • 886 ROBO-678-GSE PICMG CPU • On-board Ethernet Link 0, Link 1 and R-Link • Up to 3 of the 6 I/O Controller Boards • New IUA (Intelligent Utility Assembly) • SSB (Status Supervisory Board) • SMB (Status Monitor Board) • New MSA (Micro Select Assembly)

  15. Was sind die PC Voraussetzungen? • CDCM Minimum Requirements • Operating System • 600MHZ Pentium • 256 MB RAM • 8+ MB Video RAM • TotalVision™, InstAlarm™, & Trending • 20 GB Hard Disk • Software • Windows 2000 Server with Client Access Licenses • Internet Explorer 5.0 • Optional Office 2000 for MDL Excel

  16. Was sind die PC Voraussetzungen ? • DCM Minimum Requirements V10+ • Operating System • 450MHZ Pentium • 256 MB RAM • 8+ MB Video RAM • 9 GB Hard Disk • Software V10+ • Windows 2000 Server with Client Access Licenses

  17. Was sind die PC Voraussetzungen? • OCM Minimum Requirements V10+ • Operating System • 400MHZ Pentium • 128 MB RAM • 8 MB Video RAM • 4 GB Hard Disk • Software V10+ • Windows 2000 Professional

  18. Welche Netzwerkänderungen sind notwendig • For the PCM V5 to V 10.2 • Along with the E-net Card MAC Address, each PCM now has a TCP/IP Address • D/3 should be on a separate network • DHCP or Server assigned IP addresses NOT supported. Addresses must be loaded at DCM node and in WinCOD • Should be connected to other facility networks through routers • DCMs and OCMs communicate at 100Mbps • PCM has optional 100Mbps Full Duplex communication • Loaded to the PCM automatically • When the PCM and CDCM are both booted the CDCM establishes PCM communication through the MAC Address and transmits the Ethernet address to the PCM. • Each Mac address (E0 & E1) will need a TCP/IP address • E0 & E1 TCP/IP addresses must be on different subnets

  19. Welche Netzwerkänderungen sind notwendig • For the PC 10.2 • Determine number and names of Nodes (C/DCMs) • Setup Nodes in WinCOD • Network address for the PC (Network Neighborhood) and that node in WinCOD must match. • Node License • Loaded on a specific Node • Linked to a MAC address or Sentinel • Floating License • Loaded on License Server • Served to users on 1st come 1st served basis

More Related