1 / 16

LDEQ’s RECAP

This document provides guidelines for determining soil concentrations protective of groundwater use (SoilGW) and maximum allowable soil concentrations (SoilSat) for constituents of concern. It includes step-by-step procedures for determining SoilGW for organic and inorganic contaminants, as well as the use of the Synthetic Precipitate Leaching Procedure (SPLP) for evaluation.

bjoanne
Download Presentation

LDEQ’s RECAP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LDEQ’s RECAP Soil Protective of Groundwater - SoilGW Soil Saturation - Soilsat

  2. SOILGW & SOILSAT • SoilGW values are soil concentrations for constituents of concern that are protective of a groundwater use • Soilsat values are the maximum soil concentrations allowed for constituents of concern. Above Soilsat free product is assumed to exist.

  3. MO-1: Determination of SoilGW for Organic COC • 1. Identify the appropriate GW classification • ex. Shallow groundwater - GW3NDW • Determine the GW value for the COC • ex. COC is Benzene, GW3NDW = 0.013 mg/l < Watersol • 2. Use GW value to calculate Csoil • ex.Csoil = 0.00668 =

  4. MO-1: SoilGW Organic COC cont. • 3. Multiply Csoil by vertical DF of 20 • ex. SoilGW = 0.00668 * 20 = 0.13 • 4. Multiply SoilGW by DF from Table in Appendix I • ex. From Table x = 300 & Sd = 10 then DF = 15 • SoilGW3 = 0.13 * 15 = 1.95

  5. MO-1: SoilGW Organic COC cont. • 5. If the SoilGW3 value from Step 4 is lower than the next more protective groundwater classification SoilGW value then use the more protective groundwater classification SoilGW value • ex. SoilGW3 = 1.95 SoilGW2 = 0.051 • SoilGW3 > SoilGW2 • Therefore, use SoilGW3 as the SoilGW value

  6. MO-1: Determination of Soilsat • Soilsat = 900 = • Soilsat is not applicable to constituents that are in the solid phase at ambient temperatures (i.e., constituents having melting points less than or equal to 20o C)

  7. MO-1: Determination of SoilGW for Inorganic COC • If TCLP level available: SoilGW = TCLP level * 20 • If TCLP level not available: SoilGW = GW1 * 100 * 20

  8. MO-2: Determination of SoilGW Method 1-Organic COC: • 1. Identify the appropriate GW classification ex. Shallow groundwater - GW3NDW • Determine the GW value for the COC • ex. COC is Benzene, GW3NDW = 0.013 mg/l < Watersol • 2. Use GW value to calculate Csoil • ex.Csoil = 0.00668 =

  9. MO-2: SoilGW Method 1-Organic COC cont. • 3. Multiply Csoil by site-specific DF • SoilGW3 = 0.00668*DAFSummers*DAFDomenico • 4. If the SoilGW3 value from Step 3 is lower than the next more protective groundwater classification SoilGW value then use the more protective groundwater classification SoilGW value • SoilGW3 = 0.00668*DAFSummers*DAFDomenico > or < SoilGW2 • If SoilGW3 > SoilGW2 use SoilGW3 • If SoilGW3 < SoilGW2 use SoilGW2

  10. MO-2: Determination of SoilGW Method 1-Inorganic COC • If TCLP level available: SoilGW = TCLP level * 20 • If TCLP level not available: SoilGW = GW1 * 100 * 20

  11. MO-2 Determination of SoilGW Method 2-Organic and Inorganic COC • This method may be used when the following conditions are met: • Groundwater and soil data are available, • Groundwater concentrations are less than soil concentrations, and • Groundwater data indicate the RS GW value has been exceeded

  12. MO-2: SoilGW Method 2-Organic and Inorganic COC cont. • 1. Calculate site specific water/soil partition coefficient to determine SoilGW • SoilGW = (SoilSS / GWSS) * GW1,2 or 3 • GWSS & SoilSS - site-specific values (see footnotes on sample requirements p. I-49) • GW1,2 or 3 - refer to Table • 2. Multiply SoilGW by appropriate site-specific DF

  13. MO-2: Determination of SoilGWMethod 3-Organic and Inorganic COC Synthetic Precipitate Leaching Procedure (SPLP) - Used to evaluate Soil Protective of GW - SW-846 Method 1312 - SPLPConcentration < (GW RS)(20)(DAF) then SoilGW is not an issue

  14. MO-2: Determination of SoilGW Method 3-Organic and Inorganic COC How is the SPLP data used to evaluate the soil to gw pathway? • SoilGW1: Compare SPLP to GW1 x DFSummers • SoilGW2: Compare SPLP to GW2 x DFSummers x DF2 • SoilGW3: Compare SPLP to GW3 x DFSummers x DF3

  15. MO-2: Determination of SoilGW Method 3-Organic and Inorganic COC cont’d. • If SPLP <, then screen out soil to gw pathway • If SPLP >, then delineate area of concern • SPLP vs TCLP • SPLP vs LRS

More Related