1 / 14

SINGLE NODE-PAIR CIRCUITS

IN PRACTICE NODES MAY ASSUME STRANGE FORMS. THIS ELEMENT IS INACTVE (SHORT-CIRCUITED). LOW DISTORTION POWER AMPLIFIER. SINGLE NODE-PAIR CIRCUITS. THESE CIRCUITS ARE CHARACTERIZED BY ALL THE ELMENTS HAVING THE SAME VOLTAGE ACROSS THEM - THEY ARE IN PARALLEL.

bgentry
Download Presentation

SINGLE NODE-PAIR CIRCUITS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IN PRACTICE NODES MAY ASSUME STRANGE FORMS THIS ELEMENT IS INACTVE (SHORT-CIRCUITED) LOW DISTORTION POWER AMPLIFIER SINGLE NODE-PAIR CIRCUITS THESE CIRCUITS ARE CHARACTERIZED BY ALL THE ELMENTS HAVING THE SAME VOLTAGE ACROSS THEM - THEY ARE IN PARALLEL

  2. LOW VOLTAGE POWER SUPPLY FOR CRT - PARTIAL VIEW SAMPLE PHYSICAL NODES COMPONENT SIDE CONNECTION SIDE

  3. THE CURRENT DIVISION APPLY KCL USE OHM’S LAW TO REPLACE CURRENTS DEFINE “PARALLEL RESISTANCE COMBINATION” BASIC CURRENT DIVIDER THE CURRENT i(t) ENTERS THE NODE AND SPLITS - IT IS DIVIDED BETWEEN THE CURRENTS i1(t) AND i2(t)

  4. WHEN IN DOUBT… REDRAW THE CIRCUIT TO HIGHLIGHT ELECTRICAL CONNECTIONS!! IS EASIER TO SEE THE DIVIDER

  5. POWER PER SPEAKER LEARNING EXTENSION - CURRENT DIVIDER CAR STEREO AND CIRCUIT MODEL THERE IS MORE THAN ONE OPTION TO COMPUTE I2

  6. APPLY KCL TO THIS NODE DEFINE “PARALLEL RESISTANCE COMBINATION” FIRST GENERALIZATION: MULTIPLE SOURCES

  7. APPLY KCL TO THIS NODE Ohm’s Law at every resistor General current divider SECOND GENERALIZATION: MULTIPLE RESISTORS

  8. Notice use of passive sign convention Once v(t) is known all other variables can be determined; e.g.,

  9. 20k||5k General current divider

  10. FIND THE CURRENT NOTICE THE MINUS SIGN COMBINE RESISTORS COMBINE THE SOURCES STRATEGY: CONVERT THE PROBLEM INTO A BASIC CURRENT DIVIDER BY COMBINING SOURCES AND RESISTORS. THE NEXT SECTION EXPLORES IN MORE DETAIL THE IDEA OF COMBINING RESISTORS

  11. I2 I1 9mA I1 I1 I2 I2 DIFFERENT LOOKS FOR THE SAME ELECTRIC CIRCUIT

  12. I1 I2 I1 REDRAWING A CIRCUIT MAY, SOMETIMES, HELP TO VISUALIZE BETTER THE ELECTRICAL CONNECTIONS I2

  13. Determine power delivered by source + V _

More Related