slide1
Download
Skip this Video
Download Presentation
Video card

Loading in 2 Seconds...

play fullscreen
1 / 6

ComputerDisassembly - PowerPoint PPT Presentation


  • 323 Views
  • Uploaded on

Video card Ethernet USB From back of computer, remove screws holding right side of case Take off case wall by pulling back, then away from case Remove accessory cards Take out screws for video, ethernet and USB cards Pull cards out of slots Remove power cables Pry up tab on side

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'ComputerDisassembly' - bernad


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
slide1

Video card

Ethernet

USB

From back of computer, remove screws holding right side of case

Take off case wall by pulling back, then away from case

  • Remove accessory cards
  • Take out screws for video, ethernet and USB cards
  • Pull cards out of slots
slide2

Remove power cables

  • Pry up tab on side
  • Pull straight up on ends
  • Remove floppy disk cables
  • Pull up on both ends of black
  • connector
slide3

Take out all 9 screws holding motherboard in case

Lift out motherboard

  • Remove memory board
  • Push down on both white
  • tabs simultaneously, and the
  • board will pop out
slide4

Remove 4 screws from CPU

cooling fan

Remove fan

  • Remove silver cooling fins
  • Push down on latch and pry out
  • Pull off fins
slide5

Pull off cooling fins

(may require some force to break

the glue)

Pull up silver bar (break sticker if necessary)

Lift out CPU chip

slide6

Remove battery

  • Push silver latch, battery will pop out
  • Measure voltage of battery
  • Reassemble computer:
  • Replace battery
  • Insert CPU, lower bar
  • Put cooling fins on CPU,
  • reattach latch
  • - Replace cooling fan and screws
  • Insert memory board
  • Place motherboard in case,
  • attach with all 9 screws
  • Attach power and floppy drive cables
  • Insert video, ethernet, USB cards
ad