1 / 24

Cat-5e/Cat-6 Ethernet Wiring Straight-through Cross-over Console (roll-over)

Cat-5e/Cat-6 Ethernet Wiring Straight-through Cross-over Console (roll-over). PHYSICAL. Cabling. Straight Through Unlike Devices Router to switch, PC to switch Cross-Over Like devices Router to router, PC to PC, switch to switch, router to PC Console (Rollover) Console port

bedros
Download Presentation

Cat-5e/Cat-6 Ethernet Wiring Straight-through Cross-over Console (roll-over)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cat-5e/Cat-6 Ethernet Wiring Straight-through Cross-over Console (roll-over) PHYSICAL

  2. Cabling • Straight Through • Unlike Devices • Router to switch, PC to switch • Cross-Over • Like devices • Router to router, PC to PC, switch to switch, router to PC • Console (Rollover) • Console port • PC serial port to DB-9 adapter to console port

  3. Straight-Through

  4. Cross-Over

  5. Physical Switch Components • CPU • RAM • Running configs • NVRAM • Startup configs • Flash • Cisco Internetworking Operating System (IOS) • VLAN database • ROM • If the IOS fails to load, an VERY basic OS is loaded from ROM • Console • Console port for initial configuration • Interfaces • Switch ports, may include 10/100/1000 ethernet, and/or fiber uplink ports.

  6. DATA LINK • CSMA/CD • MAC Addresses • Collision Domains

  7. CSMA/CD • CSMA/CD is a modification of pure Carrier Sense Multiple Access (CSMA) • Collision detection is used to improve CSMA performance by terminating transmission as soon as a collision is detected • Reduces the probability of a second collision on retry • CSMA/CD is no longer used • Switches break up collision domains

  8. MAC Addresses Manufacturer Portion NIC Portion • Globally unique identifier burned into the Network Interface Card (NIC) • Address Format: 01-23-45-67-89-AB • 248 or 281,474,976,710,656 possible MAC addresses. • MAC Address technology is a sub-layer of the Data Link layer in the OSI model

  9. Switches VS Hubs • Switches replace hubs • Hubs are dumb devices • Switches are smart • Hubs broadcast everything out all ports but port of origin • Switches only broadcast if MAC address not in CAM table • Content Addressable Memory (CAM) table maps MAC addresses to ports. • MAC entries purged after a certain amount of inactivity.

  10. Port Security • Allows only a certain number of MAC addresses per port • Shuts down port when unauthorized MAC address detected • Can be an administrative nightmare if configured incorrectly

  11. No Redundancy

  12. No Redundancy

  13. Spanning-Tree Protocol (STP) • Switches with redundant links • Without STP • Broadcast storms and bridging loops • With STP • Only one redundant link active • If active link goes down, redundant link comes up

  14. STP States • Blocking • No data sent or received • Only BPDUs received • Listening • Switch processes Bridge Protocol Data Units (BPDUs) • Learning • Doesn’t forward frames • Learns MAC addresses • Forwarding • Sends and receives data • Monitors BPDUs in case directed to return to blocking state • Disabled • Administratively disabled ports

  15. STP Elections • Bridge ID • [Bridge Priority: 0-65535; defaults to 32768] [MAC Address] • Root Bridge • Root of the switching network • Decides which links to use and which to shut down • Elections • Bridge Priority checked first (lower number = higher priority) • If priorities the same, then checks MAC address

  16. Redundancy with STP

  17. Redundancy with STP

  18. Redundancy with STP

  19. Redundancy with STP

  20. VLANs • Logically (rather than physically) isolates ports that belong to different VLANs • Logically associates ports on the same VLAN on different switches with each other • Requires encapsulation and frame tagging for inter-VLAN communication • Encapsulation Protocols: • ISL: • Legacy Cisco proprietary protocol • Encapsulates all frames • 802.1Q: • Tags frames from VLANs other than the native VLAN • Developed by the IEEE • Default encapsulation method on most switches

  21. Inter-VLAN Communication • Requires a router • Sub-Interfaces • One logical interface for each VLAN

  22. VLAN Trunking Protocol (VTP) • Cisco proprietary trunking protocol • Modes • Server • Can add, remove, and modify VLANs • Passes VLAN information on to VTP Client • Client • Forwards VLAN information on to other VTP Clients • VLAN information stored in RAM • Transparent • Does not participate in VTP

  23. Network • Routers break up broadcast domains • Switches do not route layer three addresses

More Related