1 / 2

Equal-Channel Angular Pressing (ECAP) ECAP is used to process ultrafine-grained microstructures.

Pure Al: 1 pass. Al-6061: 1 pass. Processing and Properties of Materials with Ultrafine Grain Sizes Terence G. Langdon, University of Southern California NSF Award DMR-0243331. Equal-Channel Angular Pressing (ECAP) ECAP is used to process ultrafine-grained microstructures.

bayle
Download Presentation

Equal-Channel Angular Pressing (ECAP) ECAP is used to process ultrafine-grained microstructures.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pure Al: 1 pass Al-6061: 1 pass Processing and Propertiesof Materials with Ultrafine Grain SizesTerence G. Langdon, University of Southern CaliforniaNSF Award DMR-0243331 Equal-Channel Angular Pressing (ECAP) • ECAP is used to process ultrafine-grained microstructures. • Grain sizes are generally in the range 100-1000 nm. • Hardness measurements show homogeneity is achieved more easily in pure aluminum than in an Al-6061 alloy: illustrations (right) show hardness contour maps after 1 pass of ECAP. • Materials processed by ECAP exhibit high strength at ambient temperature. C. Xu, M. Furukawa, Z. Horita and T.G. Langdon, “Using ECAP to Achieve Grain Refinement, Precipitate Fragmentation and High Strain Rate Superplasticity in a Spray-Cast Aluminum Alloy,” Acta Materialia51, 6139-6148 (2003). C. Xu, M. Furukawa, Z. Horita and T.G. Langdon, “Severe Plastic Deformation as a Processing Tool for Developing Superplastic Metals,” Journal of Alloys and Compounds378, 27-34 (2004).

  2. Processing and Propertiesof Materials with Ultrafine Grain SizesTerence G. Langdon, University of Southern CaliforniaNSF Award DMR-0243331 Training • 2 graduate students, 1 post-doc and 2 senior visitors are participating in this research. • A collaboration is in place with Kyushu University, Japan. Dr. Cheng Xu (third from right) and graduate student Megumi Kawasaki (second from right) together with other TMS awardees at Charlotte, N.C. (2004). Impact • Invited lectures describing the results were presented at international conferences in the Czech Republic, Japan, Poland, Spain, U.K., U.S.A. • The P.I. is co-organizer of conferences on Ultrafine-Grained Materials in Spain (2003), Charlotte, N.C. (2004), Ukraine (2004), China (2004), Japan (2005), Canada (2006). • The post-doc and graduate student won awards for best oral presentation and best poster at the TMS Annual Meeting, Charlotte, N.C. (2004). Prof. Langdon, Prof. Furui, Megumi Kawasaki, Dr. Cheng Xu, Praveen Kumar and Dr. Karodi Venkateswarlu at the University of Southern California.

More Related