kx tda200 100 system ver 1 0
Download
Skip this Video
Download Presentation
KX-TDA200/100 System (Ver.1.0)

Loading in 2 Seconds...

play fullscreen
1 / 24

KX-TDA200 - PowerPoint PPT Presentation


  • 150 Views
  • Uploaded on

KX-TDA200/100 System (Ver.1.0). Panasonic Communications Co., Ltd. Network Business Company Edition 1.3. Chapter 5 Programming. Chapter 5 Programming. 1. Initial/On-site Programming 3/24

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'KX-TDA200' - ballard


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
kx tda200 100 system ver 1 0

KX-TDA200/100 System(Ver.1.0)

Panasonic Communications Co., Ltd.

Network Business Company

Edition 1.3

Chapter 5

Programming

slide2

Chapter 5

Programming

1. Initial/On-site Programming 3/24

2. Remote Programming 7/24

3. System Update 10/24

slide3

Initial/On-site Programming (1/4)

DPT(with LCD)

KX-TDA system can be programmed by two devices.

(1) Any DPT(with LCD display).

(2) PC-Program.

(NOTE!) Remote programming can not be used for the initial programming.

PC-Program

slide4

Initial/On-site Programming (2/4)

PC-Program (1/2)

USB (DPT)

USB (System)

We can not use the following interface for the initial programming of the system.

(1) LAN.

(2) Modem & SLT port (RMT card).

(3) ISDN & ISDN-Extension port. (LAP-B)

RS-232C (System)

The system data is saved to SD card with the following cases.

(1)When the system initial start up finished.

(2)When you disconnect the PC programming.

(3)Every hour.

(4)Click ICON(SD memory backup) manually.

slide5

Initial/On-site Programming (3/4)

PC-Program (2/2)

PC-Program has the Quick Setup feature for the initial programming(just after clearing the system).

By programming the following simple and limited items, you can start the system quickly.

Item

Parameter

Item

Parameter

1. Pattern-1(with *)

2. Pattern-2(without *)

Date

Flexible

Numbering

Type

Year / Month / Date

Time

Hour / Minute

System

Password

4-10 Digits.

Operator /

Local access

1. 0 / 9 (US Style)

2. 9 / 0 (UK Style)

You can change only the password of your entry level.

You can skip this process, if you okay with the default password.

( Administrator

or User )

Select & upload the file

for multi-Language data

area(5) in SD card.

Language

Data Upload

Extension

Numbering

1. Automatic

2. Manual

Operator &

Manager

(Automatic Extension Numbering mode only)

LCD

Language

Select the LCD display

language data from 5.

slide6

Initial/On-site Programming (4/4)

PT Program (1/1)

DPT(with LCD)

All the DPT can be the initial programming terminal after the system data clearing.

You can program the system from any extension(PT) port.

[PROG] * # 1234

System Program mode

Default password

slide7

Remote Programming (1/3)

Analog Modem Interface

Option !

RMT Card

KX-TDA0196

Any Trunk card

DISA

Transfer

DIL

Telephone Network

Any Trunk

Analog Modem

PC-Program

MPR Card

slide8

Remote Programming (2/3)

ISDN LAP-B Interface

Only the single channel(64kbps) communication is supported.

No Option !

ISDN-BRI

ISDN

Telephone Network

Built-in TA function of ISDN-BRI card makes digital link to the ISDN modem by LAP-B protocol.

ISDN

ISDN-BRI/PRI Card

ISDN Modem

PC-Program

slide9

Remote Programming (3/3)

If you want to access from Internet(WAN) side, you must consider the setting of FireWall.

LAN Interface

Ethernet

10Base-T

LAN

(IP Network)

Ethernet

10Base-T

TCP/IP

Port 35300

(35300 - 39999 is reserved.)

LAN Card

PC-Program

slide10

KX-TDA

System Update (1/14)

MPR Software Update(1)

MPR card

SD card

New program

files

PC-Program

New program files of MPR can be uploaded by PC-Program.

The uploaded data is stored in SD card on MPR card.

(You do not need to use EPROM Programmer ! )

slide11

KX-TDA

System Update (2/14)

MPR Software Update(2)

MPR card

New SD card

Old SD card

Remove !

Insert !

Old data

New data

New program files of MPR can also be installed by simply changing the SD card physically.

slide12

KX-TDA

System Update (3/14)

LPR Software Update

LPR cards

SD card

New data

New program

files

PC-Program

Flash-ROM

on each card.

New program files ofeach free-slot / option-slot card can be uploaded by PC-Program.

The uploaded data is once stored in SD card on MPR card.

Then downloaded to the Flash-ROM on the LPR.

(You do not need to use EPROM Programmer ! )

slide13

KX-TDA

System Update (4/14)

All Software Update

MPR card

SD Card adapter

SD card

New program

files

PC-Program

All of the new files can also be installed by the direct overwriting of the files on SD card with using SD Card adapter of PC.

slide14

a. Select “Maintenance”

MPR Software Update by PC-Program (5/14)

(Program File transfer from PC to SD card)

<Step1> You have to prepare the following program file on your HDD of PC.

(1)Pmpr(Control software)

(2)Dlng0(Language for PT System Program/English), Dlng1(Language #1/English)

(3)DSYS(System data)

<Step2> You have to transfer the program file from HDD of PC to SD card.

b. Select “File Transfer PC to PBX”

Then file select dialogue box appears,

you have to select following target

program file one by one..

(Pmpr, Dlng0, Dlng1, DSYS)

c. After you select the program file, this dialogue box

appears.

Program file transfer takes around 20 minutes by USB.

When transfer finished, “completed” message appears,

and program file name is registered automatically into

the memory.

slide15

After you decided the program file, this dialogue box appears. Program file transfer takes a few minutes by USB. When transfer finished, “completed” message appears, and program file name is registered automatically into the memory.(See Operation3)

System Update by PC-Program (6/14)

Operation1: Program File Transfer

You must prepare the program file on your HDD beforehand.

a. Select “Utility”

  • Select “File Transfer PC to PBX” Then file select dialogue box appears, you can select target program file.
slide16

a. Click target card status

  • Click “Command” buttonThen click “OUS” button for change the status.

System Update by PC-Program (7/14)

Operation2: Card status change to out of service

Program file load is available only for out of service status card.

Open “Configuration-SLOT” screen and change the status.

slide17

System Update by PC-Program (8/14)

Operation3: Program File View and Load (1/4)

It shows the file which is available for download.

a. Select “Utility”

b. Select “SD Card File View and Load”

Then following screen appears.

  • This screen gives an information as kind of files that the memory card has.The first character of the program file is “P”.For example, PDHLC is DHLC/DLC card’s program.
slide18

Click the Button.[Detail]: The program file detail is shown. You must click if you load the program.Except for program file, this button is invalid.[Cancel]: Close this screen.

  • Select target program file.PDHLC: DHLC/DLC cardPSLC: SLC cardPT1: T1 cardPPRI23: PRI23 cardPCSINF: CSINF cardPOPB3: OPB3

System Update by PC-Program (9/14)

Operation3: Program File View and Load (2/4)

You must select target program file from the memory.

slide19

Select target card.It shows current available card number and name.[All]: Load to all available card.

  • Program file header information of the memory.
  • Click the [View] Button.Program file header information of the target card is shown.

System Update by PC-Program (10/14)

Operation3: Program File View and Load (3/4)

It shows program file header information.

slide20

Click the [Cancel] Button.This screen disappears.

  • Click the [Load] Button.Program file load is started.The load takes a few minutes.When loading finished, “completed” message appears, and target card will change in service status automatically.

System Update by PC-Program (11/14)

Operation3: Program File View and Load (4/4)

You should compare header information of card and memory.

slide21

Files of SD Card (12/14)

Control Software of KX-TDA system.

File is always loaded to the DRAM when the system is started.

Backup of the software for each type of LPR cards.

They are manually downloaded to each card by the operation from PC-Program.

Backup of the software for each type of CS unit for the wireless terminal.

They are manually downloaded to each card by the operation from PC-Program.

slide22

Files of SD Card (13/14)

System data.

Files are always loaded to the DRAM when the system is started.

Language data.

5 different language data can be stored for the display on PT.

They are selectable from the operation of PT individually.

Files are always loaded to the DRAM when the system is started.

slide23

Files of SD Card (14/14)

Default data.

When the system data is cleared, the default system data is created by using those data.

By updating those files, you can change the default parameter of the system.

Same types of the data-set is prepared in PC-Programming and downloaded to this area by using the quick-setup operation.

slide24

Chapter 5

Programming

Thank you very much !