1 / 12

Lecture #26

OUTLINE Modern BJT Structures Poly-Si emitter Heterojunction bipolar transistor (HBT) Charge control model Base transit time Reading: Finish Chapter 11, 12.2. Lecture #26. Modern BJT Structure. Narrow base n+ poly-Si emitter Self-aligned p+ poly-Si base contacts

badu
Download Presentation

Lecture #26

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OUTLINE Modern BJT Structures Poly-Si emitter Heterojunction bipolar transistor (HBT) Charge control model Base transit time Reading: Finish Chapter 11, 12.2 Lecture #26 EE130 Lecture 26, Slide 1

  2. Modern BJT Structure • Narrow base • n+ poly-Si emitter • Self-aligned p+ poly-Si base contacts • Lightly-doped collector • Heavily-doped epitaxial subcollector • Shallow trenches and deep trenches filled with SiO2 • for electrical isolation EE130 Lecture 26, Slide 2

  3. Polycrystalline-Silicon (Poly-Si) Emitter • bdcis larger for a poly-Si emitter BJT as compared with an all-crystalline emitter BJT, due to reduced dpE(x)/dx at the edge of the emitter depletion region Continuity of hole current in emitter EE130 Lecture 26, Slide 3

  4. Emitter Gummel Number w/ Poly-Si Emitter where SpDEpoly/WEpoly is the surface recombination velocity For a uniformly doped emitter, EE130 Lecture 26, Slide 4

  5. Emitter Band Gap Narrowing To achieve large bdc, NE is typically very large, so that band gap narrowing (Lecture 8, Slide 5) is significant. DEGE is negligible for NE < 1E18/cm3 N = 1018 cm-3: DEG = 35 meV N = 1019 cm-3: DEG = 75 meV EE130 Lecture 26, Slide 5

  6. Narrow Band Gap (SiGe) Base • To improve bdc, we can increase niB by using a base material (Si1-xGex) that has a smaller band gap • for x = 0.2, DEGB is 0.1eV • Note that this allows a large bdc to be achieved with large NB (even >NE), which is advantageous for • reducing base resistance • increasing Early voltage (VA) EE130 Lecture 26, Slide 6

  7. EXAMPLE: Emitter Band Gap Narrowing If DB = 3DE , WE = 3WB , NB = 1018 cm-3, and niB2 = ni2, find bdc for (a) NE = 1019 cm-3, (b) NE = 1020 cm-3, and (c) NE = 1019 cm-3 and a Si1-xGex base with DEgB = 60 meV (a) At NE = 1019 cm-3, DEgE35 meV (b) At NE = 1020cm-3, DEgE 160 meV: (c) EE130 Lecture 26, Slide 7

  8. Charge Control Model A PNP BJT biased in the forward-active mode has excess minority-carrier charge QB stored in the quasi-neutral base: In steady state, EE130 Lecture 26, Slide 8

  9. Base Transit Time, tt • time required for minority carriers to diffuse across the base • sets the switching speed limit of the transistor EE130 Lecture 26, Slide 9

  10. Relationship between tB and tt • The time required for one minority carrier to recombine in the base is much longer than the time it takes for a minority carrier to cross the quasi-neutral base region. EE130 Lecture 26, Slide 10

  11. Drift Transistor: Built-in Base Field The base transit time can be reduced by building into the base an electric field that aids the flow of minority carriers. • Fixed EgB , NB decreases from emitter end to collector end. B - E C Ec Ef Ev • Fixed NB , EgB decreases from emitter end to collector end. - E B C 1 dE = C E Ec Ef q dx Ev EE130 Lecture 26, Slide 11

  12. EXAMPLE: Drift Transistor • Given an npn BJT with W=0.1mm and NB=1017cm-3 (mn=800cm2/Vs), find tt and estimate the base electric field required to reduce tt EE130 Lecture 26, Slide 12

More Related