1 / 14

SUBPART H PERFORMANCE CLASS B AEROPLANES ALLEVIATION AND METHOD OF CALCULATING PERFORMANCE

SUBPART H PERFORMANCE CLASS B AEROPLANES ALLEVIATION AND METHOD OF CALCULATING PERFORMANCE. BASIC IDEA. JAR-OPS 1.535 (a)(3) assumes that engine failure occurs at the point on the all engine take-off flight path where visual reference for the purpose of avoiding obstacles is lost.

badru
Download Presentation

SUBPART H PERFORMANCE CLASS B AEROPLANES ALLEVIATION AND METHOD OF CALCULATING PERFORMANCE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SUBPART H PERFORMANCE CLASS B AEROPLANES ALLEVIATION AND METHOD OF CALCULATING PERFORMANCE (C) Olli Hänninen, FCAA

  2. BASIC IDEA JAR-OPS 1.535 (a)(3) assumes that engine failure occurs at the point on the all engine take-off flight path where visual reference for the purpose of avoiding obstacles is lost. This point means the ceiling or VV (=vertical visibility) as reported in METAR.  Calculations do NOT ensure obstacle-free flight path if engine failure occurs before ceiling or VV. (C) Olli Hänninen, FCAA

  3. GRAPHIC ILLUSTRATION (C) Olli Hänninen, FCAA

  4. WHAT ABOUT ENGINE FAILURE BELOW CEILING? Appendix 1 to JAR-OPS 1.430 paragraph (a)(3)(ii) ”ensures” possibility to avoid obstacles or make a forced landing broadly in the direction of the take-off (see also IEM OPS 1.535): (C) Olli Hänninen, FCAA

  5. Appendix 1 to JAR-OPS 1.430 paragraph (a)(3)(ii) EFFECT ON TAKE-OFF WEIGHT • Definition as presented above: • engine feilure height = ceiling or VV (vertical visibility) • Ceiling is high  Two-engine segment is long •  Take-off weight is high • Ceiling is low  Two-engine segment is short •  Take-off weight is low • The better the weather, the higher the take-off weight. • Pilots can either reduce the take-off weight or wait for better weather. (C) Olli Hänninen, FCAA

  6. AEROPLANES WITH VERY POOR PERFORMANCE • Aeroplanes with very poor performance may not be able to maintain positive take-off climb gradient in case of engine failure. For these aeroplanes the above presented complies: • ”1500 m is also applicable if no positive take-off flight path can be constructed.” • If ceiling is above 300 ft and RVR/visibility is 1500 meters or greater THEN OBSTACLES NEED NOT BE CONSIDERED. Only runway length is needed to considere. (C) Olli Hänninen, FCAA

  7. CALCULATING THE FLIGHT PATH JAR-OPS 1.535, Appendix 1 to JAR-OPS 1.525(b) and AMC OPS 1.535(a) represent methods how to calculate average climb gradients for two-engine and one-engine segments: Example from AMC OPS 1.535(a): There is only little information on performation of aeroplanes of performance class B in their Airplane Flight Manuals (AFM). Normally at least take-off run distance and two-engine & one-engine climb gradients are presented in the AFM. Yet that information is adequate for flight path approximation. However the information concerning contamined runways is not included neither in AFM nor in JAR-OPS 1. (C) Olli Hänninen, FCAA

  8. CONTAMINED RUNWAYS JAR-OPS 1.530 (c)(4) requires that take-off runway’s condition is considered.  AMC OPS 1.530(c)(4) represent’s correction factors for few conditions only: What about slush, snow and ice?  CAA Finland made a study on this subject: Aeroplane acceleration data (Beech King Air C90 and Piper PA-31-350 Chieftain) was recorded with differential GPS. Acceleration data was then processed according to AMJ 25X1591 (AMJ for JAR 25; nowadays withdrawn and waiting for revision). Results to the study are presented on the following page. (C) Olli Hänninen, FCAA

  9. CORRECTION FACTORS FOR CONTAMINED RUNWAYS Above mentioned study resulted as 3 tables. Example is shown below. (C) Olli Hänninen, FCAA

  10. HOW TO OBTAIN INFORMATION ON OBSTACLES? • Obstacle information should be represented in AIP. Until now only Finland has published both AOC-A and AOC-C obstacle information in the AIP. Therefore alternate methods are needed. Ofcourse if the aeroplane can follow appropriate SID-method then the obstacles are cleared, but class B aeroplanes are usually not capable to do this. • We can use the opposite runway’s non-precision approach method for take-off. Suitable methods are: omnidirectional departures, NDB, VOR/DME… Two last mentioned use obstacle clearances of 75, 150 and 300 m depending on fix’s distance from the threshold. It is evident that if the aeroplane can fly the opposite runway’s non-precision approach prosedure upwards then it will have sufficient obstacle clearances. These procedures all have adequate obstacle clearances in the horizontal plane. (C) Olli Hänninen, FCAA

  11. OMNIDIRECTIONAL DEPARTURES Omnidirectional departures represent procedure design gradient (PDG) until a certain height and after that height 3,3% gradient is required. Obstacle-free surface is still only 2,5 % so one-engine climb gradient is required to be 2,5 % (possible for most of the class B aeroplanes). (C) Olli Hänninen, FCAA

  12. USING OPPOSITE RUNWAY’S NON-PRECISION APPROACH -CHART • Aeroplane must climb until OCA(H) (= 500 ft) before the DEP. • Aeroplane must climb and reach each fix’s height (= 1520 ft) on given horizontal distances (= 4,6 nm). NOTE: Each height may be subtracted by appropriate obstacle clearance (75, 150 or 300 m), but 50 ft according to JAR-OPS 1.535(a) shall be added to resulting height. (C) Olli Hänninen, FCAA

  13. HOW TO REPRESENT CALCULATIONS FOR PILOTS? • Pre-flight performance calculations must be easy to be used. • Variables affecting on performance are the following: • -power setting • -outside air temperature • -presure altitude / QNH • -take-off weight • -wind • -runway contaminants • -obstacle height • -ceiling / vertical visibility = assumed engine failure height • Computer program would be ideal to do performance calculations, but it is the most expensive option. •  How to represent 8-dimensional information on 2-dimensional paper? See example slides on how Finnish operators have solved the problem. (C) Olli Hänninen, FCAA

  14. Flight path approximation and obstacle clearances can be calculated as is presented above in this memo. These methods are used by many operators in Finland. This calculation however requires experticing and is done by consultants. All feedback is welcomed! Please contact: Olli Hänninen Inspector, Flight Operations CAA Finland Address: Ilmailutie 9, 01531 VANTAA Telephone: +358 (0)9 8277 2422 Email: olli.hanninen@fcaa.fi (C) Olli Hänninen, FCAA

More Related