This 1T/h EFB pellet production line is specially designed for processing Empty Fruit Bunches into biopellets. We also supply other biomass materials pellet plant design. 24/7 support and service.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Azeus Machinery Co.ltd
Email: [email protected]
1t/h EFB Pellet Plant
1T/h EFB pellet Plant Introduction
If you are planning to build your own EFB pellets plant, we strongly recommend that you choose this production line, since this is the most popular EFB pellet production configuration. This 1T/h EFB pellet production line has compact structure, so it is easy to operate and of high performance. Besides, the key parts adopt high quality alloy steel adds wear-resisting material, prolong service life of 5 to 7 times, greatly reduce your production cost and expenses.
Specification for EFB Pellet
★ Moisture < 12%
★ Ash Content = 5%
★ Volatile Material = 75%
★ Carbon Content = 13%
★ Heat Energy = 4000 kcal/kg
Features of 1t/h EFB Pellet Production Line
★ This EFB pellets production line can perfectly solve the tricky problem of EFB being material with long and hard fiber and high moisture content for pelletizing.
★ The equipment can be strictly set and customized.
★ With consecutive and reasonable process routing, each standalone machine is of high efficiency and low power consumption.
★ Electric control system makes the operation of whole production line much easier.
For 1t/h EFB Pellet Plant, we Equip the Following Machines
1.AZS-G313D EFB Shredder
This empty fruit bunch shredder is a drum-type machine to improve the used EFB utilization rate, and it can process the EFB into fiber status, mainly used for the massive EFB that is not easy to process for its hard fiber texture.
2. Rotray Drum Dryer for EFB Fiber
The best moisture content to pelletizing is about 13-15%, while the moisture content in EFB is about 50%~60%, so drying process is necessary before making into renewable pellets to meet the energy demand of industries. Our Rotary Dryer is specially designed for drying EFB material, which can realize to reduce the moisture from 60% to 10% one time in large scale. Besides, its stove is fueled by sawdust, wasted wood, coal, which can save electricity consumption largely.
3. AZS-CF1000 EFB Fiber Crushing Machine
EFB fiber crushing machine is technically applied to crush the EFB fiber into small pieces for pelletizing process. Usually this machine can be combined with the EFB shredder machine. The materials for processing is delivered by conveying belt; equipped with high-intensity magnetic separator to sieve metals to avoid damaging the cutter, and safety vertical-roller to avoid hand injury.
4. MZLH420 EFB Pellet Mill
MZLH Wood Ring Die Pellet Mill is the most suitable for compressing high density biomass materials such as hardwood, palm fiber and EFB (empty fruit bunch).It has the following features
A. Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive.
B. Special design of feed conditioner adopts the frequency-conversion speed regulating control to guarantee EFB pellets quality.
C. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble.
5. SKLN1.5 type Biopellet Cooler
After the pelletizing process, the temperature of the EFB pellet is about 60-80 degree and the moisture content about 15%, so a Cooler is needed to reduce about 3-4% moisture, so that the EFB pellet is easy to store. In order to satisfy the different need from different clients, we develop one kind of new SKLN Counter flow Cooler. Obvious cooling effect, no cooling dead angle, and the finished product temperature can be less than 3℃ to 5℃ higher of the room temperature, so this cooler is your first choice for cooling EFB pellets. One SKLN1.5 type counter flow cooler is included in this production line.
6. DCS-25 CS1 Pellet Packing Machine
After cooling, the packing process is necessary to protect the EFB pellet from damp and dust. In this process, we assemble our best packing machine to you. This packing machine adopts two weighing bodies and high speed weighing system, can be used alternately or simultaneously, high efficiency and flexibility.