1 / 6

Steps of Replacing a Car Windscreen

A car windscreen is the first layer of security, but one more point is that it is really fragile and can get damaged for a number of reasons. In this situation, it becomes important that you get it replaced and the best thing about this repair or replacement. It can be done through DIY despite the fact that the best step is to visit a car window replacement company. • It is recommended to cover up the heater and air vents with masking tape and newspaper to prevent small objects from falling into them

autoglass
Download Presentation

Steps of Replacing a Car Windscreen

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Steps of Replacing a Car Windscreen As this season approaches, make sure that you check the car window screens as well as your auto glass by yourself and get it checked by an expert as well. Experts say that to make sure that chipping does not weaken the component, make sure that you cover it immediately with sticky tape, which will prevent dirt from getting into the chip.

  2. Detach Parts • Before replacing, the first step includes removing any parts that could get in the way. • This will involve everything like wipers and rear-view mirrors and others. • It is recommended to cover up the heater and air vents with masking tape and newspaper to prevent small objects from falling into them

  3. Check the Rubber • The next step involves checking the rubber around the screen to make sure that it is not damaged at all. • If it is cracked, withered or damaged, you’ll first have to chance it and then proceed with the auto glass replacement task. • This can be done easily by running a flat knife or a screwdriver around the frame to lift it away from the windscreen

  4. Remove Glass • The next step involves removing the damaged glass and you’ll be able to do this easily by simply pushing the part from inside the car. • However, you need to be very careful as windscreen could be very heavy and, therefore, don’t forget to seek the assistance of a friend.

  5. Ready the Frame and Glass • Once the glass is removed, you’ll have to clean the frame to remove any dirt and rust. • If the older rubber is fine, use that or else use a new one and place it around the edge of the car windscreen. • Make sure that the rubber is in line with the outside edge. • The next step would be to apply your sealant to the outside edges and once done, it is ready to be placed.

  6. Thanks If any Question regarding the car glass repair, or windscreen replacement??? Call: - 07 3344 4466 | 07 32190068 | 040404 1923 Visit - http://www.autoglasswarehouse.com.au/

More Related