underground stormwater detention tanks - Australiantank

1. AUSTRALIAN TANKS IS DEDICATED TO PRODUCING QUALITY, ENGINEERED SOLUTIONS, WORKING WITH PLUMBING, CIVIL AND CONSTRUCTION CONTRACTORS TO PROVIDE CUSTOM DESIGNED SOLUTIONS. WE WORK CLOSELY WITH CIVIL, HYDRAULIC AND CONSULTING ENGINEERS TO FIND THE BEST SOLUTIONS TO THEIR CHALLENGES AND ARE REGULARLY SPECIFIED IN ENGINEERING DESIGNS AND PLANS. MANY OF OUR SOLUTIONS ARE SIGNED OFF BY ENGINEERS AS BEING MORE EFFICIENT AND COST EFFECTIVE ALTERNATIVES TO MORE TRADITIONAL SPECIFIED PRODUCTS.

2. Underground Stormwater Detention Tanks The Australian Tanks heavy duty trafficable detention systems consist of 7,000 litre or 12,000 litre rectangular tanks which are easily interconnected in multiples to create any volume quickly and very cost effectively.

3. Why Choose Pre Cast Over 'Block and Slab' Traditionally, OSD installers have heavily relied on ‘block and slab’ solutions to build On Site Detention tanks and systems. As the necessity for On Site Detention systems has increased, so too has the reliance on those traditional labour and time-intensive block and slab detention tanks. And, as with all demand increases, the costs have increased for slab work, block walls, suspended roofing and waterproofing. More importantly the on site occupational health and safety requirements have made it more onerous for builders and contractors – this has also lead to increasing costs as well as the need for considerably more manpower and paperwork for Project Managers on site.

4. Cheap Water Tanks Water tanks must be maintained to keep your tank and the water in it clean. The amount of maintenance is periodic and minimal. There are some simple steps that need to be followed; Check the screens to ensure they are in good condition to prevent rodents, birds and other animals, including mosquitoes, from getting inside the tank Minimise organic matter build up by cleaning gutters and down pipes The gutters and screens should be cleaned two to three times per year, depending on the amount of leaf litter and other material around the building. Between big rainfalls clean gutters and screens. Flush out first flush system.

5. Water Pumps Gold Coast The full range of Australian Tanks systems are a ‘single pour’ precast concrete tank, constructed with a built-in anti- floatation base where no additional ballast is required for installation in high water table areas. The unique anti-floatation design provides on-site efficiencies and financial savings from potentially not having to manage water trucks on-site to add ballast in the tanks (May still be required prior to backfilling depending on the water height), and not requiring project management of concrete trucks to pour and tie in a ballast footing.

6. Fire Protection Water Storage Tanks Whether you are harvesting or collecting rain water for use at home or as part of a reuse system in a commercial or industrial setting, the Australian Tanks range of anti-floatation and trafficable tanks offer ease and simplicity for underground solutions

7. Aussie Tanks – Australian Tank Maintenance costs over the total life of a pump station can be costly, and run second behind electricity costs. For this reason it is imperative that just as a pump is selected as close to its best efficiency point, a tank is selected that provides a hydrodynamic efficient pump well. Problem pump stations are expensive for owners. Callouts for blockages, fouled level control equipment, or frequent requirement for sucker trucks to remove sedimentation can be greatly reduced with the use of a correctly sized wet well - potentially saving end users 1000’s of dollars annually. A tight diameter allows for a much better hydrodynamic area around the pumps, allowing;

8. Coated Fuel Spill Tanks Australian Tanks anti-floatation base and extra heavy duty trafficable rating makes the 10,000 or 20,000 litre tank perfect for fuel service stations and fuel depot spill tanks. Australian Tanks has a solutions approach and we can apply tanks with relevant hydrocarbon resistant specified coating. The tanks are easy, fast and safe to install under driveway areas in fuel depots, ensuring safe install even when empty with heavy trucks driving over them.

9. Water and Waste Water Management Solutions Australian Tanks handles all contracts with the same care, courtesy and commitment to successful outcomes whether the job is right next door or on the other side of the country. Australian Tank search for the most cost effective transport solutions and approach delivery with an attitude of “no area too hard or timing too tight for us to work towards” Australian Tanks is dedicated to producing quality, engineered solutions, working with plumbing, civil and construction contractors to provide custom designed solutions When dealing with Australian Tanks you immediately realise that we understand customer service, loyalty and commitment. Quality is of the highest standard. Customer focus is our point of difference.

10. EMAIL ID - australiantank@gmail.com Address 1 22-24 Jade Drive Molendinar QLD 4214 PO Box 3337 Address 2 Nerang BC, QLD 4211 http://www.australiantan ks.com.au Website Name