1 / 72

FAA/Asphalt Institute Airport Pavement Workshop October 18-20, 2011 Newport Beach, California

FAA/Asphalt Institute Airport Pavement Workshop October 18-20, 2011 Newport Beach, California. Hector Daiutolo. The Benefit of Runway Grooving. Problem: The Water Covered Runway www.ismaeljorda.com. Runway Grooving.

Download Presentation

FAA/Asphalt Institute Airport Pavement Workshop October 18-20, 2011 Newport Beach, California

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FAA/Asphalt Institute Airport Pavement Workshop October 18-20, 2011 Newport Beach, California Hector Daiutolo The Benefit of Runway Grooving

  2. Problem: The Water Covered Runway www.ismaeljorda.com

  3. Runway Grooving • Misconceptions Have Developed Relative to Its Purpose During Its More Than 40 Years of Application.

  4. Runway Grooving • Prudent to Stress Reasons for Which It Is NotUsed

  5. Runway Grooving • NotUsed to Provide Drainage of Water from the Pavement Surface

  6. Drainage • Provided by the TransverseSlope of the Pavement Surface • Grooves Are Cut in the Runway Surface Transversely to the Pavement Centerline and Make a Secondary Contribution to Drainage.

  7. Runway Grooving • NotUsed to Provide an Increase in the FrictionCapability of the Pavement Surface

  8. Friction • FrictionCapability of the Pavement Surface Provided by the Quality of the Microtexture - Macrotexture Combination

  9. Runway Grooving • Provides ForcedWaterEscape from the Pavement Surface under Aircraft Tires Traveling at High Speed

  10. Runway Grooving • Does Not Eliminate Hydroplaning • ReducesHydroplaning to a Manageable Level • A HigherDegree of Contact is Maintained Between AircraftTires and the PavementSurface under the Condition of Standing Water.

  11. Runway Grooving • Enables Pavement Surface Microtexture - Macrotexture Combination to Provide SufficientBraking and DirectionalControl to Aircraft • Slight to Significant as Speed of Aircraft or Water Depth on Pavement is Reduced

  12. Runway Grooving • Reduces Dynamic Hydroplaning (Standing Water) • Reduces Viscous Hydroplaning (Wet Pavement with Little to No Standing Water)

  13. Rule of Thumb for Water Covered Runways Servicing Aircraft Operations • Transverse Slope Provides Drainage. • Texture of Pavement Provides Friction. • Grooving Enables Aircraft Tires to Contact the Pavement.

  14. Runway Grooving • In the Presence of Water, Totally Worn Aircraft Tires Experience Better Braking on a Grooved Pavement than Newly Treaded Tires on a Nongrooved Pavement.

  15. Porous Friction Course Substitutes for Runway Grooving • Provides Drainage of Water from the Pavement Surface (Primary) • Provides ForcedWaterEscape from the Pavement Surface under Aircraft Tires Traveling at High Speed Similar to Grooving (Secondary) • Application Limited Relative to Density of Aircraft Operations

  16. Not Substitutes for Runway Grooving • Tire Tread (Demonstrated in Full Scale Tests) • Coarse Pavement Surface Macrotexture (Demonstrated to a Limited Degree in Full Scale Tests)

  17. FAA Full Scale Test Program Braking/Hydroplaning • 1975 to 1983 • 600 Full Scale Tests • Dynamic Test Track • Asphalt and Portland Cement Concrete • Variety of Pavement Surface Treatments • Wet to Flooded Conditions • Speeds of 30 to 150 Knots

  18. FAA Full Scale Test Program Braking/Hydroplaning • Aircraft Tire, 49 by 17, 26 ply, type VII (Boeing 727 and 747) • Tire Pressure, 140 psi • Wheel Load, 35,000 lbs • Maximum Braking Data Base • Test Facility, NAEC (Navy), Lakehurst, New Jersey

  19. FAA Full Scale Test Program Braking/Hydroplaning Water Depth Conditions on Pavement • Wet 0.00 in. Standing Water • Puddled 0.10 in. Standing Water • Flooded 0.25 in. Standing Water

  20. Launch End of Test Track

  21. Launch End of Test Track

  22. Dynamometer with Tire-Wheel Assembly

  23. New and Worn Tire Tread

  24. Saw Cutting Grooves in the Test Pavement

  25. Test Pavement at the Recovery End of the Test Track

  26. 1/4 x 1/4 in. Grooves Spaced at 1 1/4 , 2, and 3 ins.

  27. 1/8 x 1/8 in. Grooves Spaced at 1/2 in. and Porous Friction Course

  28. Experimental Percussive Grooves at 3 in. Spacing

  29. Grooved Pavement • FAA Standard 1/4 x 1/4 Saw-Cut Grooves Spaced at 1½ inches • Represented by CurveFits between Data Points for 1¼inch and 2inchSpacing

  30. Braking on a Wet Asphalt Pavement

  31. Braking on a Puddled Asphalt Pavement

  32. Braking on Flooded Asphalt Pavement

  33. Braking on a Wet Asphalt Pavement

  34. Braking on an Asphalt Pavement Under a Heavy Downpour

  35. Braking on an Asphalt Pavement Under a Heavy Downpour (Flooded)

  36. Essentials of an Aircraft Braking/Hydroplaning Test System • Full Scale • High Speed • Standing Water • Uniformity of Water Depths • Close Control of Variables

  37. Aircraft Braking/Hydroplaning Test System Scenarios • Full Scale Tire-Wheel Assembly on a Dynamic Test Track (Best Control of Variables) • Aircraft on a Runway

  38. FAA Standard and Proposed Saw-Cut Groove Patterns Standard Proposed

  39. FAA Standard Groove Pattern vs. High Macrotexture - New Tire on a Puddled Portland Cement Concrete Pavement

  40. Landing of a Jet Transport Aircraft on a Stone Matrix Asphalt (SMA) Runway under Rainfall Conditions

  41. Takeoff of a Jet Transport Aircraft on a Stone Matrix Asphalt (SMA) Runway under Rainfall Conditions

  42. FAA Standard Groove Pattern vs. High Macrotexture - New Tire on a Puddled Portland Cement Concrete Pavement

  43. Relationship between Results on the Test Track and Performance of the Aircraft on a Runway

  44. Braking on a Wet Asphalt Pavement

  45. Braking on a Wet Asphalt Pavement

  46. Braking on Wet Porous Friction Course

  47. Dynamic Test Track Data Can Be Used to Simulate Tire-Pavement Interaction During the Landing and Takeoff of a Jet Transport Aircraft with Worn Tires on a Runway under Rainfall Conditions.

  48. Inference Drawn from Simulation on Asphalt Pavement • RunwayGrooving Offers the Potential to Double The Magnitude of Tire-PavementInteraction for Jet Transport Aircraft Operating on Water Covered Runways.

  49. Landing

  50. Fast Touchdown at 150 Knots

More Related