Xlr cables
This presentation is the property of its rightful owner.
Sponsored Links
1 / 11

XLR Cables PowerPoint PPT Presentation


  • 74 Views
  • Uploaded on
  • Presentation posted in: General

XLR Cables. How to assemble your own XLR in 10 easy steps!. 1. Cut a length of cable. 2. Slide a shield over the end of the Cable. 3. Strip the end of the rubber of off the wire. 4. Separate the shield (ground) wires from the hot and cold wires. Strip the ends of the hot and cold.

Download Presentation

XLR Cables

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Xlr cables

XLR Cables

How to assemble your own XLR in 10 easy steps!


1 cut a length of cable

1. Cut a length of cable


2 slide a shield over the end of the cable

2. Slide a shield over the end of the Cable


3 strip the end of the rubber of off the wire

3. Strip the end of the rubber of off the wire


4 separate the shield ground wires from the hot and cold wires strip the ends of the hot and cold

4. Separate the shield (ground) wires from the hot and cold wires. Strip the ends of the hot and cold.


5 position the wire and the xlr head male into the clamp get ready to solder

5. Position the wire and the XLR head (male) into the clamp. Get ready to solder!


6 place the shield ground wire into receptor no 1 and solder into place

6. Place the shield (ground) wire into receptor No. 1 and solder into place


Xlr cables

7. Repeat the process for the hot and cold wires; the red (hot, +) solders to receptor No. 2, and the black (cold, -) to No. 3.


8 repeat steps 2 through 7 for the other end of the cable female

8. Repeat steps 2 through 7 for the other end of the Cable (female)


Xlr cables

9. Check connections. Test each contact on one end with each contact on the other (9 tests). There should only be a reading for like connections (hot-hot, cold-cold, ground-ground).


10 screw the shields onto the xlr heads hold the cable proudly and admire your work

10. Screw the shields onto the XLR heads, hold the cable proudly, and admire your work!


  • Login