1 / 12

Laser Wire

Laser Wire. Lens Performance Review. Myriam Newman LC-ABD Meeting University of Oxford Thursday, April 13. Laser-Wire Team Members: Grahame Blair, Stewart Takashi Boogert, Alessio Bosco, Laura Corner, Lawrence Deacon, Nicolas Delerue, Brian Foster, David Howell, Pavel Karataev,

audreyguzman
Download Presentation

Laser Wire

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laser Wire Lens Performance Review Myriam Newman LC-ABD Meeting University of Oxford Thursday, April 13 Laser-Wire Team Members: Grahame Blair, Stewart Takashi Boogert, Alessio Bosco, Laura Corner, Lawrence Deacon, Nicolas Delerue, Brian Foster, David Howell, Pavel Karataev, Armin Reichold, Roman Walczak Laser-Wire

  2. KEK ATF Laser-Wire Interaction Point Smallest Spot Size at KEK ATF Laser-Wire as of March 2007 Laser-Wire

  3. lens How do we use the laser waist to measure the electron beam? Laser-Wire

  4. window Lens Lens Design Lens Type: Doublet of Aspheric and Spheric Triplet Fused Silica System Vacuum Seal Focus 31.2438 mm diameter 5 3 4 2 6 7 60.0700 mm 54.7608 mm 36.7757 mm 24.0757 mm 5.30916 mm 17.9851 mm 12.7 mm Laser-Wire

  5. Lens Study Objectives • Define a metric for how ‘good’ or ‘useable’ the lens is, i.e.: • Define the minimum and maximum tilt in (mrad) for the lens to achieve a 1micron spot size • Determine the angles with which the laser can enter the lens and achieve a 1 micron spot size • Define a translation range for which a 1 micron spot size can be achieved if the laser does not go through the center of lens in (x, y) • Understand the relationship between the spot size, laser waist, and focus position in Z • Understand how the relationship between rotations, translations and how they affect the position of the laser waist, spot size and waist intensity • Develop Alignments Strategy • Use the results to develop future lens designs, simulations, and lens testing procedure Laser-Wire

  6. Experimental Set Up focus Z 0 - + Profiler Window Lens Laser-Wire

  7. Profiler Window Lens Experimental Set-Up Oxford Laser-Wire Lab Laser-Wire

  8. Exaggerated Lens Tilt Animation Double click on the figure to play video clip Laser-Wire

  9. Near Best Focus Best Focus 12/15/06 Laser-Wire

  10. Lens Performance in Tilt (au) Roughly 1.5 mm Laser-Wire

  11. (au) Roughly 4 mm Laser-Wire

  12. Conclusions Understanding the lens behavior provides the following pertinent information: • The relationship between the lens rotation, waist location, and spot size. • How the spot size varies with rotation and shift • Where the waist will be in the chamber in relation to the electron beam in order to compensate with the chamber movers • How sensitive the spot size growth is when the lens is tilted or the laser enters the lens at an angle • A verification and test procedure for testing future lenses that affect future lens design and use • Laser-Wire simulations • Deriving an alignment procedure for setting up the optics in the experiment Laser-Wire

More Related