70 likes | 72 Views
<br>Installing a 10th-generation Exhaust For the Honda Civic Hatchback exhaust system can be a fun and rewarding DIY project for any car enthusiast. With the right tools and a little patience, you can improve the performance and sound of your vehicle in just a few simple steps. If you are not comfortable with installing the exhaust system, seek professional help from ARK Performance. For more information click here : https://arkperformance.com/products/honda-civic-hatchback-sport-2017-2021-l15ba-dt-s-exhaust
E N D
A STEP-BY-STEP GUIDE TO THE 10TH GENERATION HONDA CIVIC SPORT HATCH CATBACK
The Honda Civic is a popular car model, in production for many years and a choice of many people. This 10th generation Honda Civic Sport Hatchback is a great car that is well-designed, fun to drive, and performance. Exhaust For Honda Civic Hatchback is one of the ways to improve the performance of your Honda Civic Sport Hatchback. In this step-by-step guide, we will explore the process of installing a 10th-generation Honda Civic Sport Hatch Catback exhaust system
1. Gather the Necessary Tools and Equipment Before you begin the installation process, get all the necessary tools and equipment. You will need a socket wrench set, jack stands, a hydraulic floor jack, penetrating oil spray, and safety glasses. All these tools will help you to install your Exhaust For Honda Civic Hatchback.
2. Remove the Factory Exhaust System Start by unplugging the battery's negative connection. After passing the bolts some time to settle and loosen up, spray them with penetrating oil. Use the hydraulic base jack to lift the rear and support it with jack stands. Use a socket wrench to find the fasteners holding the stock exhaust system to the catalytic converter. Proceed to remove the hangers supporting the exhaust system.
3. Install the New Catback Exhaust System Begin by installing the new catback exhaust system onto the catalytic converter using the bolts provided in the kit. Make sure to tighten them properly but not too tight to cause damage to the threads. Next, attach the new hangers to the rubber grommets in the same location as the factory hangers. You may need a pry bar to push the hangers into place.
4. Exhaust System Enjoy Your New Catback With all these steps you can install a 10th-generation Honda Civic Sport Hatch Catback exhaust system! Not only your vehicle will have an improved exhaust note, but you can see a slight increase in horsepower. With this modification, you can enjoy driving your new upgraded Honda Civic.
website https://arkperformance.com/ Phone Number 909 947 1275 Email Address info@arkperformanceusa.com