1 / 13

PTS-Clipping Method to Reduce the PAPR in ROF-OFDM System

PTS-Clipping Method to Reduce the PAPR in ROF-OFDM System. Speaker : Chi-Han Yu Author : Jianping Wang ; Ying Guo ; Xianwwi Zhou From : IEEE Transactions on Consumer Electronics, Vol. 55, No. 2, MAY 2009. Outline. Introduction PAPR Problem Simulations And Analysis

arien
Download Presentation

PTS-Clipping Method to Reduce the PAPR in ROF-OFDM System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PTS-Clipping Method to Reduce the PAPR in ROF-OFDM System Speaker : Chi-Han Yu Author :Jianping Wang ; Ying Guo ; Xianwwi Zhou From : IEEE Transactions on Consumer Electronics, Vol. 55, No. 2, MAY 2009

  2. Outline Introduction PAPR Problem Simulations And Analysis Conclusions

  3. Introduction(1/3) The ROF(Radio Over Fiber) system has low transmission loss and ultra-wide bandwidth. The OFDM(Orthogonal Frequency Division Multiplexing)system is the multi-carrier transmission technology especially in wireless communication system. The combination of ROF and OFDM systems (ROF-OFDM) has attracted considerable attention for future gigabit broadband wireless communication.

  4. Introduction(2/3) The ROF-OFDM have one main disadvantages When the OFDM symbolswhich have high power entered to optical fiber,it will lead to dispersion and nonlinear. Linear methods usually bring in marked increase in computational complexity. Nonlinear methods usually bring in out-of-band radiation which can deteriorate the BER performance.

  5. Introduction(3/3) There is a new method combined the linear and nonlinear methods, named as Partial Transmit Sequence with Clipping (PTS-Clipping) to reduce the peak-to-average power ratio (PAPR). It will bring in slight change to the BER performance between with and without clipping which makes it feasible to be used in real ROF-OFDM system.

  6. PAPR Problem The high power asks some devices for high performance and it must have high dynamic range, all of these requirements increase the system complexity. We use the simply clipping combined with PTS method. The main algorithm theory of PTS-Clipping method is to select a proper clipping threshold.

  7. PAPR Problem PAPR reduction with PTS

  8. PAPR Problem Clipping method sets a clipping threshold, when the amplitude of the signals over the threshold, then cut the high peak power, so that the peak power had a pre-distortion.

  9. PAPR Problem Where x(n) is the real band pass sample, y(n) is the clipped signal, and A is the clipped level. We use a normalized clipping level, which we call the clipping ratio (CR, CR = A 2 ).

  10. Simulations And Analysis The main idea of PTS-Clipping is to use the merit of PTS method and then use simply nonlinear clipping method to cut the high power value of these minority symbols and we add filtering after clipping.

  11. Simulations And Analysis The picture illustrates the PAPR performances that use PTS and PTS-clipping.

  12. Simulations And Analysis The picture respectively describe the performances of BERSNR of QPSK signals which are processed by PTS and PTS-Clipping.

  13. Conclusion In this paper we investigated the method of PTS and clipping on the performance of ROF-OFDM system. The simulation results show that the proposed PTS-clipping scheme can provide better performance in terms of PAPR reduction when BER has been slightly changed.

More Related