1 / 31

First Detector Concepts for a (M)EIC

First Detector Concepts for a (M)EIC. Detector Requirements from Physics. ep-physics the same detector needs to cover inclusive (ep -> e’X), semi-inclusive (ep -> e’hadron(s)X) and exclusive (ep -> e’p p) reactions large acceptance absolutely crucial (both mid and forward-rapidity)

aquila
Download Presentation

First Detector Concepts for a (M)EIC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. First Detector Conceptsfor a (M)EIC EIC-IAC @ JLab, November 2009

  2. Detector Requirements from Physics EIC-IAC @ JLab, November 2009 • ep-physics • the same detector needs to cover inclusive (ep -> e’X), semi-inclusive (ep -> e’hadron(s)X) and exclusive (ep -> e’pp) reactions • large acceptance absolutely crucial (both mid and forward-rapidity) • particle identification is crucial • e, p, K, p, n over wide momentum range and scattering angle • excellent secondary vertex resolution (charm) • particle detection to very low scattering angle • around 1o in e and p/A direction  in contradiction to strong focusing quads close to IP • small systematic uncertainty (~1%/~3%) for e/p polarization measurements • very small systematic uncertainty (~1%) for luminosity measurement • eA-physics • requirements very similar to ep • challenge to tag the struck nucleus in exclusive and diffractive reactions. • difference in occupancy must be taken into account

  3. Event kinematics scattered lepton 20x250 4x250 4x50 D I S 175o 179o D I F F R A C T I V E without magnetic field EIC-IAC @ JLab, November 2009

  4. Event kinematics produced hadrons (p+) D I S 4x250 4x50 20x250 DIS: small theta important D I F F R A C T I V E without magnetic field EIC-IAC @ JLab, November 2009

  5. Recoil Proton for Diffractive events 4x250 4x50 20x250 EIC-IAC @ JLab, November 2009

  6. ERL-based eRHIC Design 5 mm 5 mm 5 mm 5 mm 20 GeV e-beam 16 GeV e-beam Common vacuum chamber 12 GeV e-beam 8 GeV e-beam 2 x 200 m SRF linac 4 (5) GeV per pass 5 (4) passes (M)eRHIC detector Gap 5 mm total 0.3 T for 30 GeV Polarized e-gun 10-20 GeV e x 325 GeV p 130 GeV/u Au possibility of 30 GeV @ low current operation Beam dump MeRHIC detector Coherent e-cooler PHENIX STAR 4 to 5 vertically separated recirculating passes EIC-IAC @ JLab, November 2009

  7. First ideas for a detector concept Solenoid (4T) Dipole 3Tm Dipole 3Tm FPD FED // // ZDC • Dipoles needed to have good forward momentum resolution • Solenoid no magnetic field @ r ~ 0 • DIRC, RICH hadron identification  p, K, p • high-threshold Cerenkov  fast trigger for scattered lepton • radiation length very critical  low lepton energies EIC-IAC @ JLab, November 2009

  8. IR-Design for MeRHIC I @ IP-2 • no synchrotron shielding included • IP-2: height beam-pipe floor ~6’ (with digging ~10’) EIC-IAC @ JLab, November 2009

  9. ? How to measure coherent diffraction in e+A ? • Beam angular divergence limits smallest outgoing Qmin for p/A that can be measured • Can measure the nucleus if it is separated from the beam in Si (Roman Pot) “beamline” detectors • pTmin ~ pAθmin • For beam energies = 100 GeV/n and θmin = 0.08 mrad: • These are large momentum kicks, much greater than the binding energy (~ 8 MeV) • Therefore, for large A, coherently diffractive nucleus cannot be separated from beamline without breaking up BNL S&T-Review, July 2009

  10. Detection from hadron beam fragments EIC-IAC @ JLab, November 2009 • Tagging from Au fragments and p/n in ep • suppress incoherent scattering / ensure exclusivity • neutrons are detected in ZDC • protons use magnetic rigidity Au:p 2.5:1 • DX magnets disturbs p tagging

  11. IR-Design for MeRHIC IP-2 • no synchrotron shielding included • allows p and heavy ion decay product tagging • IP-2: height beam-pipe floor ~6’ (with digging ~10’) EIC-IAC @ JLab, November 2009

  12. Model Detector @ IP-2 in Geant Solenoid (4T) Dipole 3Tm Dipole 3Tm FPD FED // // ZDC Transfer sketch into Geant and fits in IP-2 EIC-IAC @ JLab, November 2009

  13. MeRHIC Detector in Geant-3 Silicon Strip detector ala Zeus central tracking ala BaBar Drift Chambers Drift Chambers ala HERMES FDC EM-Calorimeter LeadGlas Dual-Radiator RICH ala HERMES High Threshold Cerenkov fast trigger on e’ e/h separation • DIRC: not shown because of cut; modeled following Babar • no hadronic calorimeter in barrel, because of vertical space @ IP-2 EIC-IAC @ JLab, November 2009

  14. MeRHIC Detector in Geant-3 EIC-IAC @ JLab, November 2009

  15. MeRHIC Detector in Geant-3 EIC-IAC @ JLab, November 2009

  16. To Do List EIC-IAC @ JLab, November 2009 • Have done first steps on a detector design • Optimizations needed • magnetic fields • do we need 4T for solenoid and 3Tm for dipole • optimize distance Dipole to Solenoid • need to optimize Dipole gap to have enough place for detectors • what radiation length can we tolerate @ low e’ momentum • impact of beam lines through the detector on physics • need to optimize acceptance at low scattering angle • need acceptance down to 1o • need to include lepton polarimeter in IR design • need to include luminosity monitor into IR design • choose detector technologies  R&D

  17. Concept of Electron Compton Polarimeter for MeRHIC Laser converter calorimeter e+ e LINAC e e hodoscopes P e Electron detector D0 magnet D0 magnet scattered electronmomentum analyzed in dipole magnet measured with Si or diamond strip detector pair spectrometer (counting mode) e+e– pair production in variable converter dipole magnet separates/analyzes e+e– sampling calorimeter (integrating mode)count rate independent Insensitive to calorimeter response 17 MeRHIC Cost Review – Pre Run

  18. Start immediately at 12o’clock • Detector cost savings • have MeRHIC-detector @ IP-12 (size of STAR) • fully staged detector from MeRHIC to eRHIC • vertical space much bigger (room for HCal) • need to buy magnets only once • can stage detector components, i.e. hadronic calorimeter • no moving of components (IP2  IP12) • systematics reduced  same detector for all energies •  only advantages EIC-IAC @ JLab, November 2009

  19. Work done @ JLAB EIC-IAC @ JLab, November 2009

  20. ELIC Detector/IR Layout by R. Ent solenoid ion FFQs dipole bending scattered protons “up” ions electrons IP with crossing angle electron FFQs Distance from IP to electron FFQ: 6 m to ion FFQ: 9m Modest electron final focusing quad field requirements  quads can be made small EIC-IAC @ JLab, November 2009

  21. ELIC detector cartoon - Oct. 09 by R. Ent 8 meters (for scale) Offset IP? 140 degrees TOF HCAL ECAL Tracking DIRC HTCC RICH dipole dipole 1st (small) electron FF quad @ 6 m solenoid Additional electron detection (tracking, calorimetry) for low-Q2 physics not on cartoon Ion beam e beam EIC-IAC @ JLab, November 2009

  22. ELIC Detector Magnetic Field by R. Ent • Central 4T solenoid with 5 meter length and 4 meter ID • Need to add good particle identification detectors up to 40 • degrees on ion side  drives large ID to keep this area “open” • 4T field renders O(1%) or better momentum resolution for • particles with momentum < 10 GeV (and angles > 40 degrees) • Optimize detector to detect particles down to (at least) one degrees • Add 2-3 Tm dipole field to improve momentum resolution at • forward angles. • Two solutions: add dipole, or add dipole to solenoid? • Can in principle also have split dipole, with different polarity • before/after IP, if this helps accelerator design. • 5T solenoid with 0.6T dipole winding: • Integrated transverse (By) field strength • @ 90 degrees 10.9 Tm • @ 40 degrees 15.3 Tm • @ 1 degree 1.4 Tm • May present alternate solution if space is at a premium & 1.4 Tm sufficient field strength at 1o. • Note: all configurations iron free at moment Dipole coils EIC-IAC @ JLab, November 2009

  23. Recoil Tagging in Deeply Virtual Exclusive Reactions on Nuclei by Ch. Hyde e + AZ e’ + AZ’ +(,,J/) k' k Determining exclusivity requires tagging the nucleus in the final state. The typical scale of transverse momentum transfer is given by the rms nuclear radius. q' Mm q ZP ZP' (for nuclei from 4He to 20Ne, this scale ranges from 125 MeV/c to 75 MeV/c) •  For Nuclei ≥ 4He, the recoil nucleus is • INSIDEthe transverse admittance of the FF Quads • Qms≈ 1 mr  PA,transverse ≈ Z·(60 MeV/c) (for 60 GeV ion beam) • Beam spread is larger than 1/RAscale for nuclear imaging. • Z·(60 MeV/c ) > (0.2 GeV/c)/A1/3 (≥75 MeV/c for AZ< 20Ne) • OUTSIDEthe longitudinal admittance of the ring lattice!!! •  The nuclei may be detectable at high resolution with far forward tracking in the lattice by having large dispersion ELIC study EIC-IAC @ JLab, November 2009

  24. Far Forward Ion Tagging at (60 GeV/c) Z by Ch. Hyde EIC-IAC @ JLab, November 2009 • Sample optics at token Roman Pot Telescope position • ELIC typical: Dispersion D = 1m, Beta function b@RP= 2m • ELIC typical: (x,Q) = (250 mm, 125 mr) rms • Use a 10sx Beam Stay Clear (BSC) distance  2.5 mm • Ions are detectable for |dPA||/PA| > BSC/D = 2.5 x 10-3 Skewness 2z (~x/A) of DVCS = long. momentum fraction of a nucleon in projectile ion. • Skewness acceptance: 2z > (2.5x10-3)A  0.05 for 20Ne. • Assumption: 1m drift with 100 mm spatial resolution • dQ = 100 mr  equal to beam Qrms. • PA’ Momentum Resolution = sx/D = 2.5 x 10-4. • D|| = (k-k’-q’)|| = (PA-PA’)|| • s(D||) = (4 x 10-4)(30 GeV/c) A = (12 MeV/c) A • Exclusivity constraint D2 = 2MA(PA’-PA) • Using ELIC arc as spectrometer to a longitudinal momentum transfer resolution of 10-4 by increasing dispersion @ IR will be explored in more detail

  25. BACKUP EIC-IAC @ JLab, November 2009

  26. Event kinematics scattered lepton 20x250 4x250 D I S 4x50 175o 179o D I F F R A C T I V E without magnetic field EIC-IAC @ JLab, November 2009

  27. Event kinematics produced hadrons (p+) 20x250 D I S 4x50 4x250 DIS: small theta important D I F F R A C T I V E without magnetic field EIC-IAC @ JLab, November 2009

  28. Zeus @ HERA I EIC-IAC @ JLab, November 2009

  29. Zeus @ HERA II EIC-IAC @ JLab, November 2009

  30. Hera I vs. Hera II Focusing Quads close to IP Problem for forward acceptance EIC-IAC @ JLab, November 2009

  31. A Detector for Diffraction and lox-x Physics Design by Allen Caldwell: p EM Calorimeter Si tracking stations 2x14 Si tracking stations Compact – fits in dipole magnet with inner radius of 80 cm. Long - |z|5 m Hadronic Calorimeter e EIC-IAC @ JLab, November 2009

More Related