1 / 14

Flight Performance, Stability, and Control PDR

Flight Performance, Stability, and Control PDR. Team Boiler Xpress Ryan beech Matt Basiletti Mike VanMeter Oneeb Bhutta. Flight Performance, Stability & Control PDR. Sizing of horizontal and vertical tails and control surfaces Location of c.g. and aerodynamic center

Download Presentation

Flight Performance, Stability, and Control PDR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Flight Performance, Stability, and Control PDR Team Boiler Xpress Ryan beech Matt Basiletti Mike VanMeter Oneeb Bhutta

  2. Flight Performance, Stability & Control PDR • Sizing of horizontal and vertical tails and control surfaces • Location of c.g. and aerodynamic center • Determination of static margin • Flight Performance

  3. Horizontal and Vertical Tail Sizing Vh - Horizontal tail volume coefficient = 0.50 Vv - Vertical tail volume coefficient = 0.044

  4. Control Surface Sizing • Based on historical data from Roskam Part II Tables 8.1 and 8.2. Homebuilts Single Engine 0.095 0.08 0.42 0.36 0.44 0.42

  5. Control Surface Sizing (cont.) • Sa = 1.35ft2 • Sr = 0.80ft2 • Se = 1.00ft2 • Max. surface deflection is 30 deg.

  6. Static Margin, Aerodynamic Center, and c.g. Xac = 0.46 Xcg = 0.35 SM = 0.11

  7. Tx + P Rx Servo Aircraft k Gyro Block Diagram – Roll Axis

  8. Dynamic Modeling = 0.80 = -0.15

  9. Dynamic Modeling (cont.)

  10. Take-off Performance • Stog = 56.7ft • Abort take-off after 120 feet of ground roll.

  11. Climb Performance • Max. Climb Angle, G G = 7.3 deg.

  12. Turning Performance • Maximum turn rate r = 50ft Vmax = 28ft/s Y= 0.28rad/s

  13. Dihedral Angle • Estimated by Raymer for a mid-wing aircraft to be 2 – 4 degrees.

  14. Remaining Objectives • X-plot sizing • Dihedral Angle • BUILD OUR PLANE!

More Related