1 / 11

NSTX Contributions to ITPA L- and H-mode Global Databases

NSTX Contributions to ITPA L- and H-mode Global Databases. S. M. Kaye 30 July 2003. Initial contributions based on analysis using iz.dat CHERS data Since then, additional atomic physics corrections, n c profiles Contributions will be updated based on newest analysis

aolani
Download Presentation

NSTX Contributions to ITPA L- and H-mode Global Databases

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NSTX Contributions to ITPA L- and H-mode Global Databases S. M. Kaye 30 July 2003

  2. Initial contributions based on analysis using iz.dat CHERS data • Since then, additional atomic physics corrections, nc profiles • Contributions will be updated based on newest analysis • Data contributions include detailed global shot info at toi • Most notably fast ion energy, losses • Determination of tth (TRANSP analysis) • Data include info from waveforms, MPTS, CHERS, EFIT(01), TRANSP • Time smoothing over 15 msec • Zeff from waveforms, or =1.5 (flat profile) • Initial contribution limited to 15 discharges • 8-L, 7-H • H-mode criterion: discharge exhibits sudden decrease in Da not associated with geometry changes, MHD, etc.

  3. Initial set of shots chosen by following criteria • “Good” agreement between magnetics and kinetics stored energy (10-SS/IO, 5-Outside mappings) • H-modes in “steady-state” • Transient discharges included in set of L-modes • tth generally good to within about 30% • Depends on when smoothing is done (before or after tth calculated) • Will be showing “high” numbers (smoothing after tth calculated) Contributions will be updated with results from more comprehensive analysis with latest CHERS data

  4. Transient L-mode

  5. Steady H-mode

  6. All 25 TRANSP Runs

  7. Subset of contributed dataAgreement with EFIT01 better than with EFIT02

  8. Fast ion stored energy ~20 to 35%Fast ion loss ~ 5 to 20%

  9. Plans • Reprocess data with new CHERS input • First run-through already done • Study differences from different mappings • Compile updated global information • Add shots (from 25 already done) • Identify additional discharges for TRANSP analysis • Special attention to Ip, BT, PNBI, etc. “scans” in both L- and H • Examine local transport properties • Subject of future discussion

More Related