1 / 1

Step 1 Turn off water supply by turning the flush tank shut-off valve. Flush to make sure flush tank is empty and water

Installation Instructions. Parts included Complete Handy Spray kit Sealing Tape Mounting Bracket. Parts Needed. Optional Flexible Tank Water Line if current Water Line is stiff metal. Tools Required Adjustable wrench.

antranig
Download Presentation

Step 1 Turn off water supply by turning the flush tank shut-off valve. Flush to make sure flush tank is empty and water

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Installation Instructions Parts included Complete Handy Spray kit Sealing Tape Mounting Bracket Parts Needed. Optional Flexible Tank Water Line if current Water Line is stiff metal Tools Required Adjustable wrench Before beginning installation please assemble Handy Spray kit by inserting attached black rubber washer inside hose connector and screwing on spray wand on top. Step 1 Turn off water supply by turning the flush tank shut-off valve. Flush to make sure flush tank is empty and water has stopped filling. Step 2 Unscrew the connector hose from the shut-off valve. Screw on Handy Spray connector on top of shut-off valve. (Use sealing tape) If existing flush tank hose is stiff brass then also unscrew existing white flush tank nut and remove hose. Screw new flexible hose to underneath flush tank. Step 3 Screw on the compression nut at other end of flexible hose on top of Handy Spray connector and tighten. (use sealing tape) Turn on water and check for drips. Tighten as necessary. Holder can be screwed on to wall or hung on side of flush tank.

More Related