1 / 27

Firmware (CLP-310 Series)

Firmware (CLP-310 Series). Overview - I. Model CLP-310 / CLP-310N / CLP-310W Print Method Multi-pass printing (Y->M->C->K) Printing Speed 4/16 ppm (Color/Mono) Resolution in print Best mode 2400 x 600 dpi Normal mode 1200 x 600 dpi Draft mode 600 x 600 dpi

anson
Download Presentation

Firmware (CLP-310 Series)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Firmware (CLP-310 Series)

  2. Overview - I • Model • CLP-310 / CLP-310N / CLP-310W • Print Method • Multi-pass printing (Y->M->C->K) • Printing Speed • 4/16 ppm (Color/Mono) • Resolution in print • Best mode 2400 x 600 dpi • Normal mode 1200 x 600 dpi • Draft mode 600 x 600 dpi • Duplex mode support • Using Manual Duplex

  3. Overview - II • Supported I/O port • USB (CLP-310) • Network (CLP-310N) • Network, Wireless LAN (CLP-310W) • Memory Size • CLP-310/CLP-310N : 32MBytes • CLP-310W : 64Mbyte • CRUM • C/M/Y/K Toner : S-Chip2 • Initial Toner • Used only once without S-CRUM • Included CLP-310 package, not for sale

  4. Overview - III • CPU • Type : CHORUS3 (ARM 920T core) • Speed : 360MHz • Bus speed : 120MHz • One chip solution (HPVC, I/O, JBIG, network …) • Real-Time OS • pSOS (V2.5) • Driver • SPLC

  5. Overview - IV

  6. Overview - V

  7. ROM Image • ROM image • CLP-310 : 2Mbyte • CLP-310N : 4MByte • CLP-310W : 8Mbyte • ROM release • Boot image • ROM image (without boot image) • Boot + Rom Image

  8. F/W Upgrade - I • Three different ROMs (CLP-310/CLP-310N/CLP-310W) • Network applications (SWAS, SWS) can be used for network port upgrade

  9. F/W Upgrade - II • F/W Upgrade using USB Port • Make sure connecting Printer to the computer with a USB cable • Upgrade in Ready mode • Send ROM image file via USB cable in Ready mode • Ex) Usblist2.exe CLP310N_V1.00.00.10.hd • Upgrade in Special mode • Power ON with pressing ‘STOP key’ • Change Status LED to Orange color • Quickly press ‘STOP key’ again • Change status LED to Green Color  enable F/W upgrade at this time • Send ROM image file via USB cable • Ex) Usblist2.exe CLP310N_V1.00.00.10.hd

  10. F/W Upgrade - III • F/W upgrade using SWS (SyncThru Web Service) • Home -> Maintenance -> Firmware Upgrade 1 2 3 4

  11. F/W Upgrade - IV 1. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upload 1 2 3

  12. F/W Upgrade - V 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upload

  13. F/W Upgrade - VI 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upload

  14. F/W Upgrade – VII 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upgrade -> Upgrade 1 2 3 4

  15. F/W Upgrade – VIII 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upgrade -> Upgrade

  16. F/W Upgrade – VIIII 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upgrade -> Upgrade

  17. F/W Upgrade – X 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home -> Maintenance -> Firmware Upgrade -> Upgrade

  18. Information print • Using Stop button

  19. Setup in Status Monitor (SM) • Power Save • 5/10/15/20/30/45/60/120(minutes) • Auto Continue • If auto continue set to ON, Printer automatically paper out after 30 sec in paper mismatch state • Altitude • Normal / High 1 / High 2 / High 3 • Engine F/W change voltage condition as altitude • Color • Color density

  20. NVRAM • NVRAM (or EEPROM) • Non-Volatile RAM • SPI (Serial port interface) • Purpose • To store Printer system and network configuration information • Size • CLP-310/CLP-310N : 8KBytes • CLP-310W : 32Kbyte

  21. Consumables Information • Initial Toner • Black : 1000 pages • Color : 700 pages • Regular Toner (for sale) • Black : 1500 pages • Color : 1000 pages • Imaging Unit • 24000 pages

  22. Error List - I • Display in Status Monitor window • Consumables Life Errors • Toner Low • Toner Replace • Toner empty • Replace transfer belt soon • Replace transfer belt • Replace fuser soon • Replace fuser • Replace imaging unit soon • Replace imaging unit • Replace Pickup tray 1 roller • Need to replace those items when replace error is indicated

  23. Error List - II • Invalid toner • Invalid Yellow [Magenta/Cyan/Black] toner kit • Mismatch Model Name, Supplier ID, Company Name, etc. • Not install • Yellow[M/C/K] Toner cartridge is not installed • Service call error • Fuser Low (Over) heat error • LSU error • Transfer belt error • Dev. Home error • Motor Lock error

  24. Error - III • Paper • Paper Jam at the tray1 • Paper Jam inside printer • Paper Jam at the paper exit area -> Open cover and remove jammed paper • Paper mismatch in the tray 1 • Load specified paper in the tray 1

  25. Error - IV • Use Status Monitor (SM) • to check set status • to see occurred errors • Use Configuration Sheet • to check F/W version • to check Consumables Problems

  26. Q & A Thank You!!

  27. Q1) Select the best way to check Error status. 1 1. Check Status Monitor 2. Check System Configuration Report 3. Check Network Configuration 4. Check Demo Page Q2) Select the best way to see Firmware version? 2 1. Demo Page 2. Configuration Sheet 3. Error Log 4. There is no way to see it. Q3) What is the best checking method When Consumables problems are occurred? 3 1. Print Error Log 2. Supplies Information 3. Configuration sheet 4. Demo Page

More Related