1 / 26

MSC 132/134 Fishing Gear Technology I & II

MSC 132/134 Fishing Gear Technology I & II. Calculating and Cutting Netting Tapers. Excerpts from: Calculations for Fishing Gear Designs , A.L. Fridman, Fishing News Books Ltd., Surrey, England. 1986

amber-drake
Download Presentation

MSC 132/134 Fishing Gear Technology I & II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MSC 132/134Fishing Gear Technology I & II Calculating and Cutting Netting Tapers Excerpts from: Calculations for Fishing Gear Designs, A.L. Fridman, Fishing News Books Ltd., Surrey, England. 1986 FAO Catalogue of Small Scale Fishing Gear, Edited by C. Nedelec, Fishing News Books Ltd. & Whitefriars Press Ltd., London, England. 1975 Fisherman’s Workbook, Compiled by J. Prado, Fishing News Books, Oxford, England. 1990 How to Make & Set Nets, John Garner, Fishing News Books Ltd., Surrey, England. 1986.

  2. Machine Made Netting

  3. Cutting and Shaping Netting • The number of meshes at the start of the cut. • The number of meshes required at the end of the cut. • The length or depth in meshes of the section to be cut. All Points or “Siders” E2 = Depth (90º) Normal Direction All Meshes or Transverse E1 = Length (0º) Base of right angle All Bars 45 degree angle

  4. Resultant Angles for Net Tapers Assuming Meshes Are Hung At 71% E1 Value of 50%

  5. Common Cutting Rates & Taper Ratios

  6. Cuts: Netting Example

  7. Body TapersGuidelines and Formula • You can only cut or calculate a cut by evaluating one side of the intended shape or piece of netting . • Always establish which way your E values are oriented. • The body taper is only used if the material to be cut is less than the depth of the netting. 2 x Cut Depth - Cut Bars Points Body Taper = = Bottom - Top Cut = 2

  8. Body Taper: Calculations 180 meshes E1 2 Cut = 2 x 20 = 40 = 4 bars Depth – Cut 30 – 20 10 1 points 30 mesh 140 meshes 2 x Cut Depth - Cut Bars Points Body Taper = = Bottom - Top Cut = 2

  9. Body TapersCalculating the Cut • For calculation purposes – when applying the cut formula, always assume the bottom of the netting piece is represented by the larger mesh count. • When using the cut formula - if only one side of the netting piece will be cut, do not divide by 2. Bottom - Top Cut = 2 180 meshes CUT CUT 30 meshes 180 – 140 = 40 = 20 2 2 E1 140 meshes

  10. Body Taper: Cuts • When using the cut formula - if only one side of the netting piece will be cut, do not divide by 2. 140 meshes 60 mesh E1 Cut = 180 – 140 = 40 = 40 180 meshes 2 Cut = 2 x 40 = 80 = 8 bars Depth – Cut 60 – 40 20 2 points 2 x Cut Depth - Cut Bars Points Body Taper = = Bottom - Top Cut = 2

  11. Body Taper: Cuts 140 meshes • The body taper is only used if the material to be cut is less than the depth of the netting. 30 mesh E1 Cut = 180 – 140 = 40 = 40 180 meshes 2 Cut = 2 x 40 = 80 = 8 bars Depth – Cut 30 – 40 -10 -1 points 2 x Cut Depth - Cut Bars Points Body Taper = = Bottom - Top Cut = 2

  12. 3P2B

  13. Body Tapers: Calculations 3P2B

  14. Body Tapers: Calculations 200 M

  15. Body Tapers: Calculations Body Taper = 2 Cut Depth – Cut Bars Points = 200 M Cut = Top – Bottom ÷ 2 = 340 – 100 ÷ 2 = 120 Body Taper = 2 x 120 ÷ 200 – 120 = 240 Bars 80 Points = 3 Bars 1 Point Body Taper = 3 Bars 1 Point – however, even tapers are easier and neater to sew. A 6 Bar to 2 Point Body Taper (4B1P, 2B1P) is the same as a 3Bar to 1Point taper.

  16. Body Taper Examples 3 Bars 1 Point 2 Bars 1 Point 4 Bars 1 Point

  17. Jib TapersGuidelines and Formula • You can only cut or calculate a cut by evaluating one side of the intended shape or piece of netting . • Always establish which way your E values are oriented. • The jib taper is only used if the material to be cut is greater than the depth of the netting. • Length replaces the cut on jib tapers. (2 x Depth) - 2 Length -Depth + 1 Bars Meshes Jib Taper = =

  18. Jib Tapers: Calculations The base length of the right triangle represents the cut length. 20 P E1 38 Meshes (2 x 20) – 2 38 2 bars 38 – 20 + 1 19 1 mesh = = (2 x Depth) - 2 Length -Depth + 1 Bars Meshes Jib Taper = =

  19. Jib Tapers: Calculations Jib Taper (2 x Depth) - 2 Length -Depth + 1 Bars Mesh = = (2 x 36.5) – 2 73 – 2 71 73 – 36.5 + 1 36.5 + 1 37.5 = = 1.89 Bars 2 1 Mesh 1 = Tapers do not always work out “perfectly”. Your critical thinking skills are essential to properly apply various tapers and/or cutting rates.

  20. All Bar TapersGuidelines and Formula • You can only cut or calculate a cut by evaluating one side of the intended shape or piece of netting . • Always establish which way your E values are oriented. • If the “cut” or “length” is equal to the depth of the netting – you would have an all bar (AB) taper. • If statement #3 is true there are no calculations necessary.

  21. Tapers: Calculations Prove the “Taper” which is indicated on the circled “panel” shown in the trawl plans (A15) to the right.

  22. 31M 35M AB 31M 7P2B 62M 4M 2 Cut Depth – Cut Body Taper = Cut = Top – Bottom = 66 – 62 = 4 2 x 4 31 – 4 8 Bars 27 Pts. 2 Bars 6.75 Pts. 2 Bars 7 Points = = = Body Taper = • Keys to Finding and/or Proving the Taper: • You can only cut and/or calculate a cut by evaluating one side of the intended shape or piece of netting at a time. • An All Bar (AB) taper will yield a 45 degree angle, which means the “Cut” is equal to the “Depth” of the netting.

  23. Taper Examples Cutting Rate: 1N 2B (1 Point 2 Bars) Cutting Rate: 1T 2B (1 Mesh 2 Bars) Cutting Rate: 1N 2T (1 Point 2 Meshes)

  24. Drop Tapers 5 Meshes to 7 Meshes or 1 1 1 1 1 2 1 2 Drop Loops Added

  25. Identify the Tapers Shown Below

  26. CUT LOSS

More Related