Download
1 / 4
40 likes | 155 Views
Do you listen to that scientists could take aluminum after which use the micro-laser in order to shoot from the electrons leading to the aluminum to stay a type of matter that isn't normal, one which is clear? It's true also it was achieved by a few scientists from Germany. Right now, so much, they've just done an incredibly little bit of aluminum atoms by using this technique. For more info click here: http://www.secat.net
E N D
Aluminum Technology Do you listen to that scientists could take aluminum after which use the micro-laser in order to shoot from the electrons leading to the aluminum to stay a type of matter that isn't normal, one which is clear? It's true also it was achieved by a few scientists from Germany. Right now, so much, they've just done an incredibly little bit of aluminum atoms by using this technique.
Plate, Sheet & Foil Technology A customer experienced rejection of sheet metal due to the presence of inclusions. An analysis of the defects using optical and scanning electron microscopy revealed the presence of rolled-in impurities including iron. Using microstructural characterization, Secat identified inclusions in the sheet and suggested possible sources, which was traced to contamination in the lubrication. A series of corrective actions were recommended, which included improved filtering of the lubricant oils during the recycling process and periodic quality control checks of oil impurities.
This supplier's customers were experiencing production problems with billets obtained from a new source. Secat analyzed the billet microstructure, which revealed improper grain structure from the surface to the center. This grain structure irregularity was attributed to poor heat treatment or improper casting procedures during production. Secat recommended remedial steps during the billet production process to correct the problems. Billet/Extrusion Technology
