1 / 11

Gain Curves

Gain Curves. Jason for the SB Crew June 5, 2007. Raw 55 Fe Spectra. Start with 55 Fe spectrum from a MCA. Fit peak to gaussian. Calibration from a pulser turns channels into electrons. Mean of gaussian corresponds to signal from 109 electrons (in CF 4 ). Raw Curves.

alodie
Download Presentation

Gain Curves

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Gain Curves Jason for the SB Crew June 5, 2007

  2. Raw 55Fe Spectra • Start with 55Fe spectrum from a MCA. • Fit peak to gaussian. • Calibration from a pulser turns channels into electrons. • Mean of gaussian corresponds to signal from 109 electrons (in CF4).

  3. Raw Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • source rate: ~100 Hz

  4. Raw Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • source rate: ~100 Hz

  5. P/T Corrections • sealed volume in gain test box allows for easy P/T mapping. • in very good agreement with WIS. • Therefore, gain can be adjusted for P/T variations…

  6. P/T Corrected Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • corrected for P/T !! • source rate: ~100 Hz

  7. P/T Corrected Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • corrected for P/T !! • source rate: ~100 Hz

  8. Gain Saturation Curve • Sample gain every two minutes for 14 hours. • Fit saturation curve to saturating exponential. • Gives the ability to extrapolate gain.

  9. Completely Corrected Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • corrected for P/T !! • use extrapolated saturation curve to correct for time… • SB sees a factor of ~2 • source rate: ~100 Hz

  10. Completely Corrected Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • corrected for P/T !! • use extrapolated saturation curve to correct for time… • SB sees a factor of ~2 • source rate: ~100 Hz

  11. Completely Corrected Curves • Procedure: • 14 hour gain saturation curve • to fully charge up the stack • waited ~2 hours with voltage on • to verify stable gain • measured gain as a function of dV • corrected for P/T !! • use extrapolated saturation curve to correct for time… • source rate: ~100 Hz **note** the WIS data is from two different stacks… a gem was exchanged. --maybe not comparable.

More Related