1 / 17

GRAPHIC COMMUNICATION

GRAPHIC COMMUNICATION. Learning Outcomes. Click on a topic to enter the appropriate learning outcome. Unit Section Name Section. Technical Graphics 1 Estimated Perspective Section A. Technical Graphics 1 Tangency /Ellipse Section J.

alma-jordan
Download Presentation

GRAPHIC COMMUNICATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. GRAPHIC COMMUNICATION Learning Outcomes Click on a topic to enter the appropriate learning outcome Unit Section Name Section Technical Graphics 1 Estimated Perspective Section A Technical Graphics 1 Tangency /Ellipse Section J Technical Graphics 2 Sectional Drawing Section A Technical Graphics 2 Assembly Drawing Section B Technical Graphics 2 Exploded Drawing Section C Technical Graphics 2 Auxiliary Drawing Section D Technical Graphics 1 Measured Perspective Section B Technical Graphics 2 Location Drawing Section E Technical Graphics 1 Assembly Drawing Section F Technical Graphics 1 Exploded Views Section G Technical Graphics 1 Sectional Drawing Section H Technical Graphics 2 Dimensional Tolerance Section F Technical Graphics 1 Geometric Construction Section I Technical Graphics 1 Isometric Views Section C Technical Graphics 1 Oblique Views Section D Technical Graphics 1 Planometric Views Section E

  2. Section A - Estimated Perspective Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. Performance Criteria a) 1- and 2- point perspective sketches of appropriate subject matter are produced accurately in terms of scale and proportion. Sketching should be done in 1- and 2- point perspective as appropriate to the subject matter. Consideration of the spectator point should show the object to good effect. Information Sheets: Perspective View Points Picture plane Projection Methods Tutorials: A1. Estimated Perspective - 1point Revision work A2. Estimated Perspective - 2point Revision work A3. Crank and Handle Unit standard A7. Exploded Paper Punch Unit standard A10. Internal Perspective Kitchen Unit standard A14. Internal Perspective Room Unit standard Return to main page

  3. Section J - Tangency/Ellipse Technical Graphics 1 - Outcome 2 Apply manual techniques of geometric construction in the generation of orthographic drawings. Performance Criteria b) Constructions used to produce true shapes ellipses and tangency are appropriate to the purpose. Information Sheets: Tangency - Lines and arcs Tangency - Circles and arcs Ellipse - Trammel method Ellipse - Focal point and Concentric circle methods Tutorials: J 1. Tangency principles Introduction to tangency J 2. Lightbulb Introduction to tangency J 3. Shower Control Introduction to tangency J 4. Faring Unit standard J 5. Nivea bottle and Crash Helmet Unit standard J 6. Dunlop Logo Unit standard J 7. Rocker Arm Integrated tutorial J 8 Motor Bike Integrated tutorial Return to main page

  4. Section A – Sectional Drawing Technical Graphics 2 - Outcome 1 Apply manual techniques of orthographic projection to produce drawings of components, assemblies and locations. • Performance Criteria • A variety of orthographic drawings is produced which are effective and include sectional auxiliary and exploded views. • Drawings produced of components and assemblies are neat, accurate, effectively represent desired features and are in accordance with PP7308. • Scales used are appropriate as specified in PP7308 and PP7320. Technical Graphics 2 – Outcome 2 Apply the principles of dimensioning to orthographic production drawings. • Performance Criteria • Dimensions are accurate and in accordance with PP7308 and PP7320. • Dimensional tolerances on components are accurate and represented in accordance with PP7308. Information Sheets: Sectional Views Sections Hatching Tutorials: A1. Crank Handle Revision work A2. Trolley Sleeve Pin Revision work A4. Machine Arm Integrated tutorial A6. Tool Rest Base Integrated tutorial A10. Trolley Wheel Unit standard Return to main page

  5. Section B – Assembly Drawing Technical Graphics 2 - Outcome 1 Apply manual techniques of orthographic projection to produce drawings of components, assemblies and locations. • Performance Criteria • A variety of orthographic drawings is produced which are effective and include sectional auxiliary and exploded views. • Drawings produced of components and assemblies are neat, accurate, effectively represent desired features and are in accordance with PP7308. • Scales used are appropriate as specified in PP7308 and PP7320. Technical Graphics 2 – Outcome 2 Apply the principles of dimensioning to orthographic production drawings. • Performance Criteria • Dimensions are accurate and in accordance with PP7308 and PP7320. • Dimensional tolerances on components are accurate and represented in accordance with PP7308. Tutorials: B1. Window Handle Revision work B2. Roller Assembly Unit Standard B3. Webbed Pulley Assembly Unit Standard B4. Axle and Pulley Integrated tutorial B5 Belt Tensioner Unit Standard B6. Drilling Jig Integrated tutorial Return to main page

  6. Section C – Exploded Drawing Technical Graphics 2 - Outcome 1 Apply manual techniques of orthographic projection to produce drawings of components, assemblies and locations. • Performance Criteria • A variety of orthographic drawings is produced which are effective and include sectional auxiliary and exploded views. • Scales used are appropriate as specified in PP7308 and PP7320. Technical Graphics 2 – Outcome 2 Apply the principles of dimensioning to orthographic production drawings. • Performance Criteria • Dimensions are accurate and in accordance with PP7308 and PP7320. • Dimensional tolerances on components are accurate and represented in accordance with PP7308. Tutorials: C1. Universal Joint Unit standard C2. Trolley Castor Unit standard C4. Transfusion Set Integrated tutorial Return to main page

  7. Section D – Auxiliary Drawing Technical Graphics 2 - Outcome 1 Apply manual techniques of orthographic projection to produce drawings of components, assemblies and locations. • Performance Criteria • A variety of orthographic drawings is produced which are effective and include sectional auxiliary and exploded views. • Drawings produced of components and assemblies are neat, accurate, effectively represent desired features and are in accordance with PP7308. • Scales used are appropriate as specified in PP7308 and PP7320. Information Sheets: Auxiliary Construction Tutorials: D1. Plastic Letters Introductory work D2. Plastic Letters 2 Introductory work D3. Small Cottage Introductory work D4. Angled Bearing Introductory work D5 Bungalow Unit standard D6. Mountain Tent Unit standard D7. Coat Hook Unit standard D8. Church Unit standard D13 Nylon Spacer Unit standard Return to main page

  8. Section B - Measured Perspective Technical Graphics 2 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. Performance Criteria (d) The application of the ‘measured plan’ method of drawing 2-point measured perspective is correct. Drawing in 2-point perspectives. Construction using the projected plan method. Consideration of the spectator position to show the object to good effect is required. Information Sheets: Projected Plan Method - Picture Plane in front of the object. Projected Plan Method - Picture Plane behind the object. Tutorials: B1. Block Introductory work B2. Milk Carton 1 Introductory work B3. Milk Carton 2 Introductory work B4. Child’s Playhouse Introductory work B6. House Unit standard B7. Office Block Unit standard B8. Proposed Extension Unit standard B9. Kitchen Unit standard B10. Room Interior Unit standard B12. Bedroom Layout Unit standard Return to main page

  9. Section E – Location Drawing Technical Graphics 2 - Outcome 1 Apply manual techniques of orthographic projection to produce drawings of components, assemblies and locations. • Performance Criteria • Variety of orthographic drawings is produced which are effective and include sectional auxiliary and exploded views. • Drawings produced of locations are neat, accurate, represent desired features and are in accordance with PP7320 and PP7307. • Scales used are appropriate as specified in PP7308 and PP7320. Information Sheets: Location Drawing Introduction Site Plan Location Plan Tutorials: E1. Bungalow Site Plan Introductory work E2. Villa Site Plan Introductory work E3. Bungalow Floor Plan Unit standard E7. Changing Room Unit standard E9. Plot 35 Mains Circle Unit standard E10. Hillside Road Integrated tutorial E11. Kitchen Extension Integrated tutorial Return to main page

  10. Section F – Assembly Drawing Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. • Performance Criteria • Isometric and oblique drawings of assembled and exploded parts and sections are accurately produced. • Assemblies should consist of at least three parts. A series of sketches/drawings showing assembly sequence would be appropriate. Tutorials: F1. Paper Punch Integrated tutorial F2. V Block Assembly Unit Standard F3. Camera Integrated tutorial Return to main page

  11. Section G – Exploded Drawing Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. • Performance Criteria • Isometric and oblique drawings of assembled and exploded parts and sections are accurately produced. • Exploded views may involve more than one axis of separation.. Tutorials: G1. Ornamental Cannon Unit Standard G2. Pulley Wheel Unit Standard G3. Clamping Mechanism Unit Standard Return to main page

  12. Section F – Sectional Drawing Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. • Performance Criteria • Isometric and oblique drawings of assembled and exploded parts and sections are accurately produced. • Exploded views may involve more than one axis of separation.. Tutorials: H1. Gear Box Cover Unit Standard H2. Pulley Wheel Unit Standard H3. Lens Holder Integrated tutorial Return to main page

  13. Section F – Dimensional Tolerances Technical Graphics 2 - Outcome 2 Apply the principles of dimensioning to orthographic production drawings. • Performance Criteria • Dimensions are accurate and in accordance with PP7308 and PP7320. • Dimensional tolerances on components are accurate and represented in accordance with PP7308. Information Sheets: Tolerances The need for Dimensional Tolerances The Selection of Dimensional Tolerances The Selection of Dimensional Tolerances Tutorials: F1. Trolley Housing Unit standard F2. Hinge Unit standard F3. Machine Component Unit standard F4. Casting Unit standard Return to main page

  14. Section I – Geometric Construction Technical Graphics 1 - Outcome 2 Apply manual techniques of geometric construction in the generation of orthographic drawings. • Performance Criteria • Constructions used to produce drawings of intersections, interpenetrations and developments of right prisms and cylinders are appropriate to the purpose and demonstrate effective use of the principles of plane and solid geometry. • Constructions used to produce true shapes, ellipses and tangency are appropriate to the purpose. Information Sheets: Intersection - Prisms at right angles Intersection - Cylinders at right angles Intersection - Cylinders at an angle Tutorials: I 2. Aerosol Cap Introduction to intersections I 3. Calculator Unit standard I 4. Machine Slide Integrated tutorial I 7. Dormer Window Integrated tutorial I 8 Lamp Housing Integrated tutorial I 10. Lamp Shade Integrated tutorial I 11. Vase Integrated tutorial I 12. Child’s Playhouse Unit standard I 13. Cylinders 1 Unit standard I 14. Cylinders 2 Unit standard I 15. Ventilation System Unit standard I 16. Cylinder and Hexagonal Prism Integrated tutorial Return to main page

  15. Section C – Isometric Drawing Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. • Performance Criteria • Isometric drawings of consumer products incorporating curves, oblique drawings of engineered components and planometric drawings of room interiors are produced accurately. Tutorials: C1. Compact Disc Player Revision C2. Ribbon Case Unit Standard C6. Downpipe Clip Unit standard Return to main page

  16. Section D – Oblique Drawing Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. • Performance Criteria • Isometric drawings of consumer products incorporating curves, oblique drawings of engineered components and planometric drawings of room interiors are produced accurately. Tutorials: D1. Truck Cabin Revision D2. Thermostat Control Unit Unit Standard D3. Trolley Castor Unit Standard Return to main page

  17. Section E – Planometric Drawing Technical Graphics 1 - Outcome 1 Apply manual techniques of pictorial representation to suit a range of subject matter. • Performance Criteria • Isometric drawings of consumer products incorporating curves, oblique drawings of engineered components and planometric drawings of room interiors are produced accurately. Tutorials: E1. Graphics Studio Revision E6. Study Unit Standard E7. Bedroom Unit Standard Return to main page

More Related