1 / 13

Senior Design Ideas

Senior Design Ideas. Team INASAD Members: Jose Medina Joseph Leone Andrew Merk Alex Sanders Michael Fox. Agenda:. Past Events Prototype Review I Current Events Prototype Review II Future Events Prototype Review III Website Review. 2. Past Events.

Download Presentation

Senior Design Ideas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Senior Design Ideas Team INASAD Members: Jose Medina Joseph Leone Andrew Merk Alex Sanders Michael Fox

  2. Agenda: • Past Events • Prototype Review I • Current Events • Prototype Review II • Future Events • Prototype Review III • Website Review 2

  3. Past Events • Group met Wednesday 3/25 to discuss • Plan of action for continued material purchases • Timeline for material delivery to the machine shop • Possible project issues and solutions were discussed 3

  4. Newly Purchased Materials • Aluminum • Top and bottom tilt plates • Steel Rods • Tilts support bar and rotation rod • Polyethylene • Rotation housings and rotation Sled • Extension Spring • Securing tilt adjusting bar

  5. Aluminum • Purchased from Metal Supermarket • 1 6061 AL Plate • Size • ½” x 12” x 36”

  6. Steel Rods • 2 Rods purchased from Metal Supermarket • 1 CR round 1018 • Size • D1 = ¾” • L1 = 36” • D2 = ¼” • L2 = 48”

  7. Polyethylene • Material • Ultra-High Molecular Weight Polyethylene (UHMW) • Size • 36” x 5”x 1-½” • Finish • Smooth

  8. Extension Spring • Material • Steel music wire • Ends • Hooks • Overall Length • 1-7/16” • Diameter • OD = 11/32” WD =0.048” • Load/Deflection at Load • 8.54 lbs./0.38” • Spring Rate • 16.1 lbs./inch

  9. Materials Dropped off at the Machine Shop • Aluminum • Top and Bottom Tilt Plates

  10. Materials Dropped off at the Machine Shop • PVC • Tilting extension legs 10

  11. Materials Dropped off at the Machine Shop • Steel bar • Housing Rod 11

  12. Future Prototype Review III Suction cup decision More parts to be delivered to the Machine shop Compression spring to be purchased Rotation housing adjustments to be implemented Website Review 12

  13. INASAD Fluorescent Light Changing System 13

More Related