1 / 12

Physics of Sound Part 1

Physics of Sound Part 1. Sound waves How they are generated and travel. Sound Waves. Generation and Propagation Sound wave = changes in pressure caused by vibrating object Compression = High pressure Rarefaction = Low pressure Sound needs a medium to “vibrate”

allegra
Download Presentation

Physics of Sound Part 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Physics of SoundPart 1 Sound waves How they are generated and travel

  2. Sound Waves • Generation and Propagation • Sound wave = changes in pressure caused by vibrating object • Compression = High pressure • Rarefaction = Low pressure • Sound needs a medium to “vibrate” • Usually air, but could be anything • Speed of sound depends upon the medium

  3. Measuring sound waves • Sound waves are longitudinal waves • Vibrating object compresses the air around it. • Pushes air away leaving an area of low pressure • Vibrating object then compresses more air to create a “chain”

  4. Measuring methods Cycle • A single push and pull of the vibrating object • One are of compression followed by one area of rarefaction • An initial increase in atmospheric pressure from the norm, followed by a drop below the norm and then a return to normal • Mathematically displayed by a sine curve • Pressure on Y axis • Time on X axis

  5. Measuring methods Period (T) and Frequency (f) • Period - The time it takes to create one cycle • Frequency - The number of cycles in one second • Measured in Hertz (Hz) or cycles per second

  6. Measuring methods Example It takes ¼ sec to create one cycle. What is the sound wave’s frequency?

  7. Measuring methods • Frequency will determine pitch • High frequency = high pitch • Low frequency = low pitch • Octave – a doubling of halving of the frequency

  8. Measuring methods • Human hearing range • Low range between 15 to 30 Hz • With enough power lower than 15 Hz can be felt, buy not heard as “sound” • High range varies with age and gender • Women - up to 20 kHz • Men – between 15 to 18 kHz • High frequency range will lower with exposure to high levels of sound and age

  9. Tuning • Traditional orchestra would tune First Chair Violin A first. • Remaining instruments would tune relative to that • A above middle C was tuned to about 420 Hz • As halls grew larger it was found to be desirable to tune sharper • 1939 A was established to be 440 Hz • Corresponds to the 49th key on a full size piano • Tuning is not a science. The relative frequency difference is what is important

  10. Measuring methods Wavelength • The distance from one area of compression to the next or one area of rarefaction to the next l=wave length V = velocity of sound in medium usually 1130 ft/sec f = frequency

  11. Measuring methods • Amplitude • How high the pressure goes above and below normal atmospheric pressure • Corresponds to how loud the sound is • “loudness” is relative to frequency and dependant on the listener.

  12. Timber and Harmonics • Harmonics – multiples of a base frequency • Timber – the characteristics of a particular sound or instrument • Different harmonics combined in different levels • White Noise • Contains all frequencies at equal power • Equivalent to white light • Pink Noise • Contains all frequencies at equal power per octave • Homework • Read http://harada-sound.com/sound/handbook/

More Related