1 / 12

Boulder

Boulder. SCUBA-2: The next generation submillimetre camera for the James Clerk Maxwell Telescope. 2. Top Level Requirements. 2. Summary of main requirements. A fully-sampled image plane covering at least 8 arcmin-square. Per-pixel sensitivity of < 65 and 320mJy/  Hz at 850 and 450 m.

alka
Download Presentation

Boulder

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Boulder SCUBA-2: The next generation submillimetre camera for the James Clerk Maxwell Telescope 2 Top Level Requirements

  2. 2 Summary of main requirements • A fully-sampled image plane covering at least 8 arcmin-square • Per-pixel sensitivity of < 65 and 320mJy/Hz at 850 and 450m • Simultaneous operation at two wavelengths • A compact design allowing easy maintenance and support • Novel observing modes to improve image fidelity and map dynamic range • A high level of user support

  3. SCUBA-2 Field-of-view Array boundary Vignetted area ~11arcmin ~8 arcmin 64 arcmin2 95 arcmin2 (B) Minimum F-O-V (A) Maximum F-O-V

  4. 2 Pixel Details • An 8  8 arcmin field, fully-sampling the image plane:  6,500 pixels at 850m and 22,500 at 450m • Increase in mapping speed >> 100 at both wavelengths • Physical dimensions of array: • Pixel size >  to ensure good coupling • For final optics of f/2.5 the arrays are ~120mm in diameter

  5. Expected performance

  6. 2 Wavelengths of operation • Propose to operate a two fixed wavelengths • No equivalent of the SCUBA filter drum • Provision for changing filters if needed: e.g. 450m  350m • This will require a hardware change

  7. 2 Optical design • Complex design since need to re-image a large field-of-view onto a small array • Necessitates that SCUBA-2 be located on the Nasmyth platform • All mirror design with complex path • Mirrors will be large and aspheric in shape • expensive to manufacture...

  8. 2 Summary of main systemcomponents • Detectors: Transition-edge sensors with SQUID readouts • Electronics: Multiplexed SQUIDs and room temperature amplifiers • Filters: Fixed frequency operation at 450 and 850m • Cryogenics: Two compact 3He systems and two pulse- tube coolers • Cold optics: Re-imaging mirrors and array baffling; magnetic shielding for SQUIDs • Relay mirrors: To re-image beam onto Nasmyth platform • Data acquisition:VME crate (or similar) to fast workstation

  9. 2 Observing Modes • Calibration: Skydip and sky-cal • Flatfield: Use the sky to determine the flatfield • Stare-map: Simple point-and-shoot - similar to a CCD or IR array • Scan-map: Fast scanning, drift scanning or dithering method

  10. Some practical examples...

  11. Example: Deep Extragalactic Surveys SCUBA CFRS Survey 7 × 6.2 arcmin 22 sources > 3 rms noise ~ 1 mJy 78 hrs of Band 1/2 time SCUBA CFRS Survey (7 × 6.2 arcmin) 22 sources > 3 rms noise ~ 1.0 mJy 78 hrs of Band 1/2 time SCUBA-2 Survey in the same time to 1mJy rms ~ 2 degree2 ~ 1250 sources > 3

  12. 2 Summary: SCUBA-2 Goals • Field-of-view : At least 8 arcmin-square • Sensitivity : Sky background limited • Wavelengths : 450 and 850m • Mapping speed : >100 times that of SCUBA • Confusion limit : Achievable in about 2 hours • Cryogenics : Cryo-free (closed cycle systems) • On the telescope : In 5 years time!

More Related