Aluminium Ladder

1. The Essential Needs of Aluminium Ladders for Electrical and Outdoor Work Aluminium ladders are the go-to choice for electricians, plumbers or anyone who needs to get some work done which at a height that is not readily accessible. When the workers have to complete a task the is above their eye level; it is highly recommended they use some equipment like ladders to help them reach those elevations. Aluminium ladders come as the best option for electrical and outdoor work because of its traits like durability, light-weightedness, and affordability. With Aluminium ladders, the buyer has a plethora of options to choose, and sometimes it gets a bit confusing on which to choose. However, does choosing any aluminium ladder do you any good? The answer is a clear NO! The reason being that not all aluminium ladders are intended to be used for electrical repairs. Fret not; we will help you buy aluminium ladders for electrical and outdoor works that check all the boxes when it comes to compatibility, safety, and usability. I. Know which type of ladder to use (Pole vs. Step vs. Extension) The first mistake that many electricians make while using an aluminium ladder for electrical work is with the type of ladder that they choose. Many believe that a basic single pole aluminium ladder is the solution for every problem. But that is not the case at all. An aluminium stepladder is the best solution to fix electrical problems because of its higher stability. The four-point of contact that a stepladder has with the ground makes sure that the ladder doesn’t move about when the user shifts his/her weight. II. Rubber shoes are a must When you are working with electricity, you are in the hazardous environment. Therefore, proper care must be given to the equipment you are handling. If the ladder is on a surface that is wet or slippery, there is an increased chance that the ladder can slip. Also, if there are any live wires on the ground, it can come in contact with the water and electrify the aluminium ladder. So beefy rubber shoes on the end of the aluminium ladders will help is stay stable as well as from electricity. III. Make sure that it is insulated For a long time, aluminium ladders were considered an outcast when it came to electrically hazardous environments. This is was mainly because of the conductive nature that aluminium has and in environments where electricity is a concern, the ladders were considered unusable. But it changed with the arrival of electric shock proof aluminium ladders. Powder coated aluminium ladders will have a layer of insulating material above its surface. The benefits are two-fold, as the ladder will be insulated from electrocution as well as gains an aesthetic appeal. Note: Ensure that the powder coating on the metal is an insulator. IV. Ladder strength is critical When you are working with electricity, it is of utmost importance that you select a ladder that doesn’t fail when your weight is applied to it. Unwanted flex and twists can lead to instability and can cause harm to the worker.

2. V. Make sure that you have the right length Do not take any risks when it comes to working at a height higher than the length of the ladder, especially when it comes to electricity. Make sure that you have selected an aluminium ladder that extends beyond the point where it needs work. Note:Do not stand on the top 3 rungs while repairing something because it can cause the ladder to topple due to increased torque. General safety precautions while handling electrical repairs on a ladder Even if you have selected the right aluminium ladder for outdoor repairs or electrical works, human error can lead to unforeseen circumstances, in the worst-case scenario, fatality. Let us help you remind some of the most important things you should remember while standing on a ladder. 1)Do not overload the ladder: Even though Aluminium ladders are inherently strong, every material has its limits. Carrying heavy tools or hanging anything on the railings are not at all safe. 2)Never let more than one person use the ladder at the same time: Having two people on a lander at the same time is a sure shot recipe for disaster. 3)Never overreach to get to a spot: Even if it takes you two minutes to reposition the ladder, it is better than 1 month being in the hospital. 4)Never stand on the top pegs: If you can’t reach the height you want to reach with the current ladder, it’s better to get a lengthier one than stand on the top rungs of the ladder where it will be the most unstable. When you are buying a new aluminium ladder, make sure that you are buying it from a trusted dealer. Al-Humaidi Group has access to an array of hardware suppliers and manufacturers. We can provide you with the best quality products that meet every safety standard. Let us help you to make your work easier and safer.