1 / 9

Resolutions to Remaining CIDs

Resolutions to Remaining CIDs. Authors:. Date: 2014-07-16. Abstract. The submission discusses on CIDs 4509, 4900 and 5136. . CIDs 4509 and 4900. CID 4509 and 4900 have the exactly same comment:

alexia
Download Presentation

Resolutions to Remaining CIDs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Resolutions to Remaining CIDs Authors: • Date:2014-07-16 Jarkko Kneckt, Nokia

  2. Abstract • The submission discusses on CIDs 4509, 4900 and 5136. Jarkko Kneckt, Nokia

  3. CIDs 4509 and 4900 • CID 4509 and 4900 have the exactly same comment: • The FILS discovery mechansms(i.e. scanning) are really independent functions to FILS access mechansims (association/security protocols). They should be controled independently by different MIB variables rather than a single MIB variable. • ProposedChange in 4509: • Separate scanning functions from other protocol functions. • ProposedChange in 4900: • Separate scanning functions from other protocol functions. Replace dot11FILSActrivated with dot11FILSDiscovery for funcitons that involve scanning, and replace dot11FILSActivated with dot11FILSAccess for all other functions. The commentor would be willing to supply a contribution if necessary. Jarkko Kneckt, Nokia

  4. Discussion • FILS consists on followingoperations: • FILS Discoveryframe • Active scanningmechanisms • GAS / ANQP mechanisms • DifferentiatedLink Setup • HigherLayer Setup / IP Addressassignment • FILS Authentication • Many of thesefeaturescouldbeused as owncapability and theiruse is notrelated to otherissues Jarkko Kneckt, Nokia

  5. Discussion • The current 802.11ai has for all these features only a single MIB parameter • No work has been done to explain the use of each feature independently of other FILS features • Separatingfeaturesunderown MIB parameterscomplicates 802.11 specification • A lot of work to implementthechanges • Otherstandardisationbodies / groupsmaycontinuethedevelopment and selectthesuitabletopics for furtherdevelopment Jarkko Kneckt, Nokia

  6. ProposedResolution to CIDs 4509 and 4900 • REJECTED. The FILS operationsshouldbemanagedwith a single MIB parameter. Multiple MIB parameters to control FILS parameterscreatecomplexityand thebenefit to 802.11 standard is marginal. Jarkko Kneckt, Nokia

  7. CID 5136 • Comment: • The unit of kilobits per second used in "Minimum Delay Limit" is too small. Suggest to use "Mbps" instead of "kbps". Also 3 octets for the filed of "minimum data rate" could be reduced. • ProposedChange: • - • Clarification: • Thecommentdiscusses on theMinimum Data Ratefield of the FILS RequestParameterselement Jarkko Kneckt, Nokia

  8. Discussion on 5136 • Therelevantunitfor dependson the transmission rate of thePHY • 802.11ax performancemaybeverydifferentfrom 802.11ah • Theunitkbit/s allows 802.11ai to beused in lowerthroughputradios as well • 3 octetsfieldenablesenoughroom to indicatevalues Jarkko Kneckt, Nokia

  9. Proposed Resolution for CID5136 • REJECTED. 802.11ai hasdiscussed and selectedthisspecificformat. Theformatmaximizes802.11ai support for different PHY types. Thecommenter is requested to provideanyproposedchange. Jarkko Kneckt, Nokia

More Related