1 / 11

Ljus Skyla Project

Ljus Skyla Project. By Jessica Sanchez, Cole Basi , and Aiza Nasyrova. Three layers Ensui (Cones). Concept sketch. Layer 1 (30cm) Layer 2 (27cm) Layer 3 (24cm) Ariel View Side View Frontal View. Dimensions. Measurements Angles Identifying arcs. Identified measurements.

alena
Download Presentation

Ljus Skyla Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LjusSkyla Project By Jessica Sanchez, Cole Basi, and AizaNasyrova

  2. Three layers Ensui (Cones) Concept sketch

  3. Layer 1 (30cm) Layer 2 (27cm) Layer 3 (24cm) Ariel View Side View Frontal View Dimensions

  4. Measurements Angles Identifying arcs Identified measurements

  5. Chord measurements Diameter measurements Radius Chord Length

  6. indicate the radius indicate linear and angular measurements calculated the circumference of the whole circle Indicate circumfrences

  7. calculated the length of the arc use  the circumference the central angle and percentages calculate the length of a 90° arc Calculate the length of an arc

  8. On 7 triangles verify that it’s area is not smaller than 12cm2  and is not larger than 24cm2 Show step by step calculations Calculating the Area

  9. Use pattern form HW46 to show how it’s going to look like after rotation, reflection, and translation Pattern after Transformation

  10. Show layer with its overall size Indicated how the plane will be divided into sections that will fit into the engraver. Layers with its overall size

  11. Engrave a final product Glue parts together Final product

More Related