1 / 15

INSTALLATION

INSTALLATION. INSTALLATION. Be on Site to Start U p L arge D iameter P rojects Have contractor inspect loads as they arrive Don’t just sign for it; Inspect for damage Insure quantity is correct See that Installation guides are on site; confirm with super intendant Take Photos or Video

alder
Download Presentation

INSTALLATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. INSTALLATION

  2. INSTALLATION • Be on Site to Start Up Large Diameter Projects • Have contractor inspect loads as they arrive • Don’t just sign for it; Inspect for damage • Insure quantity is correct • See that Installation guides are on site; confirm with super intendant • Take Photos or Video • Good references • Good training aids • Can load on Website

  3. INSTALLATION • Review Basics of Installation Guide: • Handling requires care • Lower pipe; don’t kick off truck • Cold weather requires extra care • Store on a flat surface and protect from damage

  4. INSTALLATION • Review Basics of Installation Guide • Don’t place pipe on hard pan, sharp rock or boulders • Bell holes are required for proper assembly and support

  5. INSTALLATION • Review Basics of Installation Guide • Thoroughly Clean dirt and foreign material from gaskets and spigot • Once lubricated protect surfaces from dirt and debris • Lubricate spigot evenly, to insertion mark & gasket • Straight alignment is key to successful assembly (Max Offset 1 degree) • Protect the bell from the backhoe bucket when assembling • Do not insert spigot beyond insertion mark

  6. INSTALLATION • Review Basics of Installation Guide • Embedment materials need to fill all voids in haunch zone to meet deflection acceptance tests • 1.5 inch maximum particle size • Don’t dump material off edge of trench; lower to top of pipe

  7. INSTALLATION • Don't tell them how to install pipe • Just review basics; they are the experts • Take photos and make notes of your observations

  8. INSTALLATION

  9. INSTALLATION ASTM D2321 Table 1 Soil Classifications

  10. INSTALLATION ASTM D 2321 Table 2 Recommendations for Installation & Use of Soils

  11. INSTALLATION

  12. INSTALLATION

  13. INSTALLATION

  14. INSTALLATION

  15. INSTALLATION

More Related