1 / 18

Case Study – Phase 4 Transmitter Receiver Simulation

Case Study – Phase 4 Transmitter Receiver Simulation. Siddharth Nair G200901750 EE 578. Outline. Multipath Fading Introduction To OFDM OFDM Modulator Receiver Design Convolutional Coding BER Vs SNR Curve Q&A. Data Transmission Over Multipath Channel. OFDM.

alan-joseph
Download Presentation

Case Study – Phase 4 Transmitter Receiver Simulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Case Study – Phase 4 Transmitter Receiver Simulation Siddharth Nair G200901750 EE 578

  2. Outline • Multipath Fading • Introduction To OFDM • OFDM Modulator • Receiver Design • Convolutional Coding • BER Vs SNR Curve • Q&A

  3. Data Transmission Over Multipath Channel

  4. OFDM

  5. OFDM Symbol – Time Domain Courtesy : OFDM For Wireless Multimedia Communications – Richard Van Nee, Ramjee Prasad

  6. Cyclic Prefix Courtesy : OFDM For Wireless Multimedia Communications – Richard Van Nee, Ramjee Prasad

  7. OFDM Modulator Courtesy : http://upload.wikimedia.org/wikipedia/

  8. Receiver Design – OFDM Receiver Courtesy : http://upload.wikimedia.org/wikipedia/

  9. Receiver Design – ZF Equalizer Courtesy : http://www.dsplog.com/2008/10/24/mimo-zero-forcing/

  10. Simulation Parameters • OFDM • FFT Size = 128 • Cyclic Prefix = 64 • Subcarriers 1-10, 119-128 Nulled – Guard Bands • Subcarriers 61-69 Nulled To Avoid DC Components • Data Per OFDM Symbol = 100 QPSK Symbols • Baud Rate = 20MHz • Frequency Selective Channel • Tap Delays = 0, 2e-6, 2e-7 s • Tap Power (dB) = 0, -2, -10 • Symbols Per Frame = 4 • MIMO Configuration = 2 x 2

  11. Channels

  12. Constellations – No AWGN Added

  13. BER Vs SNR

  14. Simulation Parameters • OFDM • FFT Size = 128 • Cyclic Prefix = 16 • Subcarriers 1-10, 119-128 Nulled – Guard Bands • Subcarriers 61-69 Nulled To Avoid DC Components • Data Per OFDM Symbol = 100 QPSK Symbols • Baud Rate = 1MHz • Frequency Selective Channel • Tap Delays = [0 60 75 145 150 150 155 190 220 225 230 335 370 430 510 685 725 735 800 960 1020 1100 1210 1845] * 1e-9 • Tap Power (dB) = -6.4,-3.4,-2,-3,-5.2,-7,-1.9,-3.4,-3.4,-5.6,-7.4,-4.6,-7.8,-7.8,-9.3,-12,-8.5,-13.2,-11.2,-20.8,-14.5,-11.7,-17.2,-16.7 • Symbols Per Frame = 4 • MIMO Configuration = 2 x 2

  15. Channels

  16. Convolutional Coding HALF RATE CONVOLUTIONAL ENCODER

  17. BER Vs SNR

  18. THANK YOU !!QUESTIONS AND COMMENTS SIDDHARTH NAIR G200901750 EE-DEPT- KFUPM

More Related