1 / 60

Chapter 12: Fundamentals of Thermal Radiation

Chapter 12: Fundamentals of Thermal Radiation. Yoav Peles Department of Mechanical, Aerospace and Nuclear Engineering Rensselaer Polytechnic Institute. Objectives. When you finish studying this chapter, you should be able to:

akasper
Download Presentation

Chapter 12: Fundamentals of Thermal Radiation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 12: Fundamentals of Thermal Radiation Yoav Peles Department of Mechanical, Aerospace and Nuclear Engineering Rensselaer Polytechnic Institute

  2. Objectives When you finish studying this chapter, you should be able to: • Classify electromagnetic radiation, and identify thermal radiation, • Understand the idealized blackbody, and calculate the total and spectral blackbody emissive power, • Calculate the fraction of radiation emitted in a specified wavelength band using the blackbody radiation functions, • Understand the concept of radiation intensity, and define spectral directional quantities using intensity, • Develop a clear understanding of the properties emissivity, absorptivity, relflectivity, and transmissivity on spectral, directional, and total basis, • Apply Kirchhoff law’s law to determine the absorptivity of a surface when its emissivity is known, • Model the atmospheric radiation by the use of an effective sky temperature, and appreciate the importance of greenhouse effect.

  3. Introduction • Unlike conduction and convection, radiation does not require the presence of a material medium to take place. • Electromagnetic wavesor electromagnetic radiation ─ represent the energy emitted by matter as a result of the changes in the electronic configurations of the atoms or molecules. • Electromagnetic waves are characterized by their frequency n or wavelength l • c─the speed of propagation of a wave in that medium. (12-1)

  4. Thermal Radiation • Engineering application concerning electromagnetic radiation covers a wide range of wavelengths. • Of particular interest in the study of heat transfer is the thermal radiationemitted as a result of energy transitions of molecules, atoms, and electrons of a substance. • Temperatureis a measure of the strength of these activities at the microscopic level. • Thermal radiation is defined as the spectrum that extends from about 0.1 to 100mm. • Radiation is a volumetric phenomenon. However, frequently it is more convenient to treat it as a surface phenomenon.

  5. Blackbody Radiation • A body at a thermodynamic (or absolute) temperature above zero emits radiation in all directions over a wide range of wavelengths. • The amount of radiation energy emitted from a surface at a given wavelength depends on: • the material of the body and the condition of its surface, • the surface temperature. • A blackbody ─ the maximum amount of radiation that can be emitted by a surface at a given temperature. • At a specified temperature and wavelength, no surface can emit more energy than a blackbody. • A blackbody absorbs all incident radiation, regardless of wavelength and direction. • A blackbody emits radiation energy uniformly in all directions per unit area normal to direction of emission.

  6. (12-3) • The radiation energy emitted by a blackbody per unit time and per unit surface area (Stefan–Boltzmann law) s=5.67 X 10-8 W/m2·K4. • Examples of approximate blackbody: • snow, • white paint, • a large cavity with a small opening. • The spectral blackbody emissive power (12-4)

  7. The variation of the spectral blackbody emissive power with wavelength is plotted in Fig. 12–9. • Several observations can be made from this figure: • at any specified temperature a maximum exists, • at any wavelength, the amount of emitted radiation increases with increasing temperature, • as temperature increases, the curves shift to the shorter wavelength, • the radiation emitted by the sun (5780 K) is in the visible spectrum. • The wavelength at which the peak occurs is given by Wien’s displacement lawas (12-5)

  8. We are often interested in the amount of radiation emitted over some wavelength band. • The radiation energy emitted by a blackbody per unit area over a wavelength band from l=0 to l= l1 is determined from • This integration does not have a simple closed-form solution. Therefore a dimensionless quantity fl called the blackbody radiation functionis defined: • The values of fl are listed in Table 12–2. (12-7) (12-8)

  9. Table 12-2 ─ Blackbody Radiation Functions fl (12-8) (12-9)

  10. dAn Radiation Intensity • The direction of radiation passing through a point is best described in spherical coordinates in terms of the zenith angle qand the azimuth angle f. • Radiation intensity is used to describe how the emitted radiation varies with the zenith and azimuth angles. • A differentially small surface in space dAn, through which this radiation passes, subtends a solid angledw when viewed from a point on dA.

  11. The differential solid angle dw subtended by a differential area dSon a sphere of radius rcan be expressed as • Radiation intensity ─ the rate at which radiation energy is emitted in the (q,f) direction per unit area normal to this direction and per unit solid angle about this direction. (12-11) (12-13)

  12. (12-15) (12-16) • The radiation fluxfor emitted radiation is the emissive powerE • The emissive power from the surface into the hemisphere surrounding it can be determined by • For a diffusely emittingsurface, the intensity of the emitted radiation is independent of direction and thus Ie=constant: (12-14) (12-15)

  13. For a blackbody, which is a diffuse emitter, Eq. 12–16 can be expressed as • where Eb=sT4 is the blackbody emissive power. Therefore, the intensity of the radiation emitted by a blackbody at absolute temperature Tis (12-17) (12-18)

  14. Intensity of incident radiation Ii(q,f) ─ the rate at which radiation energy dG is incident from the (q,f) direction per unit area of the receiving surface normal to this direction and per unit solid angle about this direction. • The radiation flux incident on a surface from all directions is called irradiationG • When the incident radiation is diffuse: (12-19) (12-20)

  15. Radiosity(J)─ the rate at which radiation energy leaves a unit area of a surface in all directions: • For a surface that is both a diffuse emitter and a diffuse reflector, Ie+r≠f(q,f): (12-21) (12-22)

  16. Spectral Quantities ─ the variation of radiation with wavelength. • The spectral radiation intensity Il(l,q,f), for example, is simply the total radiation intensity I(q,f) per unit wavelength interval about l. • The spectral intensityfor emitted radiation Il,e(l,q,f) • Then the spectral emissive powerbecomes (12-23) (12-24)

  17. The spectral intensity of radiation emitted by a blackbody at a thermodynamic temperature Tat a wavelength l has been determined by Max Planck, and is expressed as • Then the spectral blackbody emissive power is (12-28) (12-29)

  18. Radiative Properties • Many materials encountered in practice, such as metals, wood, and bricks, are opaqueto thermal radiation, and radiation is considered to be a surface phenomenonfor such materials. • In these materials thermal radiation is emitted or absorbed within the first few microns of the surface. • Some materials like glass and water exhibit different behavior at different wavelengths: • Visible spectrum ─ semitransparent, • Infrared spectrum ─ opaque.

  19. Emissivity • Emissivity of a surface ─ the ratio of the radiation emitted by the surface at a given temperature to the radiation emitted by a blackbody at the same temperature. • The emissivity of a surface is denoted by e, and it varies between zero and one, 0≤e ≤1. • The emissivity of real surfaces varies with: • the temperatureof the surface, • the wavelength, and • the directionof the emitted radiation. • Spectral directional emissivity ─ the most elemental emissivity of a surface at a given temperature.

  20. (12-30) • Spectral directional emissivity • The subscripts l and q are used to designate spectraland directionalquantities, respectively. • The total directional emissivity (intensities integrated over all wavelengths) • The spectral hemisphericalemissivity (12-31) (12-32)

  21. (12-33) • The total hemispherical emissivity • Since Eb(T)=sT4 the total hemispherical emissivity can also be expressed as • To perform this integration, we need to know the variation of spectral emissivity with wavelength at the specified temperature. (12-34)

  22. Gray and Diffuse Surfaces • Diffuse surface ─ a surface which properties are independent of direction. • Gray surface─ surface properties are independent of wavelength.

  23. Absorptivity, Reflectivity, and Transmissivity • When radiation strikes a surface, part of it: • is absorbed (absorptivity,a), • is reflected (reflectivity,r), • and the remaining part, if any, is transmitted (transmissivity,t). • Absorptivity: • Reflectivity: • Transmissivity: (12-37) (12-38) (12-39)

  24. The first law of thermodynamics requires that the sum of the absorbed, reflected, and transmitted radiation be equal to the incident radiation. • Dividing each term of this relation by Gyields • For opaque surfaces, t=0, and thus • These definitions are for total hemispherical properties. (12-40) (12-41) (12-42)

  25. Like emissivity, these properties can also be defined for a specific wavelength and/or direction. • Spectral directionalabsorptivity • Spectral directionalreflectivity (12-43) (12-43)

  26. Spectral hemispherical absorptivity • Spectral hemisphericalreflectivity • Spectral hemisphericaltransmissivity (12-44) (12-44) (12-44)

  27. The average absorptivity, reflectivity, and transmissivity of a surface can also be defined in terms of their spectral counterparts as • The reflectivity differs somewhat from the other properties in that it is bidirectionalin nature. • For simplicity, surfaces are assumed to reflect in a perfectly specularor diffusemanner. (12-46)

  28. Kirchhoff’s Law • Consider a small body of surface area As, emissivity e, and absorptivity a at temperature Tcontained in a large isothermal enclosure at the same temperature. • Recall that a large isothermal enclosure forms a blackbody cavity regardless of the radiative properties of the enclosure surface. • The body in the enclosure is too small to interfere with the blackbody nature of the cavity. • Therefore, the radiation incident on any part of the surface of the small body is equal to the radiation emitted by a blackbody at temperature T. G=Eb(T)=sT4.

  29. The radiation absorbed by the small body per unit of its surface area is • The radiation emitted by the small body is • Considering that the small body is in thermal equilibrium with the enclosure, the net rate of heat transfer to the body must be zero. • Thus, we conclude that (12-47)

  30. The restrictive conditions inherent in the derivation of Eq. 12-47 should be remembered: • the surface irradiation correspond to emission from a blackbody, • Surface temperature is equal to the temperature of the source of irradiation, • Steady state. • The derivation above can also be repeated for radiation at a specified wavelength to obtain the spectral form of Kirchhoff’s law: • This relation is valid when the irradiation or the emitted radiation is independent of direction. • The form of Kirchhoff’s law that involves no restrictions is the spectral directional form (12-48)

  31. Atmospheric and Solar Radiation • The energy coming off the sun, called solar energy, reaches us in the form of electromagnetic waves after experiencing considerable interactions with the atmosphere. • The sun: • is a nearly spherical body. • diameter of D≈1.39X109 m, • mass of m≈2X1030 kg, • mean distance of L=1.5X1011 m from the earth, • emits radiation energy continuously at a rate of Esun≈3.8X1026W, • about 1.7X1017 W of this energy strikes the earth, • the temperature of the outer region of the sun is about 5800 K.

  32. (12-49) • The solar energy reaching the earth’s atmosphere is called the total solar irradianceGs, whose value is • The total solar irradiance (the solar constant) represents the rate at which solar energy is incident on a surface normal to the sun’s rays at the outer edge of the atmosphere when the earth is at its mean distance from the sun. • The value of the total solar irradiance can be used to estimate the effective surface temperature of the sun from the requirement that (12-50)

  33. The solar radiation undergoes considerable attenuationas it passes through the atmosphere as a result of absorption and scattering. • The several dips on the spectral distribution of radiation on the earth’s surface are due to absorption by various gases: • oxygen(O2) at about l=0.76 mm, • ozone(O3) • below 0.3 mm almost completely, • in the range 0.3–0.4 mm considerably, • some in the visible range, • water vapor(H2O)and carbon dioxide(CO2) in the infrared region, • dust particles and other pollutants in the atmosphere at various wavelengths.

  34. The solar energy reaching the earth’s surface is weakened considerably by the atmosphere and to about 950 W/m2 on a clear day and much less on cloudy or smoggy days. • Practically all of the solar radiation reaching the earth’s surface falls in the wavelength band from 0.3 to 2.5 mm. • Another mechanism that attenuates solar radiation as it passes through the atmosphere is scatteringor reflectionby air molecules and other particles such as dust, smog, and water droplets suspended in the atmosphere.

  35. The solar energy incident on a surface on earth is considered to consist of directand diffuseparts. • Direct solar radiationGD: the part of solar radiation that reaches the earth’s surface without being scattered or absorbed by the atmosphere. • Diffuse solar radiationGd: the scattered radiation is assumed to reach the earth’s surface uniformly from all directions. • Then the total solar energy incident on the unit area of a horizontal surface on the ground is: (12-49)

More Related