1 / 7

XP812 & 820 Summary

XP812 & 820 Summary. S.M. Kaye 4/10/08 T&T TSG Meeting. XP812: Study the Effect of Rotation on Confinement. Joule milestone related Use n=3 braking to slow plasma down, preferably to a new steady-state Assess energy confinement/transport at different rotation

Download Presentation

XP812 & 820 Summary

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. XP812 & 820 Summary S.M. Kaye 4/10/08 T&T TSG Meeting

  2. XP812: Study the Effect of Rotation on Confinement • Joule milestone related • Use n=3 braking to slow plasma down, preferably to a new steady-state • Assess energy confinement/transport at different rotation • Couple to Neon injection for impurity transport if ready (it was not) • Results (1.5 day ops) • Discharge reproducibility was wanting, and no steady-state was achieved (discharge terminated due to MHD first) • Fine rotation control elusive (all or nearly nothing) • Resonant coupling of applied field to n=1 mode • Some discharges that can be analyzed • At this point, no further XP time necessary • Reassess after introduction of Lithium

  3. Reduced Energy Is Observed At Lower Rotation, But…

  4. XP809 (ELM destabilization) produced a discharge that can be used for multiples studies- Effect of rotation on confinement- Momentum transport in the outer region

  5. XP820: Core Momentum Transport • Joule milestone related • Use beam blips to change plasma rotation in core for various Ip, BT • Determine perturbative cf, vpinch if v, v decoupled • Results (1 day ops) • Discharge reproducibility again was wanting (occasional MHD early, and often late) • Blips did not effect rotation, needed to go to steps • Obtained data over some Ip and BT range • 0.7 – 1.1 MA @ 4.5 kG, 0.4 – 5.5 kG @ 0.9 MA • Preliminary look indicates cf & vpinch determination possible • Some additional data obtained from XP822 (Stutman) • At this point, no further XP time necessary • Need to work on data obtained • Reassess after introduction of Lithium

  6. “Subtle” Change in Rotation when BT Varied at Constand Ip Core rotation seems not to depend on BT, but Te, Ti do - Need to perform perturbation analysis with change of torque BT = 0.40 T BT = 0.45 T BT = 0.55 T

  7. Focus analysis on beam step-up time Step-down time may be “polluted” by MHD effects

More Related