1 / 11

CERTAIN WAYS TO RAISE THE EFFICIENCY OF YOUR BOILERS

Today, not only the industry, but also living spaces have increased the demand for steam boilers, especially in terms of heating and power generation. Several well-known companies propose to reduce the blow-off from boilers, to prevent the boiler or air preheater tubes from corrosion and scaling.This article examines quite a few hints that can help improve the efficiency of your boiler.

adityausit
Download Presentation

CERTAIN WAYS TO RAISE THE EFFICIENCY OF YOUR BOILERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CERTAIN WAYS TO RAISE THE EFFICIENCY OF YOUR BOILERS

  2. Index • Reduction of air intake • How about installing an Economizer • Reduction in blow down • Switch to cheaper fuel • Work Of Air Preheater • Types of air preheaters

  3. Today, not only the industry, but also living spaces have increased the demand for steam boilers, especially in terms of heating and power generation. • Several well-known companies propose to reduce the blow-off from boilers, to prevent the boiler or air preheater tubes from corrosion and scaling. • This article examines quite a few hints that can help improve the efficiency of your boiler.

  4. Reduction of air intake • Did you know that a boiler is due to excessive air consumption? When less air is needed, the extra is automatically heated and released into the atmosphere. Setting the fuel air can be somewhat difficult but effective. • As it automatically leads to Carbon Black Deposit inside the chamber and even over the boiler tubes.

  5. How about installing an Economizer • If you do not find enough heat transfer surfaces, the economizer pipes can contain boiler water or feed water, as the temperature of the exhaust gases can be quite high. • Thus, these Economizer tubes filled with safety valves can prevent the boiler from overpressure damage.

  6. Reduction in blow down • It is about to control to the minimum and since the Steam is generated from the evaporation of water, the remaining are becoming more concentrated. • Switch to cheaper fuel • Natural gas and heating oil generally cost the same in comparison. So they switch to cheaper fuels, they can provide large amount of benefits.

  7. Apart from all these, did you know that heat loss from the skin of the boiler can be used back to burning? Yes, seamless pipe manufacturer advice by preheating the intake air in the furnace becomes more efficient. • http://www.maniks.com/manufacturer/air-preheater/

  8. So it is certainly feasible ways to increase the efficiency of your boiler. For more information and updates on boilers, pre-heated tubes, hydraulic tubes, keep an eye on this room. • Work Of Air Preheater • The operating mode of the air preheater in counter-current, co-current flow, co-current flow counter-current or cross-counter-current or cross-co-current flow. The design of the device depends on the media and temperature conditions of the application. For small construction finned tubes are suitable to arrange in a small space a lot of heating surface. Dust or other particles, so that deposits are expected, smooth tubes are preferably used, which are less prone to deposits and are easier to clean.

  9. In most applications, an air preheater is carried out in several stages, i.e. it consists of several individual heat exchangers connected in series on the air side. • They heat the air passing through them with wasted heat energy, therefore, air Preheaters are used in various areas such as boilers, industrial furnace units and hot air ventilation systems. The design of an air preheater depends on the application.

  10. Types of air preheaters • There are two basic types Of air preheaters • Rec recuperative or tubular typert • To regenerate or feed, give water • Let's discuss one by one shortly • Visit us: • http://www.maniks.com

More Related