1 / 15

VINYL PIPES

VINYL PIPES. & FITTINGS. U-PVC HI-PVC. JIS SERIES. -. -. -. +. +. +. ASAHI AV VINYL PIPES – U-PVC (HI-PVC). VP and VM plane end pipe U-PVC JIS K 6741 or 6742. VP and VM PIPES. VP plane end pipe HI-PVC JIS K 6742. UNIT: mm. Notes;

adelle
Download Presentation

VINYL PIPES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. VINYL PIPES & FITTINGS U-PVC HI-PVC JIS SERIES

  2. - - - + + + ASAHI AV VINYL PIPES – U-PVC (HI-PVC) VP and VM planeend pipe U-PVC JIS K 6741 or 6742 VP and VM PIPES VP plane end pipe HI-PVC JIS K 6742 UNIT: mm • Notes; • The maximum outer diameter(minimum diameter) is the largest(smallest) of outer diameter measurement at a location. • The average outer diameter is the average for outer diameter measurements made in a direction other than two parallel direction or a circumference measurement divided by 3.142. • The mass per unit length(m) in the table, which was calculated using a specific gravity of U-PVC(1.43) is only for information, not part of standards. • The length tolerance is +10mm or –10mm. • The pipe of VM350 and VM400 are confirmed as JIS K 6741 standard. • The pipe of HI-PVC is confirmed as JIS K6742 standard.

  3. - - + + ASAHI AV VINYL PIPES – U-PVC VU PIPES VU Pipe - JIS K6741 VU Plane end pipe U-PVC UNIT: mm • Notes; • The maximum outer diameter(minimum diameter) is the largest(smallest) of outer diameter measurement at a location. • The average outer diameter is the average for outer diameter measurements made in a direction other than two parallel direction or a circumference measurement divided by 3.142. • The mass per unit length(m) in the table, which was calculated using a specific gravity of U-PVC(1.43) is only for information, not part of standards. • The length tolerance is +10mm, –10mm.

  4. - + ASAHI AV TS FITTINGS Common Dimension for TS Socket Connection JIS K6743-1993 Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm Taper : 1/T Taper : 1/T UNIT: mm • Notes; • Tolerance for dimension (l )is +4mm, -0.5mm. • Sizes marked with * are according to AV original standard.

  5. ASAHI AV TS FITTINGS 90º ELBOW JIS K6743-1993 UNIT: mm Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm • Notes; • Tolerance for dimension (H) is +4mm, -0.5mm. • Sizes marked with * are according to AV original standard. SOCKET JIS K6743-1993 UNIT: mm Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm • Notes; • Tolerance for dimension (L) is +4.0mm, -4.0mm. • Sizes marked with * are according to AV original standard.

  6. ASAHI AV TS FITTINGS REDUCING SOCKET Nominal Size 13mm to 50mm JIS K6743-1993 Nominal Size 65mm to 150mm UNIT: mm Notes; • Tolerance for dimension (L) is +4mm, -4mm. • Sizes marked with * are according to AV original standard.

  7. ASAHI AV TS FITTINGS UNIT: mm TEE JIS K6743-1993 Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm • Notes; • Tolerance for dimension (H) is +5mm, -1mm. • Sizes marked with * are according to AV original standard. CAP JIS K6743-1993 UNIT: mm Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm Notes; • Tolerance for dimension (L) is +5mm, -0mm. • Sizes marked with * are according to AV original standard. • Dimension of R is from 1mm to 5mm.

  8. Nominal Size D t H D1 H1 HI-PVC *16 x 13 29.0 3.5 41 24.0 38 Available 20 x 13 33.0 3.5 46 24.0 40 Available *20 x 16 33.0 3.5 48 29.0 45 Available 25 x 13 40.0 4.0 51 24.0 43 Available *25 x 16 40.0 4.0 53 29.0 48 Available 25 x 20 40.0 4.0 55 33.0 53 Available 30 x 13 46.0 4.0 55 24.0 46 Available *30 x 16 46.0 4.0 57 29.0 51 Available 30 x 20 46.0 4.0 59 33.0 56 Available 30 x 25 46.0 4.0 62 40.0 61 Available 40 x 13 57.0 4.5 66 24.0 52 Available *40 x 16 57.0 4.5 68 29.0 57 Available 40 x 20 57.0 4.5 70 33.0 62 Available 40 x 25 57.0 4.5 73 40.0 67 Available 40 x 30 57.0 4.5 76 46.0 71 Available 50 x 13 70.0 5.0 74 24.0 58 Available *50 x 16 70.0 5.0 76 29.0 63 Available 50 x 20 70.0 5.0 78 33.0 68 Available 50 x 25 70.0 5.0 81 40.0 73 Available 50 x 30 70.0 5.0 84 46.0 77 Available 50 x 40 70.0 5.0 90 57.0 88 Available ASAHI AV TS FITTINGS REDUCING TEE JIS K6743-1993 Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm UNIT: mm • Notes; • Tolerance for dimension (H and H1) is +5mm, -1mm. • Sizes marked with * are according to AV original standard.

  9. ASAHI AV TS FITTINGS FAUCET ELBOW UNIT: mm • Notes; • Tolerance for dimension (H) is +5mm, -1mm. • Tolerance for dimension (H1) is +5mm, -2mm • Tolerance for dimension (l2) is +1mm, -1mm. • Caution; • Use seal tape and gasket at thread connection. • Do not use for connection between metal piping and U-PVC(HI-PVC) piping. • Please set proper piping support around Elbow.

  10. ASAHI AV TS FITTINGS 45º ELBOW JIS K6743-1993 UNIT: mm • Notes; • Tolerance for dimension (H) is +5mm, -1mm.

  11. ASAHI AV FITTINGS AV 45º BEND UNIT: mm AV 90º BEND UNIT: mm

  12. ASAHI AV LARGE SIZE FITTINGS AV SHORT ELBOW UNIT: mm AV 90º BEND UNIT: mm

  13. ASAHI AV LARGE SIZE FITTINGS AV 45º BEND UNIT: mm Maximum Permissible Working Pressure for AV Large Size Fittings at ambient temperature UNIT: MPa Maximum working pressure includes water hammer pressure on hydrostatic pressure.

  14. ASAHI AV LARGE SIZE FITTINGS AV SOCKET (THICK WALL) UNIT: mm AV REDUCING SOCKET UNIT: mm

  15. ASAHI AV LARGE SIZE FITTINGS AV TEE UNIT: mm AV REDUCING TEE UNIT: mm

More Related